[Fri Dec 16 11:58:01 2011] Detection parameters:
  Position = (282.8, 316.8) = 7 8 41.64 -49 33 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233605.8 +/- 558.6
  Background counts = 108.5
  Rate = 6 +/- 0.02

[Fri Dec 16 11:58:02 2011] Off-axis axis estimate = 1.75'
[Fri Dec 16 12:00:56 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 12:00:56 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Dec 16 12:00:56 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri Dec 16 12:00:56 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Fri Dec 16 12:52:41 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 16 12:52:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 12:52:41 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 16 12:52:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 12:52:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 12:52:41 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 16 12:52:41 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 16 12:52:41 2011] Fit fullrun_pn_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 16 13:53:56 2011] Spatial fit model total counts = 206080.000000, observed total counts = 202573.000000
[Fri Dec 16 13:53:56 2011] Offset between fit and detection position for source 1 = 0.411579 pixels
[Fri Dec 16 13:53:56 2011] 207280.000000 total counts/ 25600.000000 bgd. counts: snr = 1135.500000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.411579 pixels
  Position = (282.7, 316.4) = 7 8 41.67 -49 33 11.2
  Extent = 7.1 (7.1-7.1)", rotation angle = 0
  Source counts = 181680.0 +/- 455.3
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Fri Dec 16 13:53:57 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 13:53:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 13:53:57 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 13:53:57 2011] Source does appear to be extended
[Fri Dec 16 13:53:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 13:54:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:54:10 2011] Initial guess for spatial extent in simple fitting = 7.07"
[Fri Dec 16 13:54:10 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885
[Fri Dec 16 13:54:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.07"
[Fri Dec 16 14:58:06 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 16 14:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src1.csv
[Fri Dec 16 14:58:06 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 16 14:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src1.csv
[Fri Dec 16 14:58:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 14:58:06 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 16 14:58:06 2011] fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 16 14:58:06 2011] Fit fullrun_pn_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 16 15:42:44 2011] Spatial fit model total counts = 196650.000000, observed total counts = 202908.000000
[Fri Dec 16 15:42:44 2011] Offset between fit and detection position for source 1 = 0.211318 pixels
[Fri Dec 16 15:42:44 2011] 196752.000000 total counts/ 25600.000000 bgd. counts: snr = 1069.700000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.211318 pixels
  Position = (282.8, 316.6) = 7 8 41.66 -49 33 10.3
  Extent = 6.2 (6.2-6.3)", rotation angle = 0
  Source counts = 171152.0 +/- 443.6
  Background counts = 25600.0
  Rate = 4 +/- 0.01
[Fri Dec 16 15:42:44 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 15:42:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 15:42:44 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 15:42:44 2011] Source does appear to be extended
[Fri Dec 16 15:42:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 15:42:54 2011] Counts = 171152.000000, rescaling region sizes by 3.000000
[Fri Dec 16 15:42:54 2011] XMMSAS src. selection expression = ellipse(24551.234800, 27493.739600, 1124.262032, 1124.262032, 0.000000, X, Y)
[Fri Dec 16 15:42:54 2011] Writing source region out to fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 16 15:42:54 2011] Extracting stamp from image fullrun_pn_xmm0506200501_pi300-10000_cl_sm2.00.img.gz, (218, 252) - (347, 381)
[Fri Dec 16 15:42:54 2011] XMMSAS bgd. selection expression = annulus(24551.234800, 27493.739600, 5621.310162, 11242.620324, X, Y) && !ellipse(23107.512000, 28283.450000, 1278.096037, 207.903206, 198.598000, X, Y) && !ellipse(31427.488600, 38706.681200, 551.454416, 322.968009, 30.101000, X, Y) && !ellipse(33344.846893, 37272.957428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33516.312000, 37032.988000, 1340.488039, 399.510411, 47.969000, X, Y) && !ellipse(26827.199600, 36661.031400, 372.884669, 372.884669, 0.000000, X, Y) && !ellipse(26989.015660, 30795.386000, 478.252814, 478.252814, 0.000000, X, Y) && !ellipse(18603.593600, 30762.104800, 350.631210, 350.631210, 0.000000, X, Y) && !ellipse(18830.335388, 30170.390320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27907.511505, 29433.619690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27636.794200, 28895.132000, 362.681610, 362.681610, 0.000000, X, Y) && !ellipse(23524.889160, 28795.494019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27754.305695, 28392.917236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23367.681000, 28027.268000, 1033.760030, 1033.760030, 0.000000, X, Y) && !ellipse(22912.859200, 27657.500000, 1486.000043, 1486.000043, 0.000000, X, Y) && !ellipse(16365.723600, 26310.611200, 317.057609, 317.057609, 0.000000, X, Y) && !ellipse(30411.195220, 25363.926200, 385.785611, 385.785611, 0.000000, X, Y) && !ellipse(14648.014760, 24842.954000, 691.980820, 691.980820, 334.576000, X, Y) && !ellipse(18248.172424, 21874.951736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27740.234952, 21817.555549, 651.194348, 405.600967, 120.460170, X, Y) && !ellipse(20991.851380, 21720.633400, 448.126413, 448.126413, 0.000000, X, Y) && !ellipse(14928.462000, 21522.257000, 1833.504053, 1833.504053, 0.000000, X, Y) && !ellipse(15969.137200, 21411.621800, 474.450414, 474.450414, 0.000000, X, Y) && !ellipse(19908.084200, 19570.970600, 451.666196, 451.666196, 0.000000, X, Y) && !ellipse(24249.076400, 19333.240740, 348.749610, 348.749610, 0.000000, X, Y) && !ellipse(27705.609802, 18879.886200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13914.862160, 18004.850028, 730.280672, 386.078497, 37.851422, X, Y) && !ellipse(25188.339355, 15408.303970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.835297, 39341.278351, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 16 15:42:54 2011] Writing fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src1.gif
[Fri Dec 16 15:43:31 2011] Mean detx,y = (60.92, -275.38) 
[Fri Dec 16 15:43:40 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 15:46:10 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 15:46:11 2011] Setting source spectrum file to fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 16 15:46:11 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 16 19:21:58 2011] Updating aperture counts using extracted products
[Fri Dec 16 19:21:58 2011] Error reading totcts from fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 16 19:21:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:21:58 2011] Using photon index=1.80, rate=4.26, arf fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src1.arf
[Fri Dec 16 19:21:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:21:58 2011] Updating source flux to 1e-11
[Fri Dec 16 19:24:13 2011] Reading fit data from xmm0506200501/analysis//spectral/fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec 16 19:24:13 2011] Spectral fit parameter nH value = 1.22588e+21
[Fri Dec 16 19:24:13 2011] Spectral fit parameter PhoIndex value = 3.88925
[Fri Dec 16 19:24:13 2011] Failed to get F(0.3-8.0) from xmm0506200501/analysis//spectral/fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec 16 19:24:13 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:24:13 2011] Using Nh = 1.2e+21, photon index=3.89, rate=4.26, arf fullrun_pn_xmm0506200501_pi300-10000_pass1_cl_src1.arf
[Fri Dec 16 19:24:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:24:13 2011] Updating source flux to 5.7e-12