[Thu Nov 24 22:24:48 2011] Detection parameters:
  Position = (287.5, 300.0) = 18 21 59.74 64 22 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.0 +/- 41.5
  Background counts = 888.7
  Rate = 0.04 +/- 0.01

[Thu Nov 24 22:24:48 2011] Off-axis axis estimate = 0.80'
[Thu Nov 24 22:29:35 2011] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 22:29:35 2011] Initial guess for spatial extent in simple fitting = 6.83"
[Thu Nov 24 22:29:35 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.167
[Thu Nov 24 22:29:35 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 6.83"
[Fri Nov 25 01:32:33 2011] fullrun_pn_xmm0506210901_pi300-10000_cl_pass0_src5.ximg exists
[Fri Nov 25 01:32:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210901_pi300-10000_cl_pass0_src5.csv
[Fri Nov 25 01:32:33 2011] fullrun_pn_xmm0506210901_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Nov 25 01:32:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210901_pi300-10000_cl_pass0_src5.csv
[Fri Nov 25 01:32:33 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506210901_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506210901_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 01:32:33 2011] fullrun_pn_xmm0506210901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Nov 25 01:32:33 2011] fullrun_pn_xmm0506210901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Nov 25 01:32:33 2011] Fit fullrun_pn_xmm0506210901_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Nov 25 02:08:31 2011] Source 5 is offset by 5.060345 and -7.172659 pixels which is larger than
2 X fitted extent = 1.596009 x 1.596009, not incorporating fit results
[Fri Nov 25 02:08:31 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 02:08:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 02:08:31 2011] Assessing source extent using major
[Fri Nov 25 02:08:31 2011] Source does appear to be extended
[Fri Nov 25 02:08:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 02:08:46 2011] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 02:08:46 2011] Initial guess for spatial extent in simple fitting = 6.83"
[Fri Nov 25 02:08:46 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.167
[Fri Nov 25 02:08:46 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 6.83"
[Fri Nov 25 03:58:39 2011] fullrun_pn_xmm0506210901_pi300-10000_cl_pass1_src5.ximg exists
[Fri Nov 25 03:58:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210901_pi300-10000_cl_pass1_src5.csv
[Fri Nov 25 03:58:39 2011] fullrun_pn_xmm0506210901_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Nov 25 03:58:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210901_pi300-10000_cl_pass1_src5.csv
[Fri Nov 25 03:58:39 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506210901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506210901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 03:58:39 2011] fullrun_pn_xmm0506210901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Nov 25 03:58:39 2011] fullrun_pn_xmm0506210901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Nov 25 03:58:39 2011] Fit fullrun_pn_xmm0506210901_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Nov 25 04:22:08 2011] Source 5 is offset by 5.020276 and -7.161901 pixels which is larger than
2 X fitted extent = 1.518271 x 1.518271, not incorporating fit results
[Fri Nov 25 04:22:08 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 04:22:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 04:22:08 2011] Assessing source extent using major
[Fri Nov 25 04:22:08 2011] Source does appear to be extended
[Fri Nov 25 04:22:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 04:22:08 2011] Source is confused with source 2
[Fri Nov 25 04:22:19 2011] XMMSAS src. selection expression = ellipse(24968.094055, 26055.004639, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Nov 25 04:22:19 2011] Writing source region out to fullrun_pn_xmm0506210901_pi300-10000_pass1_cl_src5_src.reg
[Fri Nov 25 04:22:19 2011] Extracting stamp from image fullrun_pn_xmm0506210901_pi300-10000_cl_sm2.00.img.gz, (250, 263) - (325, 338)
[Fri Nov 25 04:22:19 2011] XMMSAS bgd. selection expression = annulus(24968.094055, 26055.004639, 1087.500000, 2175.000000, X, Y) && !ellipse(25324.718400, 23950.933320, 1382.445640, 1382.445640, 0.000000, X, Y) && !ellipse(26575.689200, 25855.400000, 2254.632065, 2254.632065, 0.000000, X, Y) && !ellipse(24090.808655, 23127.035675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.139600, 25909.838200, 1084.024031, 459.760013, 75.371000, X, Y) && !ellipse(22667.608000, 23963.486800, 1256.864036, 1256.864036, 0.000000, X, Y) && !ellipse(23685.250275, 23716.255707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23649.528000, 22938.376000, 1250.736036, 1250.736036, 0.000000, X, Y)
[Fri Nov 25 04:22:19 2011] Writing fullrun_pn_xmm0506210901_pi300-10000_pass1_cl_src5.gif
[Fri Nov 25 04:43:15 2011] Mean detx,y = (-182.19, 1860.56) 
[Fri Nov 25 04:43:20 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 04:43:29 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 04:43:29 2011] Setting source spectrum file to fullrun_pn_xmm0506210901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Nov 25 04:43:29 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506210901_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Nov 25 05:17:15 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Nov 25 05:17:15 2011] rmf not generated due to insufficient counts
[Fri Nov 25 07:21:27 2011] Updating aperture counts using extracted products
[Fri Nov 25 07:21:27 2011] Error reading totcts from fullrun_pn_xmm0506210901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Nov 25 07:21:28 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 07:21:28 2011] Using photon index=1.80, rate=0.0445, arf fullrun_pn_xmm0506210901_pi300-10000_pass1_cl_src5.arf
[Fri Nov 25 07:21:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 07:21:28 2011] Updating source flux to 1.1e-13
[Fri Nov 25 07:22:49 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting