[Sun Mar 11 03:17:24 2012] Detection parameters:
  Position = (306.8, 292.8) = 18 21 52.71 64 21 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 412.5 +/- 50.0
  Background counts = 956.5
  Rate = 0.05 +/- 0.007

[Sun Mar 11 03:17:24 2012] Off-axis axis estimate = 0.73'
[Sun Mar 11 03:22:22 2012] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 03:22:22 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Sun Mar 11 03:22:22 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Sun Mar 11 03:22:22 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.79"
[Sun Mar 11 04:08:29 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_src3.ximg exists
[Sun Mar 11 04:08:29 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Mar 11 04:08:29 2012] Fit fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_src3 appears to have run properly
[Sun Mar 11 04:08:29 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Mar 11 04:08:29 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Mar 11 04:08:29 2012] Fit fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Mar 11 04:26:58 2012] Spatial fit model total counts = 12865.600000, observed total counts = 12567.000000
[Sun Mar 11 04:26:58 2012] Offset between fit and detection position for source 3 = 5.036819 pixels
[Sun Mar 11 04:26:58 2012] 12542.781000 total counts/ 12110.500000 bgd. counts: snr = 3.928123
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.036819 pixels
  Position = (307.9, 297.7) = 18 21 51.93 64 22 16.6
  Extent = 13.5 (13.2-13.6)", rotation angle = 0
  Source counts = 432.3 +/- 112.0
  Background counts = 12110.5
  Rate = 0.04 +/- 0.01
[Sun Mar 11 04:26:58 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 04:26:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 04:26:58 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 04:26:58 2012] Source does appear to be extended
[Sun Mar 11 04:26:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 04:27:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 04:27:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 11 04:27:09 2012] Initial guess for spatial extent in simple fitting = 13.46"
[Sun Mar 11 04:27:09 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.084
[Sun Mar 11 04:27:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.46"
[Sun Mar 11 05:19:17 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_src3.ximg exists
[Sun Mar 11 05:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_src3.csv
[Sun Mar 11 05:19:17 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Mar 11 05:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_src3.csv
[Sun Mar 11 05:19:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 05:19:17 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Mar 11 05:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Mar 11 05:19:17 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Mar 11 05:19:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Mar 11 05:19:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 05:39:36 2012] Source 3 is offset by 0.797108 and 4.391172 pixels which is larger than
2 X fitted extent = 3.405044 x 3.977402, not incorporating fit results
[Sun Mar 11 05:39:36 2012] Source 3 is offset by -4.784094 and -4.653034 pixels which is larger than
2 X fitted extent = 1.546906 x 1.546906, not incorporating fit results
[Sun Mar 11 05:39:36 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 05:39:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 05:39:36 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 05:39:36 2012] Source does appear to be extended
[Sun Mar 11 05:39:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 05:39:47 2012] XMMSAS src. selection expression = ellipse(26742.824600, 25853.272000, 807.486023, 807.486023, 0.000000, X, Y)
[Sun Mar 11 05:39:47 2012] Writing source region out to fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src3_src.reg
[Sun Mar 11 05:39:47 2012] Extracting stamp from image fullrun_pn_xmm0506210701_pi300-10000_cl_sm2.00.img.gz, (262, 251) - (354, 344)
[Sun Mar 11 05:39:47 2012] XMMSAS bgd. selection expression = annulus(26742.824600, 25853.272000, 1345.810039, 2691.620077, X, Y) && !ellipse(26072.547000, 23840.644000, 1488.658929, 1488.658929, 0.000000, X, Y) && !ellipse(25314.169159, 25619.136444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27383.525543, 25158.523376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.131897, 24729.048492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24385.694794, 24476.069336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24172.355225, 23800.231628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24384.263733, 22755.610352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23767.170000, 22446.436000, 1262.664036, 1262.664036, 0.000000, X, Y) && !ellipse(24803.142395, 22583.774200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23533.836609, 27290.222504, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 05:39:47 2012] Writing fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src3.gif
[Sun Mar 11 05:47:03 2012] Mean detx,y = (-1510.06, 900.35) 
[Sun Mar 11 05:47:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 05:47:23 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 05:47:24 2012] Setting source spectrum file to fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar 11 05:47:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Mar 11 07:56:09 2012] Updating aperture counts using extracted products
[Sun Mar 11 07:56:09 2012] Error reading totcts from fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Mar 11 07:56:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 07:56:10 2012] Using photon index=1.80, rate=0.0377, arf fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src3.arf
[Sun Mar 11 07:56:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 07:56:10 2012] Updating source flux to 1.1e-13
[Sun Mar 11 07:56:47 2012] Flag b found in src. 3 procflags, skipping spectral fitting