[Tue Mar 27 11:02:27 2012] Detection parameters:
  Position = (136.9, 236.2) = 18 24 0.53 64 16 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.7 +/- 18.1
  Background counts = 82.0
  Rate = 0.008 +/- 0.001

[Tue Mar 27 11:02:28 2012] Off-axis axis estimate = 12.55'
[Tue Mar 27 18:02:22 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 18:02:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 18:02:22 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Tue Mar 27 18:02:22 2012] source mask rpix=2.9, npix_max = 46, mask sum = 46, frac = 0.983
[Tue Mar 27 18:02:22 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.70"
[Tue Mar 27 18:46:22 2012] fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src6.ximg exists
[Tue Mar 27 18:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src6.csv
[Tue Mar 27 18:46:22 2012] fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Mar 27 18:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src6.csv
[Tue Mar 27 18:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 18:46:22 2012] fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Mar 27 18:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Mar 27 18:46:22 2012] fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Mar 27 18:46:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Mar 27 18:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506210101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 18:46:35 2012] Spatial fit model total counts = 266.848000, observed total counts = 236.000000
[Tue Mar 27 18:46:35 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 27 18:46:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 18:46:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 18:46:35 2012] Assessing source extent using major
[Tue Mar 27 18:46:35 2012] Source does appear to be extended
[Tue Mar 27 18:46:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 18:46:35 2012] Deleting source due to low Poisson probability 0.9