[Wed May 23 19:55:23 2012] Detection parameters:
  Position = (257.7, 267.8) = 4 33 44.49 -13 16 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 636.5 +/- 46.1
  Background counts = 765.7
  Rate = 0.01 +/- 0.001

[Wed May 23 19:55:24 2012] Off-axis axis estimate = 3.69'
[Thu May 24 08:16:37 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Thu May 24 08:16:37 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Thu May 24 08:16:37 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.083
[Thu May 24 08:16:37 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.27"
[Thu May 24 13:23:23 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src8.ximg exists
[Thu May 24 13:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src8.csv
[Thu May 24 13:23:23 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu May 24 13:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src8.csv
[Thu May 24 13:23:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu May 24 13:23:24 2012] fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu May 24 13:23:24 2012] Fit fullrun_mos1_xmm0506260301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly