[Thu Feb 23 18:31:11 2012] Detection parameters:
  Position = (156.8, 267.2) = 18 23 19.24 64 19 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 284.9 +/- 20.8
  Background counts = 9.1
  Rate = 0.07 +/- 0.005

[Thu Feb 23 18:31:12 2012] Off-axis axis estimate = 10.52'
[Thu Feb 23 19:01:52 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 19:01:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 19:01:52 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Thu Feb 23 19:01:52 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.886
[Thu Feb 23 19:01:52 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.69"
[Thu Feb 23 19:17:18 2012] fullrun_mos2_xmm0506211301_pi300-10000_cl_pass0_src2.ximg exists
[Thu Feb 23 19:17:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506211301_pi300-10000_cl_pass0_src2.csv
[Thu Feb 23 19:17:18 2012] fullrun_mos2_xmm0506211301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Feb 23 19:17:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506211301_pi300-10000_cl_pass0_src2.csv
[Thu Feb 23 19:17:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506211301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506211301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 19:17:18 2012] fullrun_mos2_xmm0506211301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Feb 23 19:17:18 2012] fullrun_mos2_xmm0506211301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Feb 23 19:17:18 2012] Fit fullrun_mos2_xmm0506211301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Feb 23 19:17:26 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.663993 pixels away
[Thu Feb 23 19:17:26 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 19:17:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 19:17:26 2012] Assessing source extent using major
[Thu Feb 23 19:17:26 2012] Source does appear to be extended
[Thu Feb 23 19:17:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 19:42:10 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 19:42:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 19:42:10 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Thu Feb 23 19:42:10 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.886
[Thu Feb 23 19:42:10 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.69"
[Thu Feb 23 19:53:14 2012] fullrun_mos2_xmm0506211301_pi300-10000_cl_pass1_src2.ximg exists
[Thu Feb 23 19:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506211301_pi300-10000_cl_pass1_src2.csv
[Thu Feb 23 19:53:14 2012] fullrun_mos2_xmm0506211301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Feb 23 19:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506211301_pi300-10000_cl_pass1_src2.csv
[Thu Feb 23 19:53:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506211301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506211301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 19:53:14 2012] fullrun_mos2_xmm0506211301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Feb 23 19:53:14 2012] fullrun_mos2_xmm0506211301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Feb 23 19:53:14 2012] Fit fullrun_mos2_xmm0506211301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Feb 23 19:53:19 2012] Spatial fit model total counts = 329.000000, observed total counts = 329.000000
[Thu Feb 23 19:53:19 2012] Offset between fit and detection position for source 1 = 0.176115 pixels
[Thu Feb 23 19:53:19 2012] 334.651000 total counts/ 150.023000 bgd. counts: snr = 15.073657
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.176115 pixels
  Position = (156.8, 267.3) = 18 23 19.24 64 19 32.4
  Extent = 5.5 (4.8-6.3)", rotation angle = 0
  Source counts = 184.6 +/- 18.3
  Background counts = 150.0
  Rate = 0.03 +/- 0.003
[Thu Feb 23 19:53:19 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 19:53:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 19:53:19 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 19:53:19 2012] Source does appear to be extended
[Thu Feb 23 19:53:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 22:36:37 2012] XMMSAS src. selection expression = ellipse(13593.996800, 23209.725200, 327.085209, 327.085209, 0.000000, X, Y)
[Thu Feb 23 22:36:37 2012] Writing source region out to fullrun_mos2_xmm0506211301_pi300-10000_pass1_cl_src1_src.reg
[Thu Feb 23 22:36:37 2012] Extracting stamp from image fullrun_mos2_xmm0506211301_pi300-10000_cl_sm2.00.img.gz, (138, 249) - (176, 286)
[Thu Feb 23 22:36:37 2012] XMMSAS bgd. selection expression = annulus(13593.996800, 23209.725200, 545.142016, 1090.284031, X, Y)
[Thu Feb 23 22:36:37 2012] Writing fullrun_mos2_xmm0506211301_pi300-10000_pass1_cl_src1.gif
[Thu Feb 23 22:41:19 2012] Mean detx,y = (-10329.65, 3507.93) 
[Thu Feb 23 22:41:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 22:41:33 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 22:41:33 2012] Setting source spectrum file to fullrun_mos2_xmm0506211301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 23 22:41:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506211301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Feb 23 23:15:37 2012] Updating aperture counts using extracted products
[Thu Feb 23 23:15:37 2012] Error reading totcts from fullrun_mos2_xmm0506211301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 23 23:15:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 23:15:37 2012] Using photon index=1.80, rate=0.0259, arf fullrun_mos2_xmm0506211301_pi300-10000_pass1_cl_src1.arf
[Thu Feb 23 23:15:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 23:15:37 2012] Updating source flux to 6.1e-13