[Wed May 23 19:55:24 2012] Detection parameters:
  Position = (247.0, 292.3) = 4 33 47.70 -13 15 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.0 +/- 37.3
  Background counts = 652.4
  Rate = 0.003 +/- 0.0006

[Wed May 23 19:55:24 2012] Off-axis axis estimate = 3.76'
[Thu May 24 08:16:37 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Thu May 24 08:16:37 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Thu May 24 08:16:37 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.861
[Thu May 24 08:16:37 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.31"
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src23.ximg exists
[Thu May 24 13:23:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src23.csv
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu May 24 13:23:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src23.csv
[Thu May 24 13:23:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu May 24 13:23:24 2012] Fit fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly