[Thu Nov 24 22:25:36 2011] Detection parameters:
  Position = (281.4, 278.9) = 18 22 3.83 64 20 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.5 +/- 19.9
  Background counts = 83.1
  Rate = 0.03 +/- 0.005

[Thu Nov 24 22:25:36 2011] Off-axis axis estimate = 1.88'
[Fri Nov 25 01:37:35 2011] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 01:37:35 2011] Initial guess for spatial extent in simple fitting = 7.37"
[Fri Nov 25 01:37:35 2011] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.623
[Fri Nov 25 01:37:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.37"
[Fri Nov 25 02:08:27 2011] fullrun_mos2_xmm0506210901_pi300-10000_cl_pass0_src3.ximg exists
[Fri Nov 25 02:08:27 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506210901_pi300-10000_cl_pass0_src3.csv
[Fri Nov 25 02:08:27 2011] fullrun_mos2_xmm0506210901_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Nov 25 02:08:27 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506210901_pi300-10000_cl_pass0_src3.csv
[Fri Nov 25 02:08:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 02:08:27 2011] fullrun_mos2_xmm0506210901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Nov 25 02:08:27 2011] fullrun_mos2_xmm0506210901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Nov 25 02:08:27 2011] Fit fullrun_mos2_xmm0506210901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Nov 25 02:08:34 2011] Source 4 is offset by -6.344827 and 2.199939 pixels which is larger than
2 X fitted extent = 2.788152 x 2.788152, not incorporating fit results
[Fri Nov 25 02:08:34 2011] Source 4 is offset by -7.544275 and 2.529433 pixels which is larger than
2 X fitted extent = 2.483632 x 3.501527, not incorporating fit results
[Fri Nov 25 02:08:34 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 02:08:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 02:08:34 2011] Assessing source extent using major
[Fri Nov 25 02:08:34 2011] Source does appear to be extended
[Fri Nov 25 02:08:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 04:02:45 2011] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 04:02:45 2011] Initial guess for spatial extent in simple fitting = 7.37"
[Fri Nov 25 04:02:45 2011] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.623
[Fri Nov 25 04:02:45 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.37"
[Fri Nov 25 04:22:04 2011] fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_src3.ximg exists
[Fri Nov 25 04:22:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 04:22:04 2011] fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Nov 25 04:22:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_src3.csv
[Fri Nov 25 04:22:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 04:22:05 2011] fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Nov 25 04:22:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Nov 25 04:22:05 2011] fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Nov 25 04:22:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Nov 25 04:22:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210901_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 04:22:12 2011] Spatial fit model total counts = 717.828000, observed total counts = 2309.000000
[Fri Nov 25 04:22:12 2011] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Nov 25 04:22:12 2011] Source 4 is offset by -7.544275 and 2.452514 pixels which is larger than
2 X fitted extent = 2.807968 x 2.807968, not incorporating fit results
[Fri Nov 25 04:22:12 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 04:22:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 04:22:12 2011] Assessing source extent using major
[Fri Nov 25 04:22:12 2011] Source does appear to be extended
[Fri Nov 25 04:22:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 07:09:07 2011] XMMSAS src. selection expression = ellipse(24435.904053, 24215.674683, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Nov 25 07:09:07 2011] Writing source region out to fullrun_mos2_xmm0506210901_pi300-10000_pass1_cl_src4_src.reg
[Fri Nov 25 07:09:07 2011] Extracting stamp from image fullrun_mos2_xmm0506210901_pi300-10000_cl_sm2.00.img.gz, (244, 241) - (319, 316)
[Fri Nov 25 07:09:07 2011] XMMSAS bgd. selection expression = annulus(24435.904053, 24215.674683, 1087.500000, 2175.000000, X, Y) && !ellipse(25321.413400, 23957.114000, 1336.929638, 1336.929638, 0.000000, X, Y) && !ellipse(24506.934052, 23525.632568, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Nov 25 07:09:07 2011] Writing fullrun_mos2_xmm0506210901_pi300-10000_pass1_cl_src4.gif
[Fri Nov 25 07:12:24 2011] Mean detx,y = (-450.26, -299.52) 
[Fri Nov 25 07:12:26 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 07:12:45 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 07:12:45 2011] Setting source spectrum file to fullrun_mos2_xmm0506210901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Nov 25 07:12:45 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506210901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Nov 25 07:17:53 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Nov 25 07:17:53 2011] rmf not generated due to insufficient counts
[Fri Nov 25 07:21:28 2011] Updating aperture counts using extracted products
[Fri Nov 25 07:21:29 2011] Error reading totcts from fullrun_mos2_xmm0506210901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Nov 25 07:21:29 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 07:21:29 2011] Using photon index=1.80, rate=0.0329, arf fullrun_mos2_xmm0506210901_pi300-10000_pass1_cl_src4.arf
[Fri Nov 25 07:21:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 07:21:29 2011] Updating source flux to 3.7e-13
[Fri Nov 25 07:22:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting