[Sun Mar 11 03:17:24 2012] Detection parameters:
  Position = (300.3, 274.8) = 18 21 57.04 64 20 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92485.9 +/- 357.3
  Background counts = 985.9
  Rate = 1e+01 +/- 0.05

[Sun Mar 11 03:17:24 2012] Off-axis axis estimate = 1.72'
[Sun Mar 11 03:22:22 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 03:22:22 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Mar 11 03:22:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sun Mar 11 03:22:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Mar 11 04:08:29 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 11 04:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 04:08:29 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 11 04:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 04:08:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 04:08:29 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 11 04:08:29 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 11 04:08:29 2012] Fit fullrun_pn_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 11 04:26:58 2012] Spatial fit model total counts = 93897.400000, observed total counts = 98708.000000
[Sun Mar 11 04:26:58 2012] Offset between fit and detection position for source 1 = 0.193162 pixels
[Sun Mar 11 04:26:58 2012] 93649.200000 total counts/ 25600.000000 bgd. counts: snr = 425.307500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.193162 pixels
  Position = (300.2, 274.6) = 18 21 57.10 64 20 36.0
  Extent = 6.2 (6.1-6.2)", rotation angle = 0
  Source counts = 68049.2 +/- 306.0
  Background counts = 25600.0
  Rate = 6 +/- 0.03
[Sun Mar 11 04:26:58 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 04:26:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 04:26:58 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 04:26:58 2012] Source does appear to be extended
[Sun Mar 11 04:26:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 04:27:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 04:27:09 2012] Initial guess for spatial extent in simple fitting = 6.17"
[Sun Mar 11 04:27:09 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.087
[Sun Mar 11 04:27:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.17"
[Sun Mar 11 05:19:17 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 05:19:17 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 05:19:17 2012] Fit fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Mar 11 05:19:17 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 05:19:17 2012] fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 05:19:17 2012] Fit fullrun_pn_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 05:39:36 2012] Spatial fit model total counts = 93994.500000, observed total counts = 98495.000000
[Sun Mar 11 05:39:36 2012] Offset between fit and detection position for source 1 = 0.010700 pixels
[Sun Mar 11 05:39:36 2012] 93962.100000 total counts/ 25600.000000 bgd. counts: snr = 427.263125
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010700 pixels
  Position = (300.2, 274.6) = 18 21 57.10 64 20 36.0
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 68362.1 +/- 306.5
  Background counts = 25600.0
  Rate = 6 +/- 0.03
[Sun Mar 11 05:39:36 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 05:39:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 05:39:36 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 05:39:36 2012] Source does appear to be extended
[Sun Mar 11 05:39:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 05:39:47 2012] Counts = 68362.100000, rescaling region sizes by 3.000000
[Sun Mar 11 05:39:47 2012] XMMSAS src. selection expression = ellipse(26072.547000, 23840.644000, 1116.494197, 1116.494197, 0.000000, X, Y)
[Sun Mar 11 05:39:47 2012] Writing source region out to fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 11 05:39:47 2012] Extracting stamp from image fullrun_pn_xmm0506210701_pi300-10000_cl_sm2.00.img.gz, (236, 210) - (364, 339)
[Sun Mar 11 05:39:47 2012] XMMSAS bgd. selection expression = annulus(26072.547000, 23840.644000, 5582.470984, 11164.941969, X, Y) && !ellipse(25314.169159, 25619.136444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26742.824600, 25853.272000, 1076.648031, 1076.648031, 0.000000, X, Y) && !ellipse(27383.525543, 25158.523376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.131897, 24729.048492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24385.694794, 24476.069336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24172.355225, 23800.231628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24384.263733, 22755.610352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23767.170000, 22446.436000, 1262.664036, 1262.664036, 0.000000, X, Y) && !ellipse(24803.142395, 22583.774200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23533.836609, 27290.222504, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 05:39:47 2012] Writing fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src1.gif
[Sun Mar 11 05:40:51 2012] Mean detx,y = (72.46, -236.89) 
[Sun Mar 11 05:40:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 05:43:00 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 05:43:01 2012] Setting source spectrum file to fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 05:43:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 11 07:56:09 2012] Updating aperture counts using extracted products
[Sun Mar 11 07:56:09 2012] Error reading totcts from fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 07:56:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 07:56:09 2012] Using photon index=1.80, rate=5.96, arf fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 07:56:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 07:56:10 2012] Updating source flux to 1.3e-11
[Sun Mar 11 07:57:32 2012] Reading fit data from xmm0506210701/analysis//spectral/fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 11 07:57:32 2012] Spectral fit parameter nH value = 605596000000.0
[Sun Mar 11 07:57:32 2012] Spectral fit parameter PhoIndex value = 1.65138
[Sun Mar 11 07:57:32 2012] Failed to get F(0.3-8.0) from xmm0506210701/analysis//spectral/fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 11 07:57:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 07:57:32 2012] Using Nh = 6.1e+11, photon index=1.65, rate=5.96, arf fullrun_pn_xmm0506210701_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 07:57:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 07:57:32 2012] Updating source flux to 1.5e-11