[Tue Dec 20 07:30:08 2011] Detection parameters:
  Position = (308.1, 310.8) = 18 21 41.42 64 22 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.0 +/- 40.3
  Background counts = 771.0
  Rate = 0.06 +/- 0.01

[Tue Dec 20 07:30:09 2011] Off-axis axis estimate = 1.14'
[Tue Dec 20 07:35:10 2011] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 07:35:10 2011] Initial guess for spatial extent in simple fitting = 7.00"
[Tue Dec 20 07:35:10 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Tue Dec 20 07:35:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.00"
[Tue Dec 20 08:36:29 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Dec 20 08:36:29 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Dec 20 08:36:29 2011] Fit fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Dec 20 08:36:30 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Dec 20 08:36:30 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Dec 20 08:36:30 2011] Fit fullrun_pn_xmm0506212301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Dec 20 08:45:28 2011] Spatial fit model total counts = 8461.750000, observed total counts = 8454.000000
[Tue Dec 20 08:45:28 2011] Offset between fit and detection position for source 1 = 2.664337 pixels
[Tue Dec 20 08:45:28 2011] 8436.836000 total counts/ 7472.900000 bgd. counts: snr = 11.150738
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.664337 pixels
  Position = (308.2, 308.1) = 18 21 41.32 64 22 28.1
  Extent = 14.0 (13.9-28.0)", rotation angle = 0
  Source counts = 963.9 +/- 91.9
  Background counts = 7472.9
  Rate = 0.2 +/- 0.02
[Tue Dec 20 08:45:28 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 08:45:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 08:45:28 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 08:45:28 2011] Source does appear to be extended
[Tue Dec 20 08:45:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 08:45:28 2011] Source is confused with source 2
[Tue Dec 20 08:45:28 2011] Source is confused with source 3
[Tue Dec 20 08:45:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 20 08:45:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 20 08:45:38 2011] Initial guess for spatial extent in simple fitting = 13.99"
[Tue Dec 20 08:45:38 2011] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.014
[Tue Dec 20 08:45:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.99"
[Tue Dec 20 10:54:44 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Dec 20 10:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_src1.csv
[Tue Dec 20 10:54:44 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Dec 20 10:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_src1.csv
[Tue Dec 20 10:54:44 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 10:54:44 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Dec 20 10:54:44 2011] fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Dec 20 10:54:44 2011] Fit fullrun_pn_xmm0506212301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Dec 20 11:04:44 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Tue Dec 20 11:04:44 2011] Source 1 is offset by 0.472584 and -3.885517 pixels which is larger than
2 X fitted extent = 1.119743 x 1.119743, not incorporating fit results
[Tue Dec 20 11:04:44 2011] Spatial fit model total counts = 11015.900000, observed total counts = 11325.000000
[Tue Dec 20 11:04:44 2011] Offset between fit and detection position for source 1 = 2.945913 pixels
[Tue Dec 20 11:04:44 2011] Warning, changing simple spatial fit ID from 1 to 3
[Tue Dec 20 11:04:44 2011] 9105.040000 total counts/ 1375.740000 bgd. counts: snr = 208.387652
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.945913 pixels
  Position = (309.8, 305.6) = 18 21 40.27 64 22 17.3
  Extent = 27.1 (27.1-27.2)", rotation angle = 0
  Source counts = 7729.3 +/- 95.4
  Background counts = 1375.7
  Rate = 1 +/- 0.02
[Tue Dec 20 11:04:44 2011] Source 1 is offset by 0.589517 and 2.618460 pixels which is larger than
2 X fitted extent = 1.847729 x 1.847729, not incorporating fit results
[Tue Dec 20 11:04:44 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 11:04:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 11:04:44 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 11:04:44 2011] Source does appear to be extended
[Tue Dec 20 11:04:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 11:04:54 2011] Counts = 7729.300000, rescaling region sizes by 2.000000
[Tue Dec 20 11:04:54 2011] XMMSAS src. selection expression = ellipse(26904.786000, 26540.934000, 3257.736094, 3257.736094, 0.000000, X, Y)
[Tue Dec 20 11:04:54 2011] Writing source region out to fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src1_src.reg
[Tue Dec 20 11:04:54 2011] Extracting stamp from image fullrun_pn_xmm0506212301_pi300-10000_cl_sm2.00.img.gz, (123, 118) - (497, 493)
[Tue Dec 20 11:04:54 2011] XMMSAS bgd. selection expression = annulus(26904.786000, 26540.934000, 10859.120312, 21718.240625, X, Y) && !ellipse(26301.609070, 26726.315521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.386000, 26114.702000, 2238.584064, 2238.584064, 0.000000, X, Y) && !ellipse(26047.082031, 26307.484650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25445.670000, 25358.670000, 909.312026, 909.312026, 0.000000, X, Y) && !ellipse(26042.969391, 25867.110870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26379.340200, 25187.434000, 1048.344030, 1048.344030, 0.000000, X, Y) && !ellipse(22338.197266, 25412.123810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22079.798000, 25186.424000, 1269.408037, 1269.408037, 0.000000, X, Y) && !ellipse(22988.792000, 24656.576000, 1250.560036, 1250.560036, 0.000000, X, Y) && !ellipse(24735.581520, 24482.846000, 1363.840839, 1363.840839, 0.000000, X, Y)
[Tue Dec 20 11:04:54 2011] Writing fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src1.gif
[Tue Dec 20 11:05:49 2011] Mean detx,y = (-488.08, 1061.29) 
[Tue Dec 20 11:05:54 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 11:16:18 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 11:16:19 2011] Setting source spectrum file to fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 20 11:16:19 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Dec 20 14:40:24 2011] Updating aperture counts using extracted products
[Tue Dec 20 14:40:24 2011] Error reading totcts from fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 20 14:40:25 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 14:40:25 2011] Using photon index=1.80, rate=1.34, arf fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src1.arf
[Tue Dec 20 14:40:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 14:40:25 2011] Updating source flux to 4.6e-12
[Tue Dec 20 14:41:07 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Tue Dec 20 14:41:07 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Dec 20 14:44:16 2011] Reading fit data from xmm0506212301/analysis//spectral/fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Dec 20 14:44:16 2011] Spectral fit parameter nH value = 2.86064e+12
[Tue Dec 20 14:44:16 2011] Spectral fit parameter PhoIndex value = 0.692531
[Tue Dec 20 14:44:16 2011] Failed to get F(0.3-8.0) from xmm0506212301/analysis//spectral/fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Dec 20 14:44:16 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 14:44:16 2011] Using Nh = 2.9e+12, photon index=0.69, rate=1.34, arf fullrun_pn_xmm0506212301_pi300-10000_pass1_cl_src1.arf
[Tue Dec 20 14:44:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 14:44:16 2011] Updating source flux to 1e-11