[Sun Mar 11 03:18:00 2012] Detection parameters:
  Position = (300.1, 274.8) = 18 21 57.18 64 20 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33095.1 +/- 215.1
  Background counts = 104.7
  Rate = 3 +/- 0.02

[Sun Mar 11 03:18:00 2012] Off-axis axis estimate = 1.72'
[Sun Mar 11 04:14:12 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 04:14:12 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Mar 11 04:14:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sun Mar 11 04:14:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Mar 11 04:26:51 2012] fullrun_mos2_xmm0506210701_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 11 04:26:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210701_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 04:26:51 2012] fullrun_mos2_xmm0506210701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 11 04:26:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210701_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 04:26:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 04:26:51 2012] fullrun_mos2_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 11 04:26:51 2012] fullrun_mos2_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 11 04:26:51 2012] Fit fullrun_mos2_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 11 04:27:01 2012] Spatial fit model total counts = 28279.700000, observed total counts = 27514.000000
[Sun Mar 11 04:27:01 2012] Offset between fit and detection position for source 5 = 0.149208 pixels
[Sun Mar 11 04:27:01 2012] 28173.050000 total counts/ 9117.750000 bgd. counts: snr = 199.559290
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.149208 pixels
  Position = (300.1, 274.7) = 18 21 57.16 64 20 36.3
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 19055.3 +/- 167.8
  Background counts = 9117.8
  Rate = 2 +/- 0.02
[Sun Mar 11 04:27:01 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 04:27:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 04:27:01 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 04:27:01 2012] Source does appear to be extended
[Sun Mar 11 04:27:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 05:23:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 05:23:56 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Sun Mar 11 05:23:56 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.996
[Sun Mar 11 05:23:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.37"
[Sun Mar 11 05:39:33 2012] fullrun_mos2_xmm0506210701_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 05:39:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210701_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 05:39:33 2012] fullrun_mos2_xmm0506210701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 05:39:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210701_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 05:39:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 05:39:33 2012] fullrun_mos2_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 05:39:33 2012] fullrun_mos2_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 05:39:33 2012] Fit fullrun_mos2_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 05:39:40 2012] Spatial fit model total counts = 28233.300000, observed total counts = 27460.000000
[Sun Mar 11 05:39:40 2012] Offset between fit and detection position for source 5 = 0.013215 pixels
[Sun Mar 11 05:39:40 2012] 28280.400000 total counts/ 9099.000000 bgd. counts: snr = 201.086757
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.013215 pixels
  Position = (300.1, 274.6) = 18 21 57.16 64 20 36.2
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 19181.4 +/- 168.2
  Background counts = 9099.0
  Rate = 2 +/- 0.02
[Sun Mar 11 05:39:40 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 05:39:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 05:39:40 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 05:39:40 2012] Source does appear to be extended
[Sun Mar 11 05:39:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 07:36:11 2012] Counts = 19181.400000, rescaling region sizes by 3.000000
[Sun Mar 11 07:36:11 2012] XMMSAS src. selection expression = ellipse(26064.252160, 23846.019800, 973.724428, 973.724428, 0.000000, X, Y)
[Sun Mar 11 07:36:11 2012] Writing source region out to fullrun_mos2_xmm0506210701_pi300-10000_pass1_cl_src5_src.reg
[Sun Mar 11 07:36:11 2012] Extracting stamp from image fullrun_mos2_xmm0506210701_pi300-10000_cl_sm2.00.img.gz, (244, 219) - (356, 331)
[Sun Mar 11 07:36:11 2012] XMMSAS bgd. selection expression = annulus(26064.252160, 23846.019800, 4868.622140, 9737.244280, X, Y) && !ellipse(25171.933929, 23453.782166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.997345, 22885.481110, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 07:36:11 2012] Writing fullrun_mos2_xmm0506210701_pi300-10000_pass1_cl_src5.gif
[Sun Mar 11 07:36:27 2012] Mean detx,y = (89.46, 113.28) 
[Sun Mar 11 07:36:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 07:40:21 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 07:40:22 2012] Setting source spectrum file to fullrun_mos2_xmm0506210701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 11 07:40:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506210701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Mar 11 07:56:10 2012] Updating aperture counts using extracted products
[Sun Mar 11 07:56:10 2012] Error reading totcts from fullrun_mos2_xmm0506210701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Mar 11 07:56:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 07:56:10 2012] Using photon index=1.80, rate=1.94, arf fullrun_mos2_xmm0506210701_pi300-10000_pass1_cl_src5.arf
[Sun Mar 11 07:56:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 07:56:10 2012] Updating source flux to 2e-11
[Sun Mar 11 07:56:47 2012] Reading fit data from xmm0506210701/analysis//spectral/fullrun_mos2_xmm0506210701_pi300-10000_pass1_cl_src5_pl.csv
[Sun Mar 11 07:56:47 2012] Spectral fit parameter nH value = 9.7819e+19
[Sun Mar 11 07:56:47 2012] Spectral fit parameter PhoIndex value = 1.98466
[Sun Mar 11 07:56:47 2012] Failed to get F(0.3-8.0) from xmm0506210701/analysis//spectral/fullrun_mos2_xmm0506210701_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sun Mar 11 07:56:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 07:56:47 2012] Using Nh = 9.8e+19, photon index=1.98, rate=1.94, arf fullrun_mos2_xmm0506210701_pi300-10000_pass1_cl_src5.arf
[Sun Mar 11 07:56:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 07:56:47 2012] Updating source flux to 1.9e-11