[Fri Dec 16 11:58:02 2011] Detection parameters:
  Position = (169.0, 248.3) = 7 9 32.59 -49 38 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.3 +/- 18.2
  Background counts = 81.6
  Rate = 0.003 +/- 0.0004

[Fri Dec 16 11:58:02 2011] Off-axis axis estimate = 10.06'
[Fri Dec 16 12:00:56 2011] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 12:00:56 2011] Initial guess for spatial extent in simple fitting = 11.46"
[Fri Dec 16 12:00:56 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.916
[Fri Dec 16 12:00:56 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 11.46"
[Fri Dec 16 12:52:41 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src30.ximg exists
[Fri Dec 16 12:52:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src30.csv
[Fri Dec 16 12:52:41 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Dec 16 12:52:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src30.csv
[Fri Dec 16 12:52:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 12:52:42 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Dec 16 12:52:42 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Dec 16 12:52:42 2011] Fit fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Dec 16 13:53:57 2011] Warning, spatial fit 30 centroid is now closest to src. 31
[Fri Dec 16 13:53:57 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 13:53:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 13:53:57 2011] Assessing source extent using major
[Fri Dec 16 13:53:57 2011] Source does appear to be extended
[Fri Dec 16 13:53:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 13:54:10 2011] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:54:10 2011] Initial guess for spatial extent in simple fitting = 11.46"
[Fri Dec 16 13:54:10 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.916
[Fri Dec 16 13:54:10 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 11.46"
[Fri Dec 16 14:58:06 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src29.ximg exists
[Fri Dec 16 14:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src29.csv
[Fri Dec 16 14:58:06 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Dec 16 14:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src29.csv
[Fri Dec 16 14:58:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 14:58:07 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Dec 16 14:58:07 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Dec 16 14:58:07 2011] Fit fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Dec 16 15:42:44 2011] Spatial fit model total counts = 1170.450000, observed total counts = 1186.000000
[Fri Dec 16 15:42:44 2011] Offset between fit and detection position for source 30 = 3.128398 pixels
[Fri Dec 16 15:42:44 2011] 1094.117000 total counts/ 606.528000 bgd. counts: snr = 19.798326
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 3.128398 pixels
  Position = (172.1, 247.9) = 7 9 31.20 -49 38 8.0
  Extent = 22.9 (22.9-45.8)", rotation angle = 0
  Source counts = 487.6 +/- 33.1
  Background counts = 606.5
  Rate = 0.01 +/- 0.0008
[Fri Dec 16 15:42:44 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 15:42:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 15:42:44 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 15:42:44 2011] Source does appear to be extended
[Fri Dec 16 15:42:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 15:42:44 2011] Source is confused with source 31
[Fri Dec 16 15:42:55 2011] XMMSAS src. selection expression = ellipse(14928.462000, 21522.257000, 1375.128040, 1375.128040, 0.000000, X, Y)
[Fri Dec 16 15:42:55 2011] Writing source region out to fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src30_src.reg
[Fri Dec 16 15:42:55 2011] Extracting stamp from image fullrun_pn_xmm0506200501_pi300-10000_cl_sm2.00.img.gz, (93, 169) - (251, 327)
[Fri Dec 16 15:42:55 2011] XMMSAS bgd. selection expression = annulus(14928.462000, 21522.257000, 2291.880066, 4583.760132, X, Y) && !ellipse(16365.723600, 26310.611200, 317.057609, 317.057609, 0.000000, X, Y) && !ellipse(14648.014760, 24842.954000, 691.980820, 691.980820, 334.576000, X, Y) && !ellipse(18248.172424, 21874.951736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15969.137200, 21411.621800, 474.450414, 474.450414, 0.000000, X, Y) && !ellipse(19908.084200, 19570.970600, 451.666196, 451.666196, 0.000000, X, Y) && !ellipse(13914.862160, 18004.850028, 730.280672, 386.078497, 37.851422, X, Y)
[Fri Dec 16 15:42:55 2011] Writing fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src30.gif
[Fri Dec 16 16:04:46 2011] Mean detx,y = (-8581.40, -7666.92) 
[Fri Dec 16 16:04:49 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 16:05:12 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 16:05:12 2011] Setting source spectrum file to fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Dec 16 16:05:12 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Dec 16 19:21:58 2011] Updating aperture counts using extracted products
[Fri Dec 16 19:21:58 2011] Error reading totcts from fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Dec 16 19:21:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:21:58 2011] Using photon index=1.80, rate=0.0121, arf fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src30.arf
[Fri Dec 16 19:21:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:21:58 2011] Updating source flux to 6.1e-14
[Fri Dec 16 19:22:39 2011] Flag c found in src. 30 procflags, skipping spectral fitting