[Wed May 23 19:55:22 2012] Detection parameters:
  Position = (262.8, 266.6) = 4 33 42.98 -13 16 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1204.8 +/- 80.4
  Background counts = 810.6
  Rate = 0.03 +/- 0.002

[Wed May 23 19:55:24 2012] Off-axis axis estimate = 3.46'
[Thu May 24 08:16:37 2012] Using EEF radius (= 8.16 ")to estimate initial spatial extent for simple fitting
[Thu May 24 08:16:37 2012] Initial guess for spatial extent in simple fitting = 8.16"
[Thu May 24 08:16:37 2012] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.063
[Thu May 24 08:16:37 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.16"
[Thu May 24 13:23:23 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 24 13:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src2.csv
[Thu May 24 13:23:23 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 24 13:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src2.csv
[Thu May 24 13:23:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 24 13:23:24 2012] Fit fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly