[Sun Nov 27 22:53:41 2011] Detection parameters:
  Position = (435.9, 219.5) = 7 7 39.06 -49 40 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.4 +/- 10.3
  Background counts = 13.9
  Rate = 0.001 +/- 0.0003

[Sun Nov 27 22:53:42 2011] Off-axis axis estimate = 11.49'
[Mon Nov 28 01:31:36 2011] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 01:31:36 2011] Initial guess for spatial extent in simple fitting = 12.17"
[Mon Nov 28 01:31:36 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Mon Nov 28 01:31:36 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 12.17"
[Mon Nov 28 03:21:17 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src22.ximg exists
[Mon Nov 28 03:21:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src22.csv
[Mon Nov 28 03:21:17 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon Nov 28 03:21:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src22.csv
[Mon Nov 28 03:21:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 03:21:18 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon Nov 28 03:21:18 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Nov 28 03:21:18 2011] Fit fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Mon Nov 28 03:21:52 2011] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.446616 pixels away
[Mon Nov 28 03:21:52 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 03:21:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 03:21:52 2011] Assessing source extent using major
[Mon Nov 28 03:21:52 2011] Source does appear to be extended
[Mon Nov 28 03:21:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 05:34:53 2011] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 05:34:53 2011] Initial guess for spatial extent in simple fitting = 12.17"
[Mon Nov 28 05:34:53 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Mon Nov 28 05:34:53 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 12.17"
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src18.ximg exists
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Nov 28 06:43:24 2011] Fit fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src18 appears to have run properly
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Nov 28 06:43:24 2011] Fit fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Nov 28 06:43:44 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 12.339953 pixels away
[Mon Nov 28 06:43:45 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 06:43:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 06:43:45 2011] Assessing source extent using major
[Mon Nov 28 06:43:45 2011] Source does appear to be extended
[Mon Nov 28 06:43:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 11:10:12 2011] XMMSAS src. selection expression = ellipse(37873.320618, 19051.974579, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 11:10:12 2011] Writing source region out to fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src26_src.reg
[Mon Nov 28 11:10:12 2011] Extracting stamp from image fullrun_mos2_xmm0506200301_pi300-10000_cl_sm2.00.img.gz, (398, 182) - (473, 257)
[Mon Nov 28 11:10:12 2011] XMMSAS bgd. selection expression = annulus(37873.320618, 19051.974579, 1087.500000, 2175.000000, X, Y) && !ellipse(38796.208801, 21833.336807, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 11:10:12 2011] Writing fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src26.gif
[Mon Nov 28 11:26:58 2011] Mean detx,y = (-4218.32, -14283.76) 
[Mon Nov 28 11:27:00 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 11:27:17 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 11:27:18 2011] Setting source spectrum file to fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Nov 28 11:27:18 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Nov 28 11:51:53 2011] Not generating rmf since there are only 50 counts
[Mon Nov 28 11:51:53 2011] rmf not generated due to insufficient counts
[Mon Nov 28 11:53:55 2011] Updating aperture counts using extracted products
[Mon Nov 28 11:53:55 2011] Error reading totcts from fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Nov 28 11:53:56 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 11:53:56 2011] Using photon index=1.80, rate=0.00124, arf fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src26.arf
[Mon Nov 28 11:53:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 11:53:56 2011] Updating source flux to 2.9e-14
[Mon Nov 28 11:54:54 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting