[Sun Nov 27 22:52:06 2011] Detection parameters:
  Position = (322.3, 428.1) = 7 8 30.01 -49 25 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 343.0 +/- 24.3
  Background counts = 45.5
  Rate = 0.02 +/- 0.001

[Sun Nov 27 22:52:10 2011] Off-axis axis estimate = 9.56'
[Sun Nov 27 22:58:46 2011] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 22:58:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 22:58:46 2011] Initial guess for spatial extent in simple fitting = 11.21"
[Sun Nov 27 22:58:46 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.951
[Sun Nov 27 22:58:46 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 11.21"
[Mon Nov 28 00:36:49 2011] fullrun_pn_xmm0506200301_pi300-10000_cl_pass0_src2.ximg exists
[Mon Nov 28 00:36:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200301_pi300-10000_cl_pass0_src2.csv
[Mon Nov 28 00:36:49 2011] fullrun_pn_xmm0506200301_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Nov 28 00:36:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506200301_pi300-10000_cl_pass0_src2.csv
[Mon Nov 28 00:36:49 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 00:36:50 2011] fullrun_pn_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Nov 28 00:36:50 2011] fullrun_pn_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Nov 28 00:36:50 2011] Fit fullrun_pn_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Nov 28 03:21:35 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.074641 pixels away
[Mon Nov 28 03:21:35 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 03:21:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 03:21:35 2011] Assessing source extent using major
[Mon Nov 28 03:21:35 2011] Source does appear to be extended
[Mon Nov 28 03:21:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 03:22:11 2011] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 03:22:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Nov 28 03:22:11 2011] Initial guess for spatial extent in simple fitting = 11.21"
[Mon Nov 28 03:22:11 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.951
[Mon Nov 28 03:22:11 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 11.21"
[Mon Nov 28 04:43:14 2011] fullrun_pn_xmm0506200301_pi300-10000_cl_pass1_src2.ximg exists
[Mon Nov 28 04:43:14 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506200301_pi300-10000_cl_pass1_src2.csv
[Mon Nov 28 04:43:14 2011] fullrun_pn_xmm0506200301_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Nov 28 04:43:14 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506200301_pi300-10000_cl_pass1_src2.csv
[Mon Nov 28 04:43:14 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506200301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506200301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 04:43:14 2011] fullrun_pn_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Nov 28 04:43:14 2011] fullrun_pn_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Nov 28 04:43:14 2011] Fit fullrun_pn_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Nov 28 06:43:33 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.097529 pixels away
[Mon Nov 28 06:43:33 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 06:43:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 06:43:33 2011] Assessing source extent using major
[Mon Nov 28 06:43:33 2011] Source does appear to be extended
[Mon Nov 28 06:43:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 06:43:57 2011] XMMSAS src. selection expression = ellipse(27993.903503, 37192.831299, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 06:43:57 2011] Writing source region out to fullrun_pn_xmm0506200301_pi300-10000_pass1_cl_src2_src.reg
[Mon Nov 28 06:43:57 2011] Extracting stamp from image fullrun_pn_xmm0506200301_pi300-10000_cl_sm2.00.img.gz, (285, 391) - (360, 466)
[Mon Nov 28 06:43:57 2011] XMMSAS bgd. selection expression = annulus(27993.903503, 37192.831299, 1087.500000, 2175.000000, X, Y)
[Mon Nov 28 06:43:57 2011] Writing fullrun_pn_xmm0506200301_pi300-10000_pass1_cl_src2.gif
[Mon Nov 28 06:55:11 2011] Mean detx,y = (7435.52, -6220.13) 
[Mon Nov 28 06:55:20 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 06:56:07 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 06:56:07 2011] Setting source spectrum file to fullrun_pn_xmm0506200301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Nov 28 06:56:07 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506200301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Nov 28 08:42:13 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 08:42:13 2011] rmf not generated due to insufficient counts
[Mon Nov 28 11:53:45 2011] Updating aperture counts using extracted products
[Mon Nov 28 11:53:45 2011] Error reading totcts from fullrun_pn_xmm0506200301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Nov 28 11:53:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 11:53:48 2011] Using photon index=1.80, rate=0.0151, arf fullrun_pn_xmm0506200301_pi300-10000_pass1_cl_src2.arf
[Mon Nov 28 11:53:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 11:53:48 2011] Updating source flux to 6.5e-14
[Mon Nov 28 11:55:43 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting