[Fri May  4 10:28:37 2012] Detection parameters:
  Position = (291.5, 243.7) = 5 35 53.25 -69 20 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 593.8 +/- 129.5
  Background counts = 459.5
  Rate = 0.005 +/- 0.001

[Fri May  4 10:29:05 2012] Off-axis axis estimate = 4.00'
[Fri May  4 10:41:36 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Fri May  4 10:41:36 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Fri May  4 10:41:36 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.673
[Fri May  4 10:41:36 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.43"
[Sat May  5 02:07:33 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src7.ximg exists
[Sat May  5 02:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src7.csv
[Sat May  5 02:07:33 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat May  5 02:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src7.csv
[Sat May  5 02:07:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:07:35 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat May  5 02:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat May  5 02:07:35 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat May  5 02:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat May  5 02:07:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:16:34 2012] Spatial fit model total counts = 5177.700000, observed total counts = 3867.000000
[Sat May  5 02:16:34 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  5 02:16:35 2012] Vigneting correction estimate = 1.000000
[Sat May  5 02:16:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 02:16:35 2012] Assessing source extent using major
[Sat May  5 02:16:35 2012] Source does appear to be extended
[Sat May  5 02:16:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 02:17:05 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Sat May  5 02:17:05 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Sat May  5 02:17:05 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.673
[Sat May  5 02:17:05 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.43"
[Sat May  5 15:53:52 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src7.ximg exists
[Sat May  5 15:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src7.csv
[Sat May  5 15:53:52 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat May  5 15:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src7.csv
[Sat May  5 15:53:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 15:53:54 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat May  5 15:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat May  5 15:53:54 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat May  5 15:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat May  5 15:53:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 16:03:17 2012] Spatial fit model total counts = 5177.680000, observed total counts = 3867.000000
[Sat May  5 16:03:17 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  5 16:03:19 2012] Vigneting correction estimate = 1.000000
[Sat May  5 16:03:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 16:03:19 2012] Assessing source extent using major
[Sat May  5 16:03:19 2012] Source does appear to be extended
[Sat May  5 16:03:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 16:03:53 2012] XMMSAS src. selection expression = ellipse(25310.656555, 21153.897552, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 16:03:53 2012] Writing source region out to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src7_src.reg
[Sat May  5 16:03:53 2012] Extracting stamp from image fullrun_pn_xmm0506220101_pi300-10000_cl_sm2.00.img.gz, (254, 206) - (329, 281)
[Sat May  5 16:03:54 2012] XMMSAS bgd. selection expression = annulus(25310.656555, 21153.897552, 1087.500000, 2175.000000, X, Y) && !ellipse(26268.637600, 23345.606000, 1168.224034, 1168.224034, 0.000000, X, Y) && !ellipse(25865.902832, 24135.118439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24853.035706, 24060.766998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24397.716000, 23877.284000, 676.238419, 676.238419, 0.000000, X, Y) && !ellipse(25004.016602, 23199.430359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22647.420563, 22914.800598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24154.760345, 22611.025421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22196.260000, 22692.690000, 1324.352038, 1324.352038, 0.000000, X, Y) && !ellipse(27573.044189, 22418.182678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25447.225952, 22136.884979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26646.683228, 22228.369324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.209167, 21721.026413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28190.797821, 21537.298386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25781.905670, 21617.221405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27525.205872, 21152.339050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26743.947571, 20794.271179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23424.810486, 20988.410904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28206.860748, 20769.479843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.764435, 20570.600891, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 16:03:54 2012] Writing fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src7.gif
[Sat May  5 16:46:01 2012] Mean detx,y = (2753.96, 4187.58) 
[Sat May  5 16:46:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 16:47:20 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 16:47:20 2012] Setting source spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat May  5 16:47:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May  6 05:35:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  6 05:35:12 2012] rmf not generated due to insufficient counts
[Sun May  6 11:35:39 2012] Updating aperture counts using extracted products
[Sun May  6 11:35:39 2012] Error reading totcts from fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May  6 11:35:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 11:35:51 2012] Using photon index=1.80, rate=0.00542, arf fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src7.arf
[Sun May  6 11:35:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 11:35:52 2012] Updating source flux to 2.2e-14
[Sun May  6 11:36:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting