[Fri Dec 16 11:58:31 2011] Detection parameters:
  Position = (282.9, 316.3) = 7 8 41.59 -49 33 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65176.2 +/- 301.2
  Background counts = 31.5
  Rate = 1 +/- 0.007

[Fri Dec 16 11:58:32 2011] Off-axis axis estimate = 1.72'
[Fri Dec 16 13:14:59 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:14:59 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Dec 16 13:14:59 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Fri Dec 16 13:14:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Dec 16 13:53:51 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 16 13:53:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 13:53:51 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 16 13:53:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 13:53:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 13:53:51 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 16 13:53:51 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 16 13:53:51 2011] Fit fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 16 13:54:02 2011] Spatial fit model total counts = 56916.400000, observed total counts = 56885.000000
[Fri Dec 16 13:54:02 2011] Offset between fit and detection position for source 3 = 0.257701 pixels
[Fri Dec 16 13:54:02 2011] 56807.600000 total counts/ 11108.500000 bgd. counts: snr = 433.590679
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.257701 pixels
  Position = (282.8, 316.5) = 7 8 41.64 -49 33 10.5
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 45699.1 +/- 238.3
  Background counts = 11108.5
  Rate = 1 +/- 0.005
[Fri Dec 16 13:54:02 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 13:54:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 13:54:02 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 13:54:02 2011] Source does appear to be extended
[Fri Dec 16 13:54:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 15:12:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 15:12:08 2011] Initial guess for spatial extent in simple fitting = 5.41"
[Fri Dec 16 15:12:08 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.985
[Fri Dec 16 15:12:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Fri Dec 16 15:42:39 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 16 15:42:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src1.csv
[Fri Dec 16 15:42:39 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 16 15:42:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src1.csv
[Fri Dec 16 15:42:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 15:42:39 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 16 15:42:39 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 16 15:42:39 2011] Fit fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 16 15:42:48 2011] Spatial fit model total counts = 56811.200000, observed total counts = 56790.000000
[Fri Dec 16 15:42:48 2011] Offset between fit and detection position for source 3 = 0.012403 pixels
[Fri Dec 16 15:42:48 2011] 56956.600000 total counts/ 11557.700000 bgd. counts: snr = 422.288857
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.012403 pixels
  Position = (282.8, 316.5) = 7 8 41.65 -49 33 10.5
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 45398.9 +/- 238.7
  Background counts = 11557.7
  Rate = 1 +/- 0.005
[Fri Dec 16 15:42:48 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 15:42:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 15:42:48 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 15:42:48 2011] Source does appear to be extended
[Fri Dec 16 15:42:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 18:58:42 2011] Counts = 45398.900000, rescaling region sizes by 3.000000
[Fri Dec 16 18:58:42 2011] XMMSAS src. selection expression = ellipse(24553.490600, 27488.634200, 967.674628, 967.674628, 0.000000, X, Y)
[Fri Dec 16 18:58:42 2011] Writing source region out to fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 16 18:58:42 2011] Extracting stamp from image fullrun_mos2_xmm0506200501_pi300-10000_cl_sm2.00.img.gz, (227, 261) - (338, 372)
[Fri Dec 16 18:58:42 2011] XMMSAS bgd. selection expression = annulus(24553.490600, 27488.634200, 4838.373139, 9676.746278, X, Y) && !ellipse(24226.985107, 28541.126282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25081.838165, 28326.897278, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 16 18:58:42 2011] Writing fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src3.gif
[Fri Dec 16 18:58:49 2011] Mean detx,y = (103.77, 133.83) 
[Fri Dec 16 18:58:50 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 19:00:52 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 19:00:52 2011] Setting source spectrum file to fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 16 19:00:52 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Dec 16 19:21:58 2011] Updating aperture counts using extracted products
[Fri Dec 16 19:21:58 2011] Error reading totcts from fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 16 19:21:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:21:59 2011] Using photon index=1.80, rate=0.976, arf fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src3.arf
[Fri Dec 16 19:21:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:21:59 2011] Updating source flux to 1e-11
[Fri Dec 16 19:22:39 2011] Reading fit data from xmm0506200501/analysis//spectral/fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src3_pl.csv
[Fri Dec 16 19:22:39 2011] Spectral fit parameter nH value = 8.16324e+20
[Fri Dec 16 19:22:39 2011] Spectral fit parameter PhoIndex value = 3.56288
[Fri Dec 16 19:22:39 2011] Failed to get F(0.3-8.0) from xmm0506200501/analysis//spectral/fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Dec 16 19:22:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:22:39 2011] Using Nh = 8.2e+20, photon index=3.56, rate=0.976, arf fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src3.arf
[Fri Dec 16 19:22:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:22:39 2011] Updating source flux to 7e-12