[Fri May  4 10:28:46 2012] Detection parameters:
  Position = (242.9, 358.5) = 5 36 32.84 -69 11 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 532.2 +/- 35.5
  Background counts = 326.7
  Rate = 0.005 +/- 0.0003

[Fri May  4 10:29:05 2012] Off-axis axis estimate = 5.93'
[Fri May  4 10:41:36 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Fri May  4 10:41:36 2012] Initial guess for spatial extent in simple fitting = 9.39"
[Fri May  4 10:41:36 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.848
[Fri May  4 10:41:36 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 9.39"
[Sat May  5 02:07:34 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src52.ximg exists
[Sat May  5 02:07:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src52.csv
[Sat May  5 02:07:34 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src52_1.ximg exists
[Sat May  5 02:07:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src52.csv
[Sat May  5 02:07:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:07:36 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sat May  5 02:07:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Sat May  5 02:07:36 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sat May  5 02:07:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Sat May  5 02:07:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:16:34 2012] Spatial fit model total counts = 5322.960000, observed total counts = 4412.000000
[Sat May  5 02:16:34 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  5 02:16:35 2012] Vigneting correction estimate = 1.000000
[Sat May  5 02:16:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 02:16:35 2012] Assessing source extent using major
[Sat May  5 02:16:35 2012] Source does appear to be extended
[Sat May  5 02:16:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 02:16:35 2012] Source is confused with source 16
[Sat May  5 02:17:05 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Sat May  5 02:17:05 2012] Initial guess for spatial extent in simple fitting = 9.39"
[Sat May  5 02:17:05 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.848
[Sat May  5 02:17:05 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 9.39"
[Sat May  5 15:53:53 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src50.ximg exists
[Sat May  5 15:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src50.csv
[Sat May  5 15:53:53 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src50_1.ximg exists
[Sat May  5 15:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src50.csv
[Sat May  5 15:53:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 15:53:55 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sat May  5 15:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sat May  5 15:53:55 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sat May  5 15:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sat May  5 15:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 16:03:17 2012] Source 53 is offset by -1.387134 and 2.182278 pixels which is larger than
2 X fitted extent = 1.292046 x 1.292046, not incorporating fit results
[Sat May  5 16:03:18 2012] Spatial fit model total counts = 5385.960000, observed total counts = 4412.000000
[Sat May  5 16:03:18 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  5 16:03:19 2012] Vigneting correction estimate = 1.000000
[Sat May  5 16:03:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 16:03:19 2012] Assessing source extent using major
[Sat May  5 16:03:19 2012] Source does appear to be extended
[Sat May  5 16:03:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 16:03:59 2012] XMMSAS src. selection expression = ellipse(21088.083359, 31142.622223, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 16:03:59 2012] Writing source region out to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src53_src.reg
[Sat May  5 16:03:59 2012] Extracting stamp from image fullrun_pn_xmm0506220101_pi300-10000_cl_sm2.00.img.gz, (205, 321) - (280, 396)
[Sat May  5 16:03:59 2012] XMMSAS bgd. selection expression = annulus(21088.083359, 31142.622223, 1087.500000, 2175.000000, X, Y) && !ellipse(18530.540100, 28945.211121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20299.110870, 29955.173645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22636.677600, 33694.225000, 1591.560046, 653.600819, 324.620400, X, Y) && !ellipse(20619.940000, 31907.038000, 1549.432045, 1549.432045, 0.000000, X, Y) && !ellipse(23381.846802, 33805.884766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23516.338000, 32693.000000, 1531.960044, 1531.960044, 0.000000, X, Y) && !ellipse(22197.326000, 32998.337680, 1267.560036, 1267.560036, 0.000000, X, Y) && !ellipse(22281.177856, 32409.533173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.180000, 33186.918478, 1579.528045, 754.927222, 323.669000, X, Y) && !ellipse(20554.631200, 31863.254000, 544.680816, 544.680816, 0.000000, X, Y) && !ellipse(23347.663300, 30612.773956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20479.204163, 31262.204742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21996.781738, 30214.644348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.326000, 30108.660000, 1323.712038, 1323.712038, 0.000000, X, Y) && !ellipse(20921.752411, 30134.799652, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  5 16:03:59 2012] Writing fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src53.gif
[Sat May  5 20:45:09 2012] Mean detx,y = (-8031.26, 3386.46) 
[Sat May  5 20:45:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 20:46:05 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 20:46:05 2012] Setting source spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat May  5 20:46:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sun May  6 07:35:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  6 07:35:26 2012] rmf not generated due to insufficient counts
[Sun May  6 11:35:43 2012] Updating aperture counts using extracted products
[Sun May  6 11:35:43 2012] Error reading totcts from fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun May  6 11:35:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 11:35:57 2012] Using photon index=1.80, rate=0.00486, arf fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src53.arf
[Sun May  6 11:35:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 11:35:57 2012] Updating source flux to 2.7e-14
[Sun May  6 11:36:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting