[Sat Mar 17 09:11:43 2012] Detection parameters:
  Position = (315.3, 281.8) = 18 21 57.25 64 20 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22560.5 +/- 177.9
  Background counts = 123.6
  Rate = 2 +/- 0.02

[Sat Mar 17 09:11:43 2012] Off-axis axis estimate = 1.72'
[Sat Mar 17 09:45:47 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 09:45:47 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Mar 17 09:45:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Mar 17 09:45:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Mar 17 09:56:12 2012] fullrun_mos1_xmm0506210501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 17 09:56:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506210501_pi300-10000_cl_pass0_src1.csv
[Sat Mar 17 09:56:12 2012] fullrun_mos1_xmm0506210501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 17 09:56:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506210501_pi300-10000_cl_pass0_src1.csv
[Sat Mar 17 09:56:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506210501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506210501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 09:56:12 2012] fullrun_mos1_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 17 09:56:12 2012] fullrun_mos1_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 17 09:56:12 2012] Fit fullrun_mos1_xmm0506210501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 17 10:16:45 2012] Spatial fit model total counts = 7107.770000, observed total counts = 7150.000000
[Sat Mar 17 10:16:45 2012] Offset between fit and detection position for source 1 = 0.165104 pixels
[Sat Mar 17 10:16:45 2012] 7119.500000 total counts/ 2115.240000 bgd. counts: snr = 108.807803
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.165104 pixels
  Position = (315.3, 281.6) = 18 21 57.25 64 20 36.0
  Extent = 5.5 (5.4-5.7)", rotation angle = 0
  Source counts = 5004.3 +/- 84.4
  Background counts = 2115.2
  Rate = 2 +/- 0.03
[Sat Mar 17 10:16:45 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 10:16:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 10:16:45 2012] Assessing source extent using major axis lower bound
[Sat Mar 17 10:16:45 2012] Source does appear to be extended
[Sat Mar 17 10:16:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 10:16:45 2012] Source is confused with source 2
[Sat Mar 17 10:16:45 2012] Source is confused with source 3
[Sat Mar 17 10:31:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 17 10:31:43 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Sat Mar 17 10:31:43 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.715
[Sat Mar 17 10:31:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.54"
[Sat Mar 17 10:51:39 2012] fullrun_mos1_xmm0506210501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 17 10:51:39 2012] fullrun_mos1_xmm0506210501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 17 10:51:39 2012] Fit fullrun_mos1_xmm0506210501_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Mar 17 10:51:39 2012] fullrun_mos1_xmm0506210501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 17 10:51:39 2012] fullrun_mos1_xmm0506210501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 17 10:51:39 2012] Fit fullrun_mos1_xmm0506210501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 17 11:03:49 2012] Spatial fit model total counts = 7086.000000, observed total counts = 7145.000000
[Sat Mar 17 11:03:49 2012] Offset between fit and detection position for source 1 = 0.014487 pixels
[Sat Mar 17 11:03:49 2012] 7126.940000 total counts/ 2093.320000 bgd. counts: snr = 110.017714
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014487 pixels
  Position = (315.3, 281.6) = 18 21 57.25 64 20 36.0
  Extent = 5.6 (5.4-5.7)", rotation angle = 0
  Source counts = 5033.6 +/- 84.4
  Background counts = 2093.3
  Rate = 2 +/- 0.03
[Sat Mar 17 11:03:49 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 11:03:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 11:03:49 2012] Assessing source extent using major axis lower bound
[Sat Mar 17 11:03:49 2012] Source does appear to be extended
[Sat Mar 17 11:03:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 11:51:43 2012] Counts = 5033.620000, rescaling region sizes by 2.000000
[Sat Mar 17 11:51:43 2012] XMMSAS src. selection expression = ellipse(27382.120800, 24451.602800, 668.904019, 668.904019, 0.000000, X, Y)
[Sat Mar 17 11:51:43 2012] Writing source region out to fullrun_mos1_xmm0506210501_pi300-10000_pass1_cl_src1_src.reg
[Sat Mar 17 11:51:43 2012] Extracting stamp from image fullrun_mos1_xmm0506210501_pi300-10000_cl_sm2.00.img.gz, (277, 243) - (354, 320)
[Sat Mar 17 11:51:43 2012] XMMSAS bgd. selection expression = annulus(27382.120800, 24451.602800, 2229.680064, 4459.360128, X, Y) && !ellipse(26743.092651, 24379.580261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26987.947418, 24828.041260, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 17 11:51:43 2012] Writing fullrun_mos1_xmm0506210501_pi300-10000_pass1_cl_src1.gif
[Sat Mar 17 11:51:47 2012] Mean detx,y = (306.93, -192.40) 
[Sat Mar 17 11:51:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 11:52:25 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 11:52:25 2012] Setting source spectrum file to fullrun_mos1_xmm0506210501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 17 11:52:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0506210501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Mar 17 12:23:26 2012] Updating aperture counts using extracted products
[Sat Mar 17 12:23:26 2012] Error reading totcts from fullrun_mos1_xmm0506210501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 17 12:23:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 17 12:23:26 2012] Using photon index=1.80, rate=1.79, arf fullrun_mos1_xmm0506210501_pi300-10000_pass1_cl_src1.arf
[Sat Mar 17 12:23:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 17 12:23:26 2012] Updating source flux to 1.8e-11
[Sat Mar 17 12:23:28 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Mar 17 12:23:49 2012] Reading fit data from xmm0506210501/analysis//spectral/fullrun_mos1_xmm0506210501_pi300-10000_pass1_cl_src1_pl.csv
[Sat Mar 17 12:23:49 2012] Spectral fit parameter nH value = 6.06032e+19
[Sat Mar 17 12:23:49 2012] Spectral fit parameter PhoIndex value = 1.97662
[Sat Mar 17 12:23:49 2012] Failed to get F(0.3-8.0) from xmm0506210501/analysis//spectral/fullrun_mos1_xmm0506210501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Mar 17 12:23:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 17 12:23:49 2012] Using Nh = 6.1e+19, photon index=1.98, rate=1.79, arf fullrun_mos1_xmm0506210501_pi300-10000_pass1_cl_src1.arf
[Sat Mar 17 12:23:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 17 12:23:49 2012] Updating source flux to 1.7e-11