[Sat Mar 17 09:11:59 2012] Detection parameters:
  Position = (315.5, 281.8) = 18 21 57.08 64 20 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23257.8 +/- 180.9
  Background counts = 95.1
  Rate = 3 +/- 0.02

[Sat Mar 17 09:11:59 2012] Off-axis axis estimate = 1.73'
[Sat Mar 17 09:56:12 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 09:56:12 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Mar 17 09:56:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sat Mar 17 09:56:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Mar 17 10:16:40 2012] fullrun_mos2_xmm0506210501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 17 10:16:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210501_pi300-10000_cl_pass0_src1.csv
[Sat Mar 17 10:16:40 2012] fullrun_mos2_xmm0506210501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 17 10:16:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210501_pi300-10000_cl_pass0_src1.csv
[Sat Mar 17 10:16:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 10:16:40 2012] fullrun_mos2_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 17 10:16:40 2012] fullrun_mos2_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 17 10:16:40 2012] Fit fullrun_mos2_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 17 10:16:48 2012] Spatial fit model total counts = 7126.420000, observed total counts = 6753.000000
[Sat Mar 17 10:16:48 2012] Offset between fit and detection position for source 3 = 0.094002 pixels
[Sat Mar 17 10:16:48 2012] 7079.140000 total counts/ 2490.710000 bgd. counts: snr = 91.939583
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.094002 pixels
  Position = (315.5, 281.7) = 18 21 57.09 64 20 36.3
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 4588.4 +/- 84.1
  Background counts = 2490.7
  Rate = 2 +/- 0.03
[Sat Mar 17 10:16:48 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 10:16:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 10:16:48 2012] Assessing source extent using major axis lower bound
[Sat Mar 17 10:16:48 2012] Source does appear to be extended
[Sat Mar 17 10:16:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 10:51:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 17 10:51:39 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Sat Mar 17 10:51:39 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.754
[Sat Mar 17 10:51:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.34"
[Sat Mar 17 11:03:45 2012] fullrun_mos2_xmm0506210501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 17 11:03:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210501_pi300-10000_cl_pass1_src1.csv
[Sat Mar 17 11:03:45 2012] fullrun_mos2_xmm0506210501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 17 11:03:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210501_pi300-10000_cl_pass1_src1.csv
[Sat Mar 17 11:03:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 11:03:45 2012] fullrun_mos2_xmm0506210501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 17 11:03:45 2012] fullrun_mos2_xmm0506210501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 17 11:03:45 2012] Fit fullrun_mos2_xmm0506210501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 17 11:03:50 2012] Spatial fit model total counts = 7165.420000, observed total counts = 6723.000000
[Sat Mar 17 11:03:50 2012] Offset between fit and detection position for source 3 = 0.007578 pixels
[Sat Mar 17 11:03:50 2012] 7148.250000 total counts/ 2536.710000 bgd. counts: snr = 91.561009
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.007578 pixels
  Position = (315.5, 281.7) = 18 21 57.10 64 20 36.2
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 4611.5 +/- 84.5
  Background counts = 2536.7
  Rate = 2 +/- 0.03
[Sat Mar 17 11:03:50 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 11:03:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 11:03:50 2012] Assessing source extent using major axis lower bound
[Sat Mar 17 11:03:50 2012] Source does appear to be extended
[Sat Mar 17 11:03:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 12:04:10 2012] Counts = 4611.540000, rescaling region sizes by 2.000000
[Sat Mar 17 12:04:10 2012] XMMSAS src. selection expression = ellipse(27402.075600, 24456.494600, 645.274819, 645.274819, 0.000000, X, Y)
[Sat Mar 17 12:04:10 2012] Writing source region out to fullrun_mos2_xmm0506210501_pi300-10000_pass1_cl_src3_src.reg
[Sat Mar 17 12:04:10 2012] Extracting stamp from image fullrun_mos2_xmm0506210501_pi300-10000_cl_sm2.00.img.gz, (278, 245) - (353, 319)
[Sat Mar 17 12:04:10 2012] XMMSAS bgd. selection expression = annulus(27402.075600, 24456.494600, 2150.916062, 4301.832124, X, Y) && !ellipse(26579.840210, 23662.432953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27797.518951, 23471.647858, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 17 12:04:10 2012] Writing fullrun_mos2_xmm0506210501_pi300-10000_pass1_cl_src3.gif
[Sat Mar 17 12:04:14 2012] Mean detx,y = (36.70, 102.76) 
[Sat Mar 17 12:04:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 12:04:48 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 12:04:48 2012] Setting source spectrum file to fullrun_mos2_xmm0506210501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 17 12:04:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506210501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Mar 17 12:23:26 2012] Updating aperture counts using extracted products
[Sat Mar 17 12:23:26 2012] Error reading totcts from fullrun_mos2_xmm0506210501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 17 12:23:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 17 12:23:26 2012] Using photon index=1.80, rate=1.82, arf fullrun_mos2_xmm0506210501_pi300-10000_pass1_cl_src3.arf
[Sat Mar 17 12:23:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 17 12:23:27 2012] Updating source flux to 2e-11
[Sat Mar 17 12:24:18 2012] Reading fit data from xmm0506210501/analysis//spectral/fullrun_mos2_xmm0506210501_pi300-10000_pass1_cl_src3_pl.csv
[Sat Mar 17 12:24:18 2012] Spectral fit parameter nH value = 5.9785e+13
[Sat Mar 17 12:24:18 2012] Spectral fit parameter PhoIndex value = 1.93529
[Sat Mar 17 12:24:18 2012] Failed to get F(0.3-8.0) from xmm0506210501/analysis//spectral/fullrun_mos2_xmm0506210501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Mar 17 12:24:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 17 12:24:18 2012] Using Nh = 6e+13, photon index=1.94, rate=1.82, arf fullrun_mos2_xmm0506210501_pi300-10000_pass1_cl_src3.arf
[Sat Mar 17 12:24:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 17 12:24:18 2012] Updating source flux to 1.9e-11