[Fri May  4 10:28:50 2012] Detection parameters:
  Position = (306.3, 331.1) = 5 35 41.12 -69 13 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 546.1 +/- 40.9
  Background counts = 379.3
  Rate = 0.007 +/- 0.0005

[Fri May  4 10:29:05 2012] Off-axis axis estimate = 2.43'
[Fri May  4 10:41:37 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Fri May  4 10:41:37 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Fri May  4 10:41:37 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.981
[Fri May  4 10:41:37 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 7.64"
[Sat May  5 02:07:34 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src74.ximg exists
[Sat May  5 02:07:34 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src74_1.ximg exists
[Sat May  5 02:07:34 2012] Fit fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src74 appears to have run properly
[Sat May  5 02:07:37 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Sat May  5 02:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src74.csv
[Sat May  5 02:07:37 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Sat May  5 02:07:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src74.csv
[Sat May  5 02:07:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:16:35 2012] Warning, spatial fit 74 centroid is now closest to src. 74
[Sat May  5 02:16:35 2012] Vigneting correction estimate = 1.000000
[Sat May  5 02:16:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 02:16:35 2012] Assessing source extent using major
[Sat May  5 02:16:35 2012] Source does appear to be extended
[Sat May  5 02:16:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 02:17:05 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Sat May  5 02:17:05 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Sat May  5 02:17:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.981
[Sat May  5 02:17:05 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 7.64"
[Sat May  5 15:53:53 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src70.ximg exists
[Sat May  5 15:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src70.csv
[Sat May  5 15:53:53 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src70_1.ximg exists
[Sat May  5 15:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src70.csv
[Sat May  5 15:53:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 15:53:56 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Sat May  5 15:53:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src70.csv
[Sat May  5 15:53:56 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Sat May  5 15:53:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src70.csv
[Sat May  5 15:53:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 16:03:18 2012] Spatial fit model total counts = 4980.360000, observed total counts = 4200.000000
[Sat May  5 16:03:18 2012] Poor agreement between spatial fit and data for source 77
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  5 16:03:19 2012] Vigneting correction estimate = 1.000000
[Sat May  5 16:03:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 16:03:19 2012] Assessing source extent using major
[Sat May  5 16:03:19 2012] Source does appear to be extended
[Sat May  5 16:03:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 16:04:01 2012] XMMSAS src. selection expression = ellipse(26598.645782, 28753.642792, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 16:04:01 2012] Writing source region out to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src77_src.reg
[Sat May  5 16:04:01 2012] Extracting stamp from image fullrun_pn_xmm0506220101_pi300-10000_cl_sm2.00.img.gz, (269, 294) - (344, 369)
[Sat May  5 16:04:02 2012] XMMSAS bgd. selection expression = annulus(26598.645782, 28753.642792, 1087.500000, 2175.000000, X, Y) && !ellipse(28011.582000, 25716.846200, 1577.428845, 1577.428845, 0.000000, X, Y) && !ellipse(26458.285004, 30952.896484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.706200, 30890.821400, 495.324014, 495.324014, 0.000000, X, Y) && !ellipse(27844.568000, 30894.656000, 1414.600041, 885.960025, 82.830000, X, Y) && !ellipse(26926.539246, 30595.558746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24753.776200, 29963.127000, 644.634419, 644.634419, 0.000000, X, Y) && !ellipse(24149.326000, 30108.660000, 1323.712038, 1323.712038, 0.000000, X, Y) && !ellipse(27176.159790, 29567.597778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29342.576000, 27039.578000, 1217.888035, 342.568810, 24.257000, X, Y) && !ellipse(28815.165131, 26422.346527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23601.361969, 26431.132019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.232000, 26076.974800, 1062.880031, 1062.880031, 0.000000, X, Y) && !ellipse(23955.404816, 25772.453766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.732178, 26402.558594, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sat May  5 16:04:02 2012] Writing fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src77.gif
[Sat May  5 22:05:06 2012] Mean detx,y = (-3220.04, -408.02) 
[Sat May  5 22:05:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 22:06:17 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 22:06:18 2012] Setting source spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Sat May  5 22:06:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Sun May  6 08:17:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  6 08:17:00 2012] rmf not generated due to insufficient counts
[Sun May  6 11:35:45 2012] Updating aperture counts using extracted products
[Sun May  6 11:35:45 2012] Error reading totcts from fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Sun May  6 11:35:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 11:35:59 2012] Using photon index=1.80, rate=0.00685, arf fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src77.arf
[Sun May  6 11:35:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 11:36:00 2012] Updating source flux to 2.3e-14
[Sun May  6 11:36:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting