[Fri May  4 10:28:36 2012] Detection parameters:
  Position = (213.6, 333.3) = 5 36 56.94 -69 13 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1980.4 +/- 56.8
  Background counts = 267.6
  Rate = 0.02 +/- 0.0005

[Fri May  4 10:29:05 2012] Off-axis axis estimate = 6.65'
[Fri May  4 10:41:36 2012] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Fri May  4 10:41:36 2012] Initial guess for spatial extent in simple fitting = 9.75"
[Fri May  4 10:41:36 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.831
[Fri May  4 10:41:36 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.75"
[Sat May  5 02:07:32 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src3.ximg exists
[Sat May  5 02:07:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src3.csv
[Sat May  5 02:07:32 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May  5 02:07:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src3.csv
[Sat May  5 02:07:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:07:35 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May  5 02:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May  5 02:07:35 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May  5 02:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat May  5 02:07:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:16:34 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.017196 pixels away
[Sat May  5 02:16:35 2012] Vigneting correction estimate = 1.000000
[Sat May  5 02:16:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 02:16:35 2012] Assessing source extent using major
[Sat May  5 02:16:35 2012] Source does appear to be extended
[Sat May  5 02:16:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 02:17:05 2012] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Sat May  5 02:17:05 2012] Initial guess for spatial extent in simple fitting = 9.75"
[Sat May  5 02:17:05 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.831
[Sat May  5 02:17:05 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.75"
[Sat May  5 15:53:52 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src3.ximg exists
[Sat May  5 15:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src3.csv
[Sat May  5 15:53:52 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat May  5 15:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src3.csv
[Sat May  5 15:53:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 15:53:54 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat May  5 15:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May  5 15:53:54 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat May  5 15:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat May  5 15:53:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 16:03:17 2012] Warning, spatial fit 3 centroid is now closest to src. 11
[Sat May  5 16:03:19 2012] Vigneting correction estimate = 1.000000
[Sat May  5 16:03:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 16:03:19 2012] Assessing source extent using major
[Sat May  5 16:03:19 2012] Source does appear to be extended
[Sat May  5 16:03:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 16:03:53 2012] Counts = 1980.380493, rescaling region sizes by 2.000000
[Sat May  5 16:03:53 2012] XMMSAS src. selection expression = ellipse(18530.540100, 28945.211121, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May  5 16:03:53 2012] Writing source region out to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src3_src.reg
[Sat May  5 16:03:53 2012] Extracting stamp from image fullrun_pn_xmm0506220101_pi300-10000_cl_sm2.00.img.gz, (139, 258) - (289, 408)
[Sat May  5 16:03:53 2012] XMMSAS bgd. selection expression = annulus(18530.540100, 28945.211121, 4350.000000, 8700.000000, X, Y) && !ellipse(28011.582000, 25716.846200, 1577.428845, 1577.428845, 0.000000, X, Y) && !ellipse(12590.044000, 31609.376000, 956.856028, 956.856028, 0.000000, X, Y) && !ellipse(26268.637600, 23345.606000, 1168.224034, 1168.224034, 0.000000, X, Y) && !ellipse(25310.656555, 21153.897552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13632.238000, 33470.338000, 1718.568049, 1718.568049, 0.000000, X, Y) && !ellipse(26278.757233, 33052.429932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20299.110870, 29955.173645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14854.624161, 22592.076477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15694.891969, 19301.173116, 1591.560046, 399.496856, 332.836670, X, Y) && !ellipse(22636.677600, 33694.225000, 1591.560046, 653.600819, 324.620400, X, Y) && !ellipse(20619.940000, 31907.038000, 1549.432045, 1549.432045, 0.000000, X, Y) && !ellipse(16588.210938, 29198.171692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23522.348297, 25520.117126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25730.005000, 24528.367800, 1118.024032, 299.248809, 151.629000, X, Y) && !ellipse(17839.735831, 20436.959824, 1760.872051, 352.919808, 333.878143, X, Y) && !ellipse(16697.680200, 19849.000400, 1760.872051, 407.964812, 331.530000, X, Y) && !ellipse(16762.664000, 19955.300000, 1794.472052, 1794.472052, 0.000000, X, Y) && !ellipse(25748.452301, 33825.022217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24928.207550, 34062.432281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16452.869400, 39581.050000, 2112.136061, 2112.136061, 0.000000, X, Y) && !ellipse(22187.046000, 35674.928200, 390.219211, 390.219211, 0.000000, X, Y) && !ellipse(11586.132000, 34754.406000, 2090.128060, 1718.440049, 336.572000, X, Y) && !ellipse(12273.544067, 34128.295593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14636.748474, 34098.089325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.990845, 34047.983612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23381.846802, 33805.884766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.989380, 33424.306610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23516.338000, 32693.000000, 1531.960044, 1531.960044, 0.000000, X, Y) && !ellipse(22197.326000, 32998.337680, 1267.560036, 1267.560036, 0.000000, X, Y) && !ellipse(22281.177856, 32409.533173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.180000, 33186.918478, 1579.528045, 754.927222, 323.669000, X, Y) && !ellipse(20554.631200, 31863.254000, 544.680816, 544.680816, 0.000000, X, Y) && !ellipse(11107.318466, 32156.328339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.480000, 31876.602000, 924.288027, 924.288027, 0.000000, X, Y) && !ellipse(21088.083359, 31142.622223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11252.857880, 31203.589661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26458.285004, 30952.896484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.706200, 30890.821400, 495.324014, 495.324014, 0.000000, X, Y) && !ellipse(12144.133957, 30852.239014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23347.663300, 30612.773956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27844.568000, 30894.656000, 1414.600041, 885.960025, 82.830000, X, Y) && !ellipse(20479.204163, 31262.204742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21996.781738, 30214.644348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26926.539246, 30595.558746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10371.280624, 30397.777649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24753.776200, 29963.127000, 644.634419, 644.634419, 0.000000, X, Y) && !ellipse(24149.326000, 30108.660000, 1323.712038, 1323.712038, 0.000000, X, Y) && !ellipse(10223.962000, 29555.276000, 2074.048060, 2074.048060, 0.000000, X, Y) && !ellipse(17416.069800, 29835.734400, 364.011210, 364.011210, 0.000000, X, Y) && !ellipse(20921.752411, 30134.799652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27176.159790, 29567.597778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10552.214233, 29061.902313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10013.036194, 29186.946228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26598.645782, 28753.642792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22744.132660, 26729.305084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15894.700027, 26906.289337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21963.170395, 26379.082825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23601.361969, 26431.132019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22486.435516, 26153.243378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21501.541779, 26228.800201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23036.578827, 26122.097229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.232000, 26076.974800, 1062.880031, 1062.880031, 0.000000, X, Y) && !ellipse(24661.708984, 25704.187653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.404816, 25772.453766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19292.163132, 25238.681366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18842.223282, 24743.685669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19966.989273, 24519.120636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19262.880814, 24594.749146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18843.884003, 24229.087891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.902832, 24135.118439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24853.035706, 24060.766998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24397.716000, 23877.284000, 676.238419, 676.238419, 0.000000, X, Y) && !ellipse(18165.951477, 23706.875488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16925.758087, 23680.357056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20525.761000, 23425.120420, 1422.392041, 359.844010, 30.492000, X, Y) && !ellipse(25004.016602, 23199.430359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17372.249054, 23284.396606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22647.420563, 22914.800598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18884.549759, 22831.894653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19721.928741, 22827.705017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18526.404892, 22549.136688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24154.760345, 22611.025421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22196.260000, 22692.690000, 1324.352038, 1324.352038, 0.000000, X, Y) && !ellipse(27573.044189, 22418.182678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21266.136261, 22230.750885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19539.005188, 22049.444244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18974.191513, 22229.487091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25447.225952, 22136.884979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26646.683228, 22228.369324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20739.476685, 21948.703140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18297.849350, 22053.001984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.209167, 21721.026413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17540.129211, 22230.527863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20115.739944, 21610.634277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19634.550400, 21357.454666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25781.905670, 21617.221405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19086.089050, 21085.241150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27525.205872, 21152.339050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17654.879578, 21177.668030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26743.947571, 20794.271179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23424.810486, 20988.410904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18263.369812, 20644.266006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27324.764435, 20570.600891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15223.574997, 20478.727585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.732178, 26402.558594, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sat May  5 16:03:53 2012] Writing fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src3.gif
[Sat May  5 16:22:29 2012] Mean detx,y = (-7096.87, 6626.72) 
[Sat May  5 16:22:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 16:28:44 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 16:28:45 2012] Setting source spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat May  5 16:28:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May  6 03:17:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  6 03:17:19 2012] rmf not generated due to insufficient counts
[Sun May  6 11:35:39 2012] Updating aperture counts using extracted products
[Sun May  6 11:35:39 2012] Error reading totcts from fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May  6 11:35:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 11:35:51 2012] Using photon index=1.80, rate=0.0181, arf fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src3.arf
[Sun May  6 11:35:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 11:35:51 2012] Updating source flux to 8e-14
[Sun May  6 11:36:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting