[Wed May 23 19:55:22 2012] Detection parameters:
  Position = (428.5, 360.8) = 4 32 53.62 -13 10 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 247.3 +/- 21.0
  Background counts = 39.0
  Rate = 0.004 +/- 0.0003

[Wed May 23 19:55:24 2012] Off-axis axis estimate = 10.46'
[Thu May 24 08:16:37 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Thu May 24 08:16:37 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Thu May 24 08:16:37 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.038
[Thu May 24 08:16:37 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.66"
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src19.ximg exists
[Thu May 24 13:23:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src19.csv
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu May 24 13:23:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src19.csv
[Thu May 24 13:23:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu May 24 13:23:24 2012] Fit fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly