[Fri May 4 10:28:48 2012] Detection parameters: Position = (319.2, 356.0) = 5 35 30.56 -69 11 52.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 302.6 +/- 32.7 Background counts = 283.8 Rate = 0.004 +/- 0.0005 [Fri May 4 10:29:05 2012] Off-axis axis estimate = 4.44' [Fri May 4 10:41:36 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting [Fri May 4 10:41:36 2012] Initial guess for spatial extent in simple fitting = 8.65" [Fri May 4 10:41:36 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010 [Fri May 4 10:41:36 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 8.65" [Sat May 5 02:07:34 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src60.ximg exists [Sat May 5 02:07:34 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src60_1.ximg exists [Sat May 5 02:07:34 2012] Fit fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src60 appears to have run properly [Sat May 5 02:07:36 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists [Sat May 5 02:07:36 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists [Sat May 5 02:07:36 2012] Fit fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly [Sat May 5 02:16:35 2012] Spatial fit model total counts = 3808.160000, observed total counts = 3806.000000 [Sat May 5 02:16:35 2012] Offset between fit and detection position for source 62 = 0.815514 pixels [Sat May 5 02:16:35 2012] 3750.137000 total counts/ 3408.890000 bgd. counts: snr = 5.844702 Spatial fit parameters: Offset between fit and detection position for source 62 = 0.815514 pixels Position = (320.0, 356.4) = 5 35 29.95 -69 11 49.4 Extent = 11.2 (9.5-16.8)", rotation angle = 0 Source counts = 341.2 +/- 61.2 Background counts = 3408.9 Rate = 0.004 +/- 0.0006 [Sat May 5 02:16:35 2012] Vigneting correction estimate = 1.000000 [Sat May 5 02:16:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 5 02:16:35 2012] Assessing source extent using major axis lower bound [Sat May 5 02:16:35 2012] Source does appear to be extended [Sat May 5 02:16:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 5 02:16:35 2012] Source is confused with source 51 [Sat May 5 02:17:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat May 5 02:17:05 2012] Initial guess for spatial extent in simple fitting = 11.18" [Sat May 5 02:17:05 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954 [Sat May 5 02:17:05 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 11.18" [Sat May 5 15:53:53 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src57.ximg exists [Sat May 5 15:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src57.csv [Sat May 5 15:53:53 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src57_1.ximg exists [Sat May 5 15:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src57.csv [Sat May 5 15:53:53 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src57_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 5 15:53:55 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists [Sat May 5 15:53:55 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists [Sat May 5 15:53:55 2012] Fit fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly [Sat May 5 16:03:18 2012] Spatial fit model total counts = 3955.120000, observed total counts = 3952.000000 [Sat May 5 16:03:18 2012] Offset between fit and detection position for source 62 = 0.930580 pixels [Sat May 5 16:03:18 2012] Warning, changing simple spatial fit ID from 57 to 48 [Sat May 5 16:03:18 2012] 3849.956000 total counts/ 3405.860000 bgd. counts: snr = 7.609629 Spatial fit parameters: Offset between fit and detection position for source 62 = 0.930580 pixels Position = (320.6, 355.7) = 5 35 29.43 -69 11 52.4 Extent = 17.7 (13.8-35.4)" x 11.1 (8.2-14.3)", rotation angle = 83 (68-90) degrees Source counts = 444.1 +/- 62.0 Background counts = 3405.9 Rate = 0.005 +/- 0.0006 [Sat May 5 16:03:19 2012] Vigneting correction estimate = 1.000000 [Sat May 5 16:03:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 5 16:03:19 2012] Assessing source extent using major axis lower bound [Sat May 5 16:03:19 2012] Source does appear to be extended [Sat May 5 16:03:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97 [Sat May 5 16:04:00 2012] XMMSAS src. selection expression = ellipse(27844.568000, 30894.656000, 1060.950031, 664.470019, 82.830000, X, Y) [Sat May 5 16:04:00 2012] Writing source region out to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src62_src.reg [Sat May 5 16:04:00 2012] Extracting stamp from image fullrun_pn_xmm0506220101_pi300-10000_cl_sm2.00.img.gz, (260, 295) - (382, 417) [Sat May 5 16:04:00 2012] XMMSAS bgd. selection expression = annulus(27844.568000, 30894.656000, 1768.250051, 3536.500102, X, Y) && !ellipse(26278.757233, 33052.429932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25748.452301, 33825.022217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24928.207550, 34062.432281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.990845, 34047.983612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.989380, 33424.306610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23516.338000, 32693.000000, 1531.960044, 1531.960044, 0.000000, X, Y) && !ellipse(28500.830902, 31859.373932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.480000, 31876.602000, 924.288027, 924.288027, 0.000000, X, Y) && !ellipse(26458.285004, 30952.896484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.706200, 30890.821400, 495.324014, 495.324014, 0.000000, X, Y) && !ellipse(30414.860107, 30694.570099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26926.539246, 30595.558746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24753.776200, 29963.127000, 644.634419, 644.634419, 0.000000, X, Y) && !ellipse(24149.326000, 30108.660000, 1323.712038, 1323.712038, 0.000000, X, Y) && !ellipse(27176.159790, 29567.597778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26598.645782, 28753.642792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29342.576000, 27039.578000, 1217.888035, 342.568810, 24.257000, X, Y) && !ellipse(28115.732178, 26402.558594, 1740.000000, 1740.000000, 0.000000, X, Y) [Sat May 5 16:04:00 2012] Writing fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src62.gif [Sat May 5 21:03:04 2012] Mean detx,y = (-4667.02, -2509.53) [Sat May 5 21:03:20 2012] Setting backscal keywords in source and bgd. spectrum [Sat May 5 21:04:36 2012] Binned source spectrum to 10 counts/bin [Sat May 5 21:04:37 2012] Setting source spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src62_src_b10.pi.gz [Sat May 5 21:04:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src62_bgd.pi.gz [Sun May 6 11:35:43 2012] Updating aperture counts using extracted products [Sun May 6 11:35:43 2012] Error reading totcts from fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src62_src_b10.pi.gz [Sun May 6 11:35:58 2012] Calculating source flux in energy range 0.30-8.00 [Sun May 6 11:35:58 2012] Using photon index=1.80, rate=0.00463, arf fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src62.arf [Sun May 6 11:35:58 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 6 11:35:58 2012] Updating source flux to 1.5e-14 [Sun May 6 11:36:29 2012] Flag c found in src. 62 procflags, skipping spectral fitting