[Fri Dec 16 11:58:32 2011] Detection parameters:
  Position = (279.0, 328.6) = 7 8 43.32 -49 32 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.3 +/- 18.1
  Background counts = 31.1
  Rate = 0.004 +/- 0.0005

[Fri Dec 16 11:58:32 2011] Off-axis axis estimate = 2.60'
[Fri Dec 16 13:14:59 2011] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:14:59 2011] Initial guess for spatial extent in simple fitting = 7.73"
[Fri Dec 16 13:14:59 2011] source mask rpix=1.8, npix_max = 20, mask sum = 11, frac = 0.530
[Fri Dec 16 13:14:59 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 7.73"
[Fri Dec 16 13:53:51 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src8.ximg exists
[Fri Dec 16 13:53:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src8.csv
[Fri Dec 16 13:53:51 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Dec 16 13:53:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src8.csv
[Fri Dec 16 13:53:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 13:53:51 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Dec 16 13:53:51 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Dec 16 13:53:51 2011] Fit fullrun_mos2_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Dec 16 13:54:02 2011] Source 24 is offset by -2.126240 and 6.723773 pixels which is larger than
2 X fitted extent = 6.340920 x 6.340920, not incorporating fit results
[Fri Dec 16 13:54:02 2011] Source 24 is offset by -3.082539 and 8.505291 pixels which is larger than
2 X fitted extent = 2.354074 x 6.887816, not incorporating fit results
[Fri Dec 16 13:54:02 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 13:54:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 13:54:02 2011] Assessing source extent using major
[Fri Dec 16 13:54:02 2011] Source does appear to be extended
[Fri Dec 16 13:54:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 15:12:08 2011] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 15:12:08 2011] Initial guess for spatial extent in simple fitting = 7.73"
[Fri Dec 16 15:12:08 2011] source mask rpix=1.8, npix_max = 20, mask sum = 11, frac = 0.530
[Fri Dec 16 15:12:08 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.73"
[Fri Dec 16 15:42:39 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src7.ximg exists
[Fri Dec 16 15:42:39 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src7.csv
[Fri Dec 16 15:42:39 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Dec 16 15:42:39 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src7.csv
[Fri Dec 16 15:42:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 15:42:39 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Dec 16 15:42:39 2011] fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Dec 16 15:42:39 2011] Fit fullrun_mos2_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Dec 16 15:42:48 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 17.659844 pixels away
[Fri Dec 16 15:42:48 2011] Source 24 is offset by -3.082539 and 8.505291 pixels which is larger than
2 X fitted extent = 6.513563 x 2.560897, not incorporating fit results
[Fri Dec 16 15:42:48 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 15:42:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 15:42:48 2011] Assessing source extent using major
[Fri Dec 16 15:42:48 2011] Source does appear to be extended
[Fri Dec 16 15:42:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 18:58:42 2011] XMMSAS src. selection expression = ellipse(24226.985107, 28541.126282, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 16 18:58:42 2011] Writing source region out to fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src24_src.reg
[Fri Dec 16 18:58:42 2011] Extracting stamp from image fullrun_mos2_xmm0506200501_pi300-10000_cl_sm2.00.img.gz, (242, 291) - (317, 366)
[Fri Dec 16 18:58:42 2011] XMMSAS bgd. selection expression = annulus(24226.985107, 28541.126282, 1087.500000, 2175.000000, X, Y) && !ellipse(24553.490600, 27488.634200, 1290.232837, 1290.232837, 0.000000, X, Y) && !ellipse(25081.838165, 28326.897278, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 16 18:58:42 2011] Writing fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src24.gif
[Fri Dec 16 19:01:40 2011] Mean detx,y = (-529.72, 592.50) 
[Fri Dec 16 19:01:41 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 19:01:52 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 19:01:52 2011] Setting source spectrum file to fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Dec 16 19:01:52 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri Dec 16 19:16:28 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 16 19:16:28 2011] rmf not generated due to insufficient counts
[Fri Dec 16 19:21:58 2011] Updating aperture counts using extracted products
[Fri Dec 16 19:21:59 2011] Error reading totcts from fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Dec 16 19:21:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:21:59 2011] Using photon index=1.80, rate=0.00352, arf fullrun_mos2_xmm0506200501_pi300-10000_pass1_cl_src24.arf
[Fri Dec 16 19:21:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:21:59 2011] Updating source flux to 3.7e-14
[Fri Dec 16 19:22:17 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting