[Sun Mar 11 03:17:43 2012] Detection parameters:
  Position = (300.1, 274.9) = 18 21 57.21 64 20 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28709.8 +/- 203.9
  Background counts = 140.5
  Rate = 3 +/- 0.02

[Sun Mar 11 03:17:43 2012] Off-axis axis estimate = 1.71'
[Sun Mar 11 04:08:29 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 04:08:29 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Mar 11 04:08:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sun Mar 11 04:08:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Mar 11 04:14:12 2012] fullrun_mos1_xmm0506210701_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 11 04:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506210701_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 04:14:12 2012] fullrun_mos1_xmm0506210701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 11 04:14:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506210701_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 04:14:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506210701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506210701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 04:14:12 2012] fullrun_mos1_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 11 04:14:12 2012] fullrun_mos1_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 11 04:14:12 2012] Fit fullrun_mos1_xmm0506210701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 11 04:27:00 2012] Spatial fit model total counts = 25638.800000, observed total counts = 25372.000000
[Sun Mar 11 04:27:00 2012] Offset between fit and detection position for source 2 = 0.148488 pixels
[Sun Mar 11 04:27:00 2012] 25663.550000 total counts/ 8913.250000 bgd. counts: snr = 177.420805
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.148488 pixels
  Position = (300.1, 274.7) = 18 21 57.20 64 20 36.5
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 16750.3 +/- 160.2
  Background counts = 8913.2
  Rate = 2 +/- 0.02
[Sun Mar 11 04:27:00 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 04:27:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 04:27:00 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 04:27:00 2012] Source does appear to be extended
[Sun Mar 11 04:27:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 05:19:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 05:19:18 2012] Initial guess for spatial extent in simple fitting = 5.74"
[Sun Mar 11 05:19:18 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.208
[Sun Mar 11 05:19:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.74"
[Sun Mar 11 05:23:55 2012] fullrun_mos1_xmm0506210701_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 05:23:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506210701_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 05:23:55 2012] fullrun_mos1_xmm0506210701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 05:23:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506210701_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 05:23:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506210701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506210701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 05:23:55 2012] fullrun_mos1_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 05:23:55 2012] fullrun_mos1_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 05:23:55 2012] Fit fullrun_mos1_xmm0506210701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 05:39:38 2012] Spatial fit model total counts = 25676.000000, observed total counts = 25386.000000
[Sun Mar 11 05:39:38 2012] Offset between fit and detection position for source 2 = 0.013341 pixels
[Sun Mar 11 05:39:38 2012] 25796.210000 total counts/ 9004.110000 bgd. counts: snr = 176.963874
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.013341 pixels
  Position = (300.1, 274.7) = 18 21 57.20 64 20 36.4
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 16792.1 +/- 160.6
  Background counts = 9004.1
  Rate = 2 +/- 0.02
[Sun Mar 11 05:39:38 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 05:39:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 05:39:38 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 05:39:38 2012] Source does appear to be extended
[Sun Mar 11 05:39:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 06:58:46 2012] Counts = 16792.100000, rescaling region sizes by 3.000000
[Sun Mar 11 06:58:46 2012] XMMSAS src. selection expression = ellipse(26060.130060, 23850.098800, 1035.729030, 1035.729030, 0.000000, X, Y)
[Sun Mar 11 06:58:46 2012] Writing source region out to fullrun_mos1_xmm0506210701_pi300-10000_pass1_cl_src2_src.reg
[Sun Mar 11 06:58:46 2012] Extracting stamp from image fullrun_mos1_xmm0506210701_pi300-10000_cl_sm2.00.img.gz, (241, 215) - (360, 334)
[Sun Mar 11 06:58:46 2012] XMMSAS bgd. selection expression = annulus(26060.130060, 23850.098800, 5178.645149, 10357.290298, X, Y) && !ellipse(15398.440536, 22566.418274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37216.110596, 18810.851456, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 06:58:46 2012] Writing fullrun_mos1_xmm0506210701_pi300-10000_pass1_cl_src2.gif
[Sun Mar 11 06:58:54 2012] Mean detx,y = (316.88, -227.96) 
[Sun Mar 11 06:58:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 07:01:51 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 07:01:51 2012] Setting source spectrum file to fullrun_mos1_xmm0506210701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 11 07:01:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506210701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Mar 11 07:56:10 2012] Updating aperture counts using extracted products
[Sun Mar 11 07:56:10 2012] Error reading totcts from fullrun_mos1_xmm0506210701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 11 07:56:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 07:56:10 2012] Using photon index=1.80, rate=1.68, arf fullrun_mos1_xmm0506210701_pi300-10000_pass1_cl_src2.arf
[Sun Mar 11 07:56:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 07:56:10 2012] Updating source flux to 1.6e-11
[Sun Mar 11 07:56:27 2012] Reading fit data from xmm0506210701/analysis//spectral/fullrun_mos1_xmm0506210701_pi300-10000_pass1_cl_src2_pl.csv
[Sun Mar 11 07:56:27 2012] Spectral fit parameter nH value = 1.44187e+19
[Sun Mar 11 07:56:27 2012] Spectral fit parameter PhoIndex value = 1.95907
[Sun Mar 11 07:56:27 2012] Failed to get F(0.3-8.0) from xmm0506210701/analysis//spectral/fullrun_mos1_xmm0506210701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Mar 11 07:56:27 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 07:56:27 2012] Using Nh = 1.4e+19, photon index=1.96, rate=1.68, arf fullrun_mos1_xmm0506210701_pi300-10000_pass1_cl_src2.arf
[Sun Mar 11 07:56:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 07:56:27 2012] Updating source flux to 1.5e-11