[Tue Mar 27 11:02:28 2012] Detection parameters:
  Position = (315.9, 483.0) = 18 22 0.79 64 34 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.0 +/- 16.4
  Background counts = 67.4
  Rate = 0.006 +/- 0.001

[Tue Mar 27 11:02:28 2012] Off-axis axis estimate = 13.44'
[Tue Mar 27 18:02:22 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 18:02:22 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Tue Mar 27 18:02:22 2012] source mask rpix=3.0, npix_max = 49, mask sum = 38, frac = 0.765
[Tue Mar 27 18:02:22 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 13.15"
[Tue Mar 27 18:46:22 2012] fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src9.ximg exists
[Tue Mar 27 18:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src9.csv
[Tue Mar 27 18:46:22 2012] fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Mar 27 18:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src9.csv
[Tue Mar 27 18:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 18:46:22 2012] fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Mar 27 18:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Mar 27 18:46:22 2012] fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Mar 27 18:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Mar 27 18:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 18:46:35 2012] Source 7 is offset by 4.740244 and 3.543005 pixels which is larger than
2 X fitted extent = 1.511540 x 1.511540, not incorporating fit results
[Tue Mar 27 18:46:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 18:46:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 18:46:35 2012] Assessing source extent using major
[Tue Mar 27 18:46:35 2012] Source does appear to be extended
[Tue Mar 27 18:46:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 18:46:35 2012] Deleting source due to low Poisson probability 0.9