[Wed May 23 19:55:24 2012] Detection parameters:
  Position = (256.4, 253.9) = 4 33 44.89 -13 17 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.7 +/- 36.4
  Background counts = 588.0
  Rate = 0.003 +/- 0.0007

[Wed May 23 19:55:24 2012] Off-axis axis estimate = 4.44'
[Thu May 24 08:16:37 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Thu May 24 08:16:37 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Thu May 24 08:16:37 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.969
[Thu May 24 08:16:37 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.65"
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src21.ximg exists
[Thu May 24 13:23:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src21.csv
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu May 24 13:23:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src21.csv
[Thu May 24 13:23:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu May 24 13:23:24 2012] Fit fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly