Source List

Observation details report
Detailed source parameters (including errors) in a comma-separated values file

Click on source number for detailed analysis, including spectral fits if applicable

data idnum idradec telescope instrument x y cnts cntserr rate rateerr SNR poisprob sigmaj sigmin incang offax cnts_soft cnts_hard hr hr_err ext var N_H flux vign flags
Report srcpi bgdpi arf rmf 1 X182156.86+642035.1 xmm pn 272.028 291.071 2752.5 64.3125 5.44016 0.12711 73.9984 1 5.98649 5.98649 0 1.98996 F T 7.41747 1.09205e-11 1 dsxf
Report srcpi bgdpi arf rmf 1 X182156.79+642035.8 xmm mos1 272.134 291.23 1042.98 40.4042 1.78106 0.0689969 42.9564 1 5.51437 4.90924 346.288 1.97554 F T 7.41772 1.70956e-11 1 dsxf
Report srcpi bgdpi arf 2 X182156.46+642035.7 xmm mos2 272.612 289.96 708.286 34.7332 1.81361 0.0889365 0 10.875 10.875 0 1.97059 F T 7.41821 2.15081e-11 1 dcx
Report srcpi bgdpi arf 1 X182157.24+642045.4 xmm mos2 271.457 294.124 120.065 19.4878 0.338248 0.0549013 0 10.875 10.875 0 1.98084 F T 7.41711 4.56691e-12 1 dcx

counts and rate are bgd.-subtracted, based on simple spatial fitting (if done) or extracted counts from aperture otherwise (N.B., in either case aperture counts are given csv file).
cntserr, rateerr = Error on (source) counts and count rate, based on error in total counts
SNR = signal-to-noise ratio, computed using Nsrc/sqrt(Nbgd)
poisprob = Poisson probability of observing total counts given bgd. counts
sigmaj, sigmin = source extent (from detection output or spatial fitting) in units of arcsecs.
incang = position angle of source (inclination from x-axis)
cnts_soft = bgd.-subtracted counts in soft band (0.50 - 2.00 KeV, always taken directly from source aperture rather than model fitting)
cnts_hard = bgd.-subtracted counts in hard band (2.00 - 10.00 KeV, always taken directly from source aperture rather than model fitting)
hr, hr_err = hardness ratio ([cnts_hard-cnts_soft]/[cnts_hard+cnts_soft]) and error
ext = source extension flag: F = false (not extended), A = true (extended), A = asymetric (ratio of sigmaj/sigmin > 1 + x, where x = 0.5 by default)
var = variability flag: U = unknown, F = false (is not variable), T = true
N_H = Galactic column density as determined from LHEASOFT nh program
flux = flux determined from count rate using pimms (in the 0.30-8.00 keV bandpass for a power-law model with ph. index = 1.8)
vign = vignetting correction
Flags: d = detection parameters, s = simple spatial fitting parameters, b = simple spatial fitting failed, p = poor simple spatial fit, x = extracted events parameters, t = temporal anaylsis parameters, i = psf spatial fitting parameters, f = spectral fitting parameters, c = source is confused, u = user-defined source, v = detected source coincident with user-defined source, r = source is in region-of-interest