[Sat Jul 28 14:22:35 2012] Detection parameters:
  Position = (278.8, 311.8) = 7 8 41.48 -49 33 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179834.5 +/- 495.1
  Background counts = 268.4
  Rate = 5 +/- 0.01

[Sat Jul 28 14:22:36 2012] Off-axis axis estimate = 1.72'
[Sat Jul 28 14:26:47 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 14:26:47 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jul 28 14:26:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Jul 28 14:26:47 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Sat Jul 28 15:04:05 2012] fullrun_pn_xmm0506200401_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jul 28 15:04:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200401_pi300-10000_cl_pass0_src3.csv
[Sat Jul 28 15:04:05 2012] fullrun_pn_xmm0506200401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jul 28 15:04:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200401_pi300-10000_cl_pass0_src3.csv
[Sat Jul 28 15:04:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 15:04:06 2012] fullrun_pn_xmm0506200401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jul 28 15:04:06 2012] fullrun_pn_xmm0506200401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jul 28 15:04:06 2012] Fit fullrun_pn_xmm0506200401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jul 28 15:56:44 2012] Spatial fit model total counts = 112422.000000, observed total counts = 110360.000000
[Sat Jul 28 15:56:44 2012] Offset between fit and detection position for source 3 = 0.199158 pixels
[Sat Jul 28 15:56:44 2012] 112624.200000 total counts/ 22665.500000 bgd. counts: snr = 597.531106
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.199158 pixels
  Position = (278.8, 311.6) = 7 8 41.47 -49 33 8.5
  Extent = 6.0 (6.0-6.1)", rotation angle = 0
  Source counts = 89958.7 +/- 335.6
  Background counts = 22665.5
  Rate = 3 +/- 0.01
[Sat Jul 28 15:56:44 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 15:56:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 15:56:44 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 15:56:44 2012] Source does appear to be extended
[Sat Jul 28 15:56:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 15:56:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 28 15:56:57 2012] Initial guess for spatial extent in simple fitting = 6.03"
[Sat Jul 28 15:56:57 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.843
[Sat Jul 28 15:56:57 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.03"
[Sat Jul 28 16:28:29 2012] fullrun_pn_xmm0506200401_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jul 28 16:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200401_pi300-10000_cl_pass1_src3.csv
[Sat Jul 28 16:28:29 2012] fullrun_pn_xmm0506200401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jul 28 16:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200401_pi300-10000_cl_pass1_src3.csv
[Sat Jul 28 16:28:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 16:28:29 2012] fullrun_pn_xmm0506200401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jul 28 16:28:29 2012] fullrun_pn_xmm0506200401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jul 28 16:28:29 2012] Fit fullrun_pn_xmm0506200401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jul 28 17:02:20 2012] Spatial fit model total counts = 112406.000000, observed total counts = 110360.000000
[Sat Jul 28 17:02:20 2012] Offset between fit and detection position for source 3 = 0.000328 pixels
[Sat Jul 28 17:02:20 2012] 112609.200000 total counts/ 22676.400000 bgd. counts: snr = 597.215486
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000328 pixels
  Position = (278.8, 311.6) = 7 8 41.47 -49 33 8.5
  Extent = 6.0 (6.0-6.1)", rotation angle = 0
  Source counts = 89932.8 +/- 335.6
  Background counts = 22676.4
  Rate = 3 +/- 0.01
[Sat Jul 28 17:02:20 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 17:02:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 17:02:20 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 17:02:20 2012] Source does appear to be extended
[Sat Jul 28 17:02:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 17:02:30 2012] Counts = 89932.800000, rescaling region sizes by 3.000000
[Sat Jul 28 17:02:30 2012] XMMSAS src. selection expression = ellipse(24208.275600, 27058.659400, 1085.641231, 1085.641231, 0.000000, X, Y)
[Sat Jul 28 17:02:30 2012] Writing source region out to fullrun_pn_xmm0506200401_pi300-10000_pass1_cl_src3_src.reg
[Sat Jul 28 17:02:30 2012] Extracting stamp from image fullrun_pn_xmm0506200401_pi300-10000_cl_sm2.00.img.gz, (216, 249) - (341, 374)
[Sat Jul 28 17:02:30 2012] XMMSAS bgd. selection expression = annulus(24208.275600, 27058.659400, 5428.206156, 10856.412312, X, Y) && !ellipse(15616.529953, 20788.538971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28352.826294, 15340.673737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.154200, 36232.941200, 406.452012, 406.452012, 0.000000, X, Y) && !ellipse(15938.977951, 31272.492981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18483.990799, 29683.898682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27545.663640, 29209.066200, 367.656011, 367.656011, 0.000000, X, Y) && !ellipse(31004.595215, 28643.111267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22983.008301, 28036.115814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23114.750854, 27290.660583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23162.167023, 26859.279388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30089.836731, 25055.088745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17893.801682, 21467.355621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20610.282959, 21277.823700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.159546, 21353.437607, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 17:02:30 2012] Writing fullrun_pn_xmm0506200401_pi300-10000_pass1_cl_src3.gif
[Sat Jul 28 17:07:21 2012] Mean detx,y = (50.35, -244.24) 
[Sat Jul 28 17:07:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 17:12:16 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 17:12:17 2012] Setting source spectrum file to fullrun_pn_xmm0506200401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 17:12:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506200401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 28 19:02:15 2012] Updating aperture counts using extracted products
[Sat Jul 28 19:02:15 2012] Error reading totcts from fullrun_pn_xmm0506200401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 19:02:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 19:02:15 2012] Using photon index=1.80, rate=3.32, arf fullrun_pn_xmm0506200401_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 19:02:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 19:02:15 2012] Updating source flux to 7.9e-12
[Sat Jul 28 19:03:51 2012] Reading fit data from xmm0506200401/analysis//spectral/fullrun_pn_xmm0506200401_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jul 28 19:03:51 2012] Spectral fit parameter nH value = 1.59811e+21
[Sat Jul 28 19:03:51 2012] Spectral fit parameter PhoIndex value = 4.31023
[Sat Jul 28 19:03:51 2012] Failed to get F(0.3-8.0) from xmm0506200401/analysis//spectral/fullrun_pn_xmm0506200401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 19:03:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 19:03:51 2012] Using Nh = 1.6e+21, photon index=4.31, rate=3.32, arf fullrun_pn_xmm0506200401_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 19:03:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 19:03:51 2012] Updating source flux to 4.3e-12