[Sat Mar 17 09:11:27 2012] Detection parameters:
  Position = (311.2, 303.8) = 18 21 59.97 64 22 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.9 +/- 30.3
  Background counts = 425.7
  Rate = 0.04 +/- 0.007

[Sat Mar 17 09:11:27 2012] Off-axis axis estimate = 1.01'
[Sat Mar 17 09:14:14 2012] Using EEF radius (= 6.93 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 09:14:14 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Sat Mar 17 09:14:14 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.913
[Sat Mar 17 09:14:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.93"
[Sat Mar 17 09:45:47 2012] fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_src3.ximg exists
[Sat Mar 17 09:45:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_src3.csv
[Sat Mar 17 09:45:47 2012] fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Mar 17 09:45:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_src3.csv
[Sat Mar 17 09:45:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 09:45:47 2012] fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Mar 17 09:45:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Mar 17 09:45:47 2012] fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Mar 17 09:45:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Mar 17 09:45:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 10:16:44 2012] Source 3 is offset by 6.295133 and -2.211305 pixels which is larger than
2 X fitted extent = 3.231687 x 3.231687, not incorporating fit results
[Sat Mar 17 10:16:44 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 10:16:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 10:16:44 2012] Assessing source extent using major
[Sat Mar 17 10:16:44 2012] Source does appear to be extended
[Sat Mar 17 10:16:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 10:16:44 2012] Deleting source due to low Poisson probability 0.9