[Tue Dec 20 07:30:08 2011] Detection parameters:
  Position = (261.4, 288.8) = 18 22 12.71 64 21 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.7 +/- 42.6
  Background counts = 857.7
  Rate = 0.05 +/- 0.01

[Tue Dec 20 07:30:09 2011] Off-axis axis estimate = 2.77'
[Tue Dec 20 07:35:10 2011] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 07:35:10 2011] Initial guess for spatial extent in simple fitting = 7.82"
[Tue Dec 20 07:35:10 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948
[Tue Dec 20 07:35:10 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 7.82"
[Tue Dec 20 08:36:29 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_src10.ximg exists
[Tue Dec 20 08:36:30 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Dec 20 08:36:30 2011] Fit fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_src10 appears to have run properly
[Tue Dec 20 08:36:30 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Dec 20 08:36:30 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Dec 20 08:36:30 2011] Fit fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Dec 20 08:45:28 2011] Spatial fit model total counts = 9517.750000, observed total counts = 7852.000000
[Tue Dec 20 08:45:28 2011] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Dec 20 08:45:28 2011] Spatial fit model total counts = 9688.630000, observed total counts = 9712.000000
[Tue Dec 20 08:45:28 2011] Offset between fit and detection position for source 10 = 5.948626 pixels
[Tue Dec 20 08:45:28 2011] 8866.960000 total counts/ 6540.030000 bgd. counts: snr = 28.773550
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 5.948626 pixels
  Position = (264.8, 284.0) = 18 22 10.42 64 20 42.9
  Extent = 15.6 (15.6-31.3)", rotation angle = 0
  Source counts = 2326.9 +/- 94.2
  Background counts = 6540.0
  Rate = 0.4 +/- 0.02
[Tue Dec 20 08:45:28 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 08:45:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 08:45:28 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 08:45:28 2011] Source does appear to be extended
[Tue Dec 20 08:45:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 08:45:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 08:45:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 08:45:38 2011] Initial guess for spatial extent in simple fitting = 15.63"
[Tue Dec 20 08:45:38 2011] source mask rpix=3.6, npix_max = 67, mask sum = 56, frac = 0.835
[Tue Dec 20 08:45:38 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 15.63"
[Tue Dec 20 10:54:44 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_src10.ximg exists
[Tue Dec 20 10:54:44 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Dec 20 10:54:44 2011] Fit fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_src10 appears to have run properly
[Tue Dec 20 10:54:45 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Dec 20 10:54:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Dec 20 10:54:45 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Dec 20 10:54:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Dec 20 10:54:45 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 11:04:44 2011] Warning, spatial fit 10 centroid is now closest to src. 8
[Tue Dec 20 11:04:44 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 11:04:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 11:04:44 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 11:04:44 2011] Source does appear to be extended
[Tue Dec 20 11:04:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 11:04:54 2011] Counts = 2326.930000, rescaling region sizes by 2.000000
[Tue Dec 20 11:04:54 2011] XMMSAS src. selection expression = ellipse(22988.792000, 24656.576000, 1875.840054, 1875.840054, 0.000000, X, Y)
[Tue Dec 20 11:04:54 2011] Writing source region out to fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src10_src.reg
[Tue Dec 20 11:04:54 2011] Extracting stamp from image fullrun_pn_xmm0506212301_pi300-10000_cl_sm2.00.img.gz, (157, 176) - (373, 392)
[Tue Dec 20 11:04:54 2011] XMMSAS bgd. selection expression = annulus(22988.792000, 24656.576000, 6252.800180, 12505.600360, X, Y) && !ellipse(26904.786000, 26540.934000, 2171.824062, 2171.824062, 0.000000, X, Y) && !ellipse(26301.609070, 26726.315521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.386000, 26114.702000, 2238.584064, 2238.584064, 0.000000, X, Y) && !ellipse(26047.082031, 26307.484650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25445.670000, 25358.670000, 909.312026, 909.312026, 0.000000, X, Y) && !ellipse(26042.969391, 25867.110870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26379.340200, 25187.434000, 1048.344030, 1048.344030, 0.000000, X, Y) && !ellipse(22338.197266, 25412.123810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22079.798000, 25186.424000, 1269.408037, 1269.408037, 0.000000, X, Y) && !ellipse(24735.581520, 24482.846000, 1363.840839, 1363.840839, 0.000000, X, Y)
[Tue Dec 20 11:04:54 2011] Writing fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src10.gif
[Tue Dec 20 11:41:52 2011] Mean detx,y = (453.43, -179.96) 
[Tue Dec 20 11:41:57 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 11:45:11 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 11:45:11 2011] Setting source spectrum file to fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Dec 20 11:45:11 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Dec 20 14:40:25 2011] Updating aperture counts using extracted products
[Tue Dec 20 14:40:25 2011] Error reading totcts from fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Dec 20 14:40:26 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 14:40:26 2011] Using photon index=1.80, rate=0.403, arf fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src10.arf
[Tue Dec 20 14:40:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 14:40:26 2011] Updating source flux to 9.6e-13
[Tue Dec 20 14:41:07 2011] Flag p found in src. 10 procflags, skipping spectral fitting