[Fri May  4 10:28:44 2012] Detection parameters:
  Position = (284.5, 384.7) = 5 35 58.90 -69 9 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.8 +/- 22.9
  Background counts = 336.6
  Rate = 0.002 +/- 0.0002

[Fri May  4 10:29:05 2012] Off-axis axis estimate = 6.34'
[Fri May  4 10:41:36 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Fri May  4 10:41:36 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Fri May  4 10:41:36 2012] source mask rpix=2.2, npix_max = 29, mask sum = 19, frac = 0.649
[Fri May  4 10:41:36 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 9.60"
[Sat May  5 02:07:33 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src42.ximg exists
[Sat May  5 02:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src42.csv
[Sat May  5 02:07:33 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat May  5 02:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src42.csv
[Sat May  5 02:07:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:07:36 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat May  5 02:07:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sat May  5 02:07:36 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat May  5 02:07:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sat May  5 02:07:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:16:34 2012] Warning, spatial fit 42 centroid is now closest to src. 25
[Sat May  5 02:16:35 2012] Vigneting correction estimate = 1.000000
[Sat May  5 02:16:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 02:16:35 2012] Assessing source extent using major
[Sat May  5 02:16:35 2012] Source does appear to be extended
[Sat May  5 02:16:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 02:17:05 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Sat May  5 02:17:05 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Sat May  5 02:17:05 2012] source mask rpix=2.2, npix_max = 29, mask sum = 19, frac = 0.649
[Sat May  5 02:17:05 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 9.60"
[Sat May  5 15:53:53 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src40.ximg exists
[Sat May  5 15:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src40.csv
[Sat May  5 15:53:53 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src40_1.ximg exists
[Sat May  5 15:53:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src40.csv
[Sat May  5 15:53:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 15:53:55 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Sat May  5 15:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sat May  5 15:53:55 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Sat May  5 15:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sat May  5 15:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 16:03:17 2012] Warning, spatial fit 40 centroid is now closest to src. 26
[Sat May  5 16:03:19 2012] Vigneting correction estimate = 1.000000
[Sat May  5 16:03:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 16:03:19 2012] Assessing source extent using major
[Sat May  5 16:03:19 2012] Source does appear to be extended
[Sat May  5 16:03:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 16:03:59 2012] XMMSAS src. selection expression = ellipse(24702.989380, 33424.306610, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 16:03:59 2012] Writing source region out to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src43_src.reg
[Sat May  5 16:03:59 2012] Extracting stamp from image fullrun_pn_xmm0506220101_pi300-10000_cl_sm2.00.img.gz, (247, 347) - (322, 422)
[Sat May  5 16:03:59 2012] XMMSAS bgd. selection expression = annulus(24702.989380, 33424.306610, 1087.500000, 2175.000000, X, Y) && !ellipse(26278.757233, 33052.429932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22636.677600, 33694.225000, 1591.560046, 653.600819, 324.620400, X, Y) && !ellipse(25748.452301, 33825.022217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24928.207550, 34062.432281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22187.046000, 35674.928200, 390.219211, 390.219211, 0.000000, X, Y) && !ellipse(24378.990845, 34047.983612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23381.846802, 33805.884766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23516.338000, 32693.000000, 1531.960044, 1531.960044, 0.000000, X, Y) && !ellipse(22197.326000, 32998.337680, 1267.560036, 1267.560036, 0.000000, X, Y) && !ellipse(22281.177856, 32409.533173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.180000, 33186.918478, 1579.528045, 754.927222, 323.669000, X, Y) && !ellipse(27450.480000, 31876.602000, 924.288027, 924.288027, 0.000000, X, Y) && !ellipse(26458.285004, 30952.896484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.706200, 30890.821400, 495.324014, 495.324014, 0.000000, X, Y) && !ellipse(23347.663300, 30612.773956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27844.568000, 30894.656000, 1414.600041, 885.960025, 82.830000, X, Y) && !ellipse(26926.539246, 30595.558746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.326000, 30108.660000, 1323.712038, 1323.712038, 0.000000, X, Y)
[Sat May  5 16:03:59 2012] Writing fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src43.gif
[Sat May  5 20:21:16 2012] Mean detx,y = (-8341.51, -890.03) 
[Sat May  5 20:21:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 20:22:17 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 20:22:19 2012] Setting source spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat May  5 20:22:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun May  6 07:09:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  6 07:09:05 2012] rmf not generated due to insufficient counts
[Sun May  6 11:35:42 2012] Updating aperture counts using extracted products
[Sun May  6 11:35:42 2012] Error reading totcts from fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun May  6 11:35:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 11:35:56 2012] Using photon index=1.80, rate=0.00164, arf fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src43.arf
[Sun May  6 11:35:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 11:35:56 2012] Updating source flux to 1e-14
[Sun May  6 11:36:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting