[Fri Dec 16 11:58:16 2011] Detection parameters:
  Position = (388.0, 423.9) = 7 7 54.71 -49 25 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.5 +/- 13.9
  Background counts = 26.2
  Rate = 0.002 +/- 0.0003

[Fri Dec 16 11:58:16 2011] Off-axis axis estimate = 11.18'
[Fri Dec 16 12:52:42 2011] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 12:52:42 2011] Initial guess for spatial extent in simple fitting = 12.02"
[Fri Dec 16 12:52:42 2011] source mask rpix=2.8, npix_max = 42, mask sum = 35, frac = 0.822
[Fri Dec 16 12:52:42 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 12.02"
[Fri Dec 16 13:14:59 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src16.ximg exists
[Fri Dec 16 13:14:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src16.csv
[Fri Dec 16 13:14:59 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Dec 16 13:14:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src16.csv
[Fri Dec 16 13:14:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 13:14:59 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Dec 16 13:14:59 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Dec 16 13:14:59 2011] Fit fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Dec 16 13:53:59 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.902171 pixels away
[Fri Dec 16 13:53:59 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 13:53:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 13:53:59 2011] Assessing source extent using major
[Fri Dec 16 13:53:59 2011] Source does appear to be extended
[Fri Dec 16 13:53:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 14:58:07 2011] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 14:58:07 2011] Initial guess for spatial extent in simple fitting = 12.02"
[Fri Dec 16 14:58:07 2011] source mask rpix=2.8, npix_max = 42, mask sum = 35, frac = 0.822
[Fri Dec 16 14:58:07 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 12.02"
[Fri Dec 16 15:12:07 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src16.ximg exists
[Fri Dec 16 15:12:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src16.csv
[Fri Dec 16 15:12:07 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Dec 16 15:12:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src16.csv
[Fri Dec 16 15:12:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 15:12:08 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Dec 16 15:12:08 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri Dec 16 15:12:08 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Dec 16 15:12:08 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri Dec 16 15:12:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 15:42:46 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 15.718686 pixels away
[Fri Dec 16 15:42:46 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 15:42:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 15:42:46 2011] Assessing source extent using major
[Fri Dec 16 15:42:46 2011] Source does appear to be extended
[Fri Dec 16 15:42:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 18:16:47 2011] XMMSAS src. selection expression = ellipse(33708.248718, 36829.859589, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 16 18:16:47 2011] Writing source region out to fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src9_src.reg
[Fri Dec 16 18:16:47 2011] Extracting stamp from image fullrun_mos1_xmm0506200501_pi300-10000_cl_sm2.00.img.gz, (351, 386) - (426, 461)
[Fri Dec 16 18:16:47 2011] XMMSAS bgd. selection expression = annulus(33708.248718, 36829.859589, 1087.500000, 2175.000000, X, Y)
[Fri Dec 16 18:16:47 2011] Writing fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src9.gif
[Fri Dec 16 18:21:12 2011] Mean detx,y = (-5621.10, 11347.69) 
[Fri Dec 16 18:21:13 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 18:21:20 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 18:21:20 2011] Setting source spectrum file to fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Dec 16 18:21:20 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Dec 16 18:58:40 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 16 18:58:40 2011] rmf not generated due to insufficient counts
[Fri Dec 16 19:21:58 2011] Updating aperture counts using extracted products
[Fri Dec 16 19:21:58 2011] Error reading totcts from fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Dec 16 19:21:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:21:58 2011] Using photon index=1.80, rate=0.00223, arf fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src9.arf
[Fri Dec 16 19:21:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:21:58 2011] Updating source flux to 4.1e-14
[Fri Dec 16 19:22:00 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting