[Fri May 4 10:28:36 2012] Detection parameters: Position = (264.0, 338.9) = 5 36 15.68 -69 13 5.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1953.3 +/- 63.4 Background counts = 382.2 Rate = 0.03 +/- 0.0009 [Fri May 4 10:29:05 2012] Off-axis axis estimate = 3.85' [Fri May 4 10:41:36 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting [Fri May 4 10:41:36 2012] Initial guess for spatial extent in simple fitting = 8.35" [Fri May 4 10:41:36 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.853 [Fri May 4 10:41:36 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.35" [Sat May 5 02:07:32 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src4.ximg exists [Sat May 5 02:07:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src4.csv [Sat May 5 02:07:32 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src4_1.ximg exists [Sat May 5 02:07:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src4.csv [Sat May 5 02:07:32 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 5 02:07:35 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Sat May 5 02:07:35 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Sat May 5 02:07:35 2012] Fit fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Sat May 5 02:16:34 2012] Warning, spatial fit 4 centroid is now closest to src. 70 [Sat May 5 02:16:35 2012] Source 4 is offset by 1.773997 and -6.157429 pixels which is larger than 2 X fitted extent = 4.992552 x 4.992552, not incorporating fit results [Sat May 5 02:16:35 2012] Source 4 is offset by 0.955169 and -5.029452 pixels which is larger than 2 X fitted extent = 4.566000 x 4.566000, not incorporating fit results [Sat May 5 02:16:35 2012] Spatial fit model total counts = 5211.590000, observed total counts = 5139.000000 [Sat May 5 02:16:35 2012] Offset between fit and detection position for source 4 = 3.073569 pixels [Sat May 5 02:16:35 2012] Warning, changing simple spatial fit ID from 4 to 62 [Sat May 5 02:16:35 2012] 5175.739000 total counts/ 4970.860000 bgd. counts: snr = 2.905907 Spatial fit parameters: Offset between fit and detection position for source 4 = 3.073569 pixels Position = (261.1, 339.9) = 5 36 18.06 -69 13 1.0 Extent = 17.7 (17.7-35.4)", rotation angle = 0 Source counts = 204.9 +/- 71.9 Background counts = 4970.9 Rate = 0.002 +/- 0.0007 [Sat May 5 02:16:35 2012] Vigneting correction estimate = 1.000000 [Sat May 5 02:16:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 5 02:16:35 2012] Assessing source extent using major axis lower bound [Sat May 5 02:16:35 2012] Source does appear to be extended [Sat May 5 02:16:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 5 02:16:35 2012] Source is confused with source 64 [Sat May 5 02:16:35 2012] Source is confused with source 70 [Sat May 5 02:17:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat May 5 02:17:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat May 5 02:17:05 2012] Initial guess for spatial extent in simple fitting = 17.70" [Sat May 5 02:17:05 2012] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.970 [Sat May 5 02:17:05 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 17.70" [Sat May 5 15:53:52 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src4.ximg exists [Sat May 5 15:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src4.csv [Sat May 5 15:53:52 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src4_1.ximg exists [Sat May 5 15:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src4.csv [Sat May 5 15:53:52 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src4_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 5 15:53:54 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Sat May 5 15:53:54 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Sat May 5 15:53:54 2012] Fit fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly [Sat May 5 16:03:17 2012] Warning, spatial fit 4 centroid is now closest to src. 84 [Sat May 5 16:03:18 2012] Spatial fit model total counts = 5198.870000, observed total counts = 5139.000000 [Sat May 5 16:03:18 2012] Offset between fit and detection position for source 4 = 0.106256 pixels [Sat May 5 16:03:18 2012] Warning, changing simple spatial fit ID from 4 to 59 [Sat May 5 16:03:18 2012] 5160.753300 total counts/ 5117.540000 bgd. counts: snr = 0.604069 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.106256 pixels Position = (261.0, 339.9) = 5 36 18.15 -69 13 1.0 Extent = 4.3 (2.2-8.9)", rotation angle = 0 Source counts = 43.2 +/- 71.8 Background counts = 5117.5 Rate = 0.0005 +/- 0.0007 Deleting source due to low Poisson probability