[Fri May  4 10:28:38 2012] Detection parameters:
  Position = (302.6, 380.5) = 5 35 44.13 -69 9 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 931.3 +/- 46.3
  Background counts = 276.9
  Rate = 0.009 +/- 0.0004

[Fri May  4 10:29:05 2012] Off-axis axis estimate = 5.96'
[Fri May  4 10:41:36 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Fri May  4 10:41:36 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Fri May  4 10:41:36 2012] source mask rpix=2.2, npix_max = 28, mask sum = 23, frac = 0.811
[Fri May  4 10:41:36 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.41"
[Sat May  5 02:07:33 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src10.ximg exists
[Sat May  5 02:07:33 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src10.csv
[Sat May  5 02:07:33 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat May  5 02:07:33 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src10.csv
[Sat May  5 02:07:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:07:35 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat May  5 02:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat May  5 02:07:35 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat May  5 02:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat May  5 02:07:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 02:16:34 2012] Warning, spatial fit 10 centroid is now closest to src. 25
[Sat May  5 02:16:35 2012] Vigneting correction estimate = 1.000000
[Sat May  5 02:16:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 02:16:35 2012] Assessing source extent using major
[Sat May  5 02:16:35 2012] Source does appear to be extended
[Sat May  5 02:16:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 02:17:05 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Sat May  5 02:17:05 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Sat May  5 02:17:05 2012] source mask rpix=2.2, npix_max = 28, mask sum = 23, frac = 0.811
[Sat May  5 02:17:05 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.41"
[Sat May  5 15:53:52 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src10.ximg exists
[Sat May  5 15:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src10.csv
[Sat May  5 15:53:52 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat May  5 15:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src10.csv
[Sat May  5 15:53:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 15:53:54 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat May  5 15:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat May  5 15:53:54 2012] fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat May  5 15:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat May  5 15:53:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506220101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 16:03:17 2012] Warning, spatial fit 10 centroid is now closest to src. 25
[Sat May  5 16:03:17 2012] Spatial fit model total counts = 6001.910000, observed total counts = 3659.000000
[Sat May  5 16:03:17 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  5 16:03:19 2012] Vigneting correction estimate = 1.000000
[Sat May  5 16:03:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  5 16:03:19 2012] Assessing source extent using major
[Sat May  5 16:03:19 2012] Source does appear to be extended
[Sat May  5 16:03:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  5 16:03:54 2012] XMMSAS src. selection expression = ellipse(26278.757233, 33052.429932, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  5 16:03:54 2012] Writing source region out to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src10_src.reg
[Sat May  5 16:03:54 2012] Extracting stamp from image fullrun_pn_xmm0506220101_pi300-10000_cl_sm2.00.img.gz, (265, 343) - (340, 418)
[Sat May  5 16:03:54 2012] XMMSAS bgd. selection expression = annulus(26278.757233, 33052.429932, 1087.500000, 2175.000000, X, Y) && !ellipse(22636.677600, 33694.225000, 1591.560046, 653.600819, 324.620400, X, Y) && !ellipse(25748.452301, 33825.022217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24928.207550, 34062.432281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.990845, 34047.983612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23381.846802, 33805.884766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.989380, 33424.306610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23516.338000, 32693.000000, 1531.960044, 1531.960044, 0.000000, X, Y) && !ellipse(28500.830902, 31859.373932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.480000, 31876.602000, 924.288027, 924.288027, 0.000000, X, Y) && !ellipse(26458.285004, 30952.896484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.706200, 30890.821400, 495.324014, 495.324014, 0.000000, X, Y) && !ellipse(23347.663300, 30612.773956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27844.568000, 30894.656000, 1414.600041, 885.960025, 82.830000, X, Y) && !ellipse(26926.539246, 30595.558746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.326000, 30108.660000, 1323.712038, 1323.712038, 0.000000, X, Y)
[Sat May  5 16:03:54 2012] Writing fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src10.gif
[Sat May  5 17:12:45 2012] Mean detx,y = (-7099.12, -2149.52) 
[Sat May  5 17:12:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May  5 17:14:08 2012] Binned source spectrum to 10 counts/bin
[Sat May  5 17:14:09 2012] Setting source spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat May  5 17:14:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun May  6 05:46:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  6 05:46:24 2012] rmf not generated due to insufficient counts
[Sun May  6 11:35:40 2012] Updating aperture counts using extracted products
[Sun May  6 11:35:40 2012] Error reading totcts from fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May  6 11:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 11:35:52 2012] Using photon index=1.80, rate=0.00851, arf fullrun_pn_xmm0506220101_pi300-10000_pass1_cl_src10.arf
[Sun May  6 11:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 11:35:52 2012] Updating source flux to 4.6e-14
[Sun May  6 11:36:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting