[Fri Dec 16 11:58:16 2011] Detection parameters:
  Position = (283.0, 316.7) = 7 8 41.55 -49 33 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58422.3 +/- 284.4
  Background counts = 33.7
  Rate = 1 +/- 0.006

[Fri Dec 16 11:58:16 2011] Off-axis axis estimate = 1.73'
[Fri Dec 16 12:52:42 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 12:52:42 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Dec 16 12:52:42 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Fri Dec 16 12:52:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Fri Dec 16 13:14:59 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 16 13:14:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 13:14:59 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 16 13:14:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 13:14:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 13:14:59 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 16 13:14:59 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 16 13:14:59 2011] Fit fullrun_mos1_xmm0506200501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 16 13:53:59 2011] Spatial fit model total counts = 52265.300000, observed total counts = 52268.000000
[Fri Dec 16 13:53:59 2011] Offset between fit and detection position for source 3 = 0.260512 pixels
[Fri Dec 16 13:53:59 2011] 52131.900000 total counts/ 11091.000000 bgd. counts: snr = 389.701003
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.260512 pixels
  Position = (282.8, 316.5) = 7 8 41.62 -49 33 10.5
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 41040.9 +/- 228.3
  Background counts = 11091.0
  Rate = 0.9 +/- 0.005
[Fri Dec 16 13:53:59 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 13:53:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 13:53:59 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 13:53:59 2011] Source does appear to be extended
[Fri Dec 16 13:53:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 14:58:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 14:58:07 2011] Initial guess for spatial extent in simple fitting = 5.68"
[Fri Dec 16 14:58:07 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.919
[Fri Dec 16 14:58:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.68"
[Fri Dec 16 15:12:07 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 16 15:12:07 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src1.csv
[Fri Dec 16 15:12:07 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 16 15:12:07 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src1.csv
[Fri Dec 16 15:12:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 15:12:07 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 16 15:12:07 2011] fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 16 15:12:07 2011] Fit fullrun_mos1_xmm0506200501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 16 15:42:46 2011] Spatial fit model total counts = 52308.700000, observed total counts = 52312.000000
[Fri Dec 16 15:42:46 2011] Offset between fit and detection position for source 3 = 0.014445 pixels
[Fri Dec 16 15:42:46 2011] 52386.600000 total counts/ 11166.700000 bgd. counts: snr = 390.071760
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.014445 pixels
  Position = (282.8, 316.5) = 7 8 41.62 -49 33 10.6
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 41219.9 +/- 228.9
  Background counts = 11166.7
  Rate = 0.9 +/- 0.005
[Fri Dec 16 15:42:46 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 15:42:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 15:42:46 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 15:42:46 2011] Source does appear to be extended
[Fri Dec 16 15:42:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 18:16:47 2011] Counts = 41219.900000, rescaling region sizes by 3.000000
[Fri Dec 16 18:16:47 2011] XMMSAS src. selection expression = ellipse(24559.239080, 27487.490600, 1028.647830, 1028.647830, 0.000000, X, Y)
[Fri Dec 16 18:16:47 2011] Writing source region out to fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 16 18:16:47 2011] Extracting stamp from image fullrun_mos1_xmm0506200501_pi300-10000_cl_sm2.00.img.gz, (224, 257) - (342, 376)
[Fri Dec 16 18:16:47 2011] XMMSAS bgd. selection expression = annulus(24559.239080, 27487.490600, 5143.239148, 10286.478296, X, Y) && !ellipse(16289.771042, 31732.386536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26823.521454, 36666.304474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15949.664444, 21377.216049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33708.248718, 36829.859589, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 16 18:16:47 2011] Writing fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src3.gif
[Fri Dec 16 18:16:53 2011] Mean detx,y = (342.84, -252.33) 
[Fri Dec 16 18:16:54 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 18:18:43 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 18:18:43 2011] Setting source spectrum file to fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 16 18:18:43 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Dec 16 19:21:58 2011] Updating aperture counts using extracted products
[Fri Dec 16 19:21:58 2011] Error reading totcts from fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 16 19:21:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:21:58 2011] Using photon index=1.80, rate=0.886, arf fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src3.arf
[Fri Dec 16 19:21:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:21:58 2011] Updating source flux to 8.3e-12
[Fri Dec 16 19:22:17 2011] Reading fit data from xmm0506200501/analysis//spectral/fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src3_pl.csv
[Fri Dec 16 19:22:17 2011] Spectral fit parameter nH value = 8.30939e+20
[Fri Dec 16 19:22:17 2011] Spectral fit parameter PhoIndex value = 3.61069
[Fri Dec 16 19:22:17 2011] Failed to get F(0.3-8.0) from xmm0506200501/analysis//spectral/fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Dec 16 19:22:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 19:22:17 2011] Using Nh = 8.3e+20, photon index=3.61, rate=0.886, arf fullrun_mos1_xmm0506200501_pi300-10000_pass1_cl_src3.arf
[Fri Dec 16 19:22:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 19:22:17 2011] Updating source flux to 5.8e-12