[Fri Dec 16 11:58:01 2011] Detection parameters:
  Position = (269.7, 322.7) = 7 8 47.48 -49 32 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 256.6 +/- 29.6
  Background counts = 105.9
  Rate = 0.008 +/- 0.001

[Fri Dec 16 11:58:02 2011] Off-axis axis estimate = 2.72'
[Fri Dec 16 12:00:56 2011] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 12:00:56 2011] Initial guess for spatial extent in simple fitting = 7.79"
[Fri Dec 16 12:00:56 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.191
[Fri Dec 16 12:00:56 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 7.79"
[Fri Dec 16 12:52:41 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src18.ximg exists
[Fri Dec 16 12:52:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src18.csv
[Fri Dec 16 12:52:41 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Dec 16 12:52:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src18.csv
[Fri Dec 16 12:52:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 12:52:41 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Dec 16 12:52:41 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Dec 16 12:52:41 2011] Fit fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Dec 16 13:53:56 2011] Spatial fit model total counts = 2614.990000, observed total counts = 2615.000000
[Fri Dec 16 13:53:56 2011] Offset between fit and detection position for source 18 = 2.616307 pixels
[Fri Dec 16 13:53:56 2011] Warning, changing simple spatial fit ID from 18 to 3
[Fri Dec 16 13:53:56 2011] 1881.218000 total counts/ 1728.840000 bgd. counts: snr = 3.664754
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.616307 pixels
  Position = (267.9, 324.5) = 7 8 48.30 -49 32 35.7
  Extent = 4.3 (3.4-5.2)", rotation angle = 0
  Source counts = 152.4 +/- 43.4
  Background counts = 1728.8
  Rate = 0.004 +/- 0.001
[Fri Dec 16 13:53:56 2011] Spatial fit model total counts = 3301.240000, observed total counts = 3308.000000
[Fri Dec 16 13:53:56 2011] Offset between fit and detection position for source 18 = 2.586547 pixels
[Fri Dec 16 13:53:56 2011] Warning, changing simple spatial fit ID from 3 to 20
[Fri Dec 16 13:53:56 2011] 3118.480000 total counts/ 1954.800000 bgd. counts: snr = 26.319789
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.586547 pixels
  Position = (268.9, 322.1) = 7 8 47.85 -49 32 46.0
  Extent = 14.2 (12.8-15.5)", rotation angle = 0
  Source counts = 1163.7 +/- 55.8
  Background counts = 1954.8
  Rate = 0.03 +/- 0.001
[Fri Dec 16 13:53:57 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 13:53:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 13:53:57 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 13:53:57 2011] Source does appear to be extended
[Fri Dec 16 13:53:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 13:53:57 2011] Source is confused with source 3
[Fri Dec 16 13:54:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:54:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 13:54:10 2011] Initial guess for spatial extent in simple fitting = 14.23"
[Fri Dec 16 13:54:10 2011] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.985
[Fri Dec 16 13:54:10 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 14.23"
[Fri Dec 16 14:58:06 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src18.ximg exists
[Fri Dec 16 14:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src18.csv
[Fri Dec 16 14:58:06 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Dec 16 14:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src18.csv
[Fri Dec 16 14:58:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 14:58:07 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Dec 16 14:58:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Dec 16 14:58:07 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Dec 16 14:58:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Dec 16 14:58:07 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 15:42:44 2011] Source 18 is offset by 0.515694 and -2.508529 pixels which is larger than
2 X fitted extent = 2.019779 x 2.019779, not incorporating fit results
[Fri Dec 16 15:42:44 2011] Warning, spatial fit 18 centroid is now closest to src. 16
[Fri Dec 16 15:42:44 2011] Spatial fit model total counts = 3306.510000, observed total counts = 3308.000000
[Fri Dec 16 15:42:44 2011] Offset between fit and detection position for source 18 = 0.615532 pixels
[Fri Dec 16 15:42:44 2011] Warning, changing simple spatial fit ID from 18 to 20
[Fri Dec 16 15:42:44 2011] 2834.320000 total counts/ 1824.470000 bgd. counts: snr = 23.642234
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.615532 pixels
  Position = (269.2, 322.7) = 7 8 47.74 -49 32 43.6
  Extent = 12.9 (11.3-14.6)", rotation angle = 0
  Source counts = 1009.9 +/- 53.2
  Background counts = 1824.5
  Rate = 0.03 +/- 0.001
[Fri Dec 16 15:42:44 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 15:42:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 15:42:44 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 15:42:44 2011] Source does appear to be extended
[Fri Dec 16 15:42:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 15:42:55 2011] Counts = 1009.850000, rescaling region sizes by 2.000000
[Fri Dec 16 15:42:55 2011] XMMSAS src. selection expression = ellipse(23367.681000, 28027.268000, 1550.640045, 1550.640045, 0.000000, X, Y)
[Fri Dec 16 15:42:55 2011] Writing source region out to fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src18_src.reg
[Fri Dec 16 15:42:55 2011] Extracting stamp from image fullrun_pn_xmm0506200501_pi300-10000_cl_sm2.00.img.gz, (180, 234) - (358, 412)
[Fri Dec 16 15:42:55 2011] XMMSAS bgd. selection expression = annulus(23367.681000, 28027.268000, 5168.800149, 10337.600297, X, Y) && !ellipse(24551.234800, 27493.739600, 1499.016043, 1499.016043, 0.000000, X, Y) && !ellipse(23107.512000, 28283.450000, 1278.096037, 207.903206, 198.598000, X, Y) && !ellipse(31427.488600, 38706.681200, 551.454416, 322.968009, 30.101000, X, Y) && !ellipse(33344.846893, 37272.957428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33516.312000, 37032.988000, 1340.488039, 399.510411, 47.969000, X, Y) && !ellipse(26827.199600, 36661.031400, 372.884669, 372.884669, 0.000000, X, Y) && !ellipse(26989.015660, 30795.386000, 478.252814, 478.252814, 0.000000, X, Y) && !ellipse(18603.593600, 30762.104800, 350.631210, 350.631210, 0.000000, X, Y) && !ellipse(18830.335388, 30170.390320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27907.511505, 29433.619690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27636.794200, 28895.132000, 362.681610, 362.681610, 0.000000, X, Y) && !ellipse(23524.889160, 28795.494019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.305695, 28392.917236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22912.859200, 27657.500000, 1486.000043, 1486.000043, 0.000000, X, Y) && !ellipse(16365.723600, 26310.611200, 317.057609, 317.057609, 0.000000, X, Y) && !ellipse(30411.195220, 25363.926200, 385.785611, 385.785611, 0.000000, X, Y) && !ellipse(14648.014760, 24842.954000, 691.980820, 691.980820, 334.576000, X, Y) && !ellipse(18248.172424, 21874.951736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27740.234952, 21817.555549, 651.194348, 405.600967, 120.460170, X, Y) && !ellipse(20991.851380, 21720.633400, 448.126413, 448.126413, 0.000000, X, Y) && !ellipse(14928.462000, 21522.257000, 1833.504053, 1833.504053, 0.000000, X, Y) && !ellipse(15969.137200, 21411.621800, 474.450414, 474.450414, 0.000000, X, Y) && !ellipse(19908.084200, 19570.970600, 451.666196, 451.666196, 0.000000, X, Y) && !ellipse(24249.076400, 19333.240740, 348.749610, 348.749610, 0.000000, X, Y) && !ellipse(27705.609802, 18879.886200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13914.862160, 18004.850028, 730.280672, 386.078497, 37.851422, X, Y)
[Fri Dec 16 15:42:55 2011] Writing fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src18.gif
[Fri Dec 16 15:55:51 2011] Mean detx,y = (73.58, -372.03) 
[Fri Dec 16 15:56:03 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 15:58:47 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 15:58:47 2011] Setting source spectrum file to fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Dec 16 15:58:47 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Dec 16 19:21:58 2011] Updating aperture counts using extracted products
[Fri Dec 16 19:21:58 2011] Error reading totcts from fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Dec 16 19:21:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:21:58 2011] Using photon index=1.80, rate=0.0251, arf fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src18.arf
[Fri Dec 16 19:21:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:21:58 2011] Updating source flux to 6.2e-14
[Fri Dec 16 19:22:39 2011] Flag b found in src. 18 procflags, skipping spectral fitting
[Fri Dec 16 19:22:39 2011] Flag c found in src. 18 procflags, skipping spectral fitting