[Sun Nov 27 22:53:41 2011] Detection parameters:
  Position = (446.5, 251.5) = 7 7 34.36 -49 38 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.2 +/- 11.0
  Background counts = 14.2
  Rate = 0.002 +/- 0.0003

[Sun Nov 27 22:53:42 2011] Off-axis axis estimate = 11.26'
[Mon Nov 28 01:31:36 2011] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 01:31:36 2011] Initial guess for spatial extent in simple fitting = 12.06"
[Mon Nov 28 01:31:36 2011] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.144
[Mon Nov 28 01:31:36 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 12.06"
[Mon Nov 28 03:21:17 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src17.ximg exists
[Mon Nov 28 03:21:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src17.csv
[Mon Nov 28 03:21:17 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Nov 28 03:21:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src17.csv
[Mon Nov 28 03:21:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 03:21:18 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Nov 28 03:21:18 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Nov 28 03:21:18 2011] Fit fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Nov 28 03:21:52 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.348522 pixels away
[Mon Nov 28 03:21:52 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 03:21:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 03:21:52 2011] Assessing source extent using major
[Mon Nov 28 03:21:52 2011] Source does appear to be extended
[Mon Nov 28 03:21:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 05:34:53 2011] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 05:34:53 2011] Initial guess for spatial extent in simple fitting = 12.06"
[Mon Nov 28 05:34:53 2011] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.144
[Mon Nov 28 05:34:53 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 12.06"
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src14.ximg exists
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Nov 28 06:43:24 2011] Fit fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src14 appears to have run properly
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Nov 28 06:43:24 2011] Fit fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Nov 28 06:43:44 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 53.270044 pixels away
[Mon Nov 28 06:43:44 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 15.692055 pixels away
[Mon Nov 28 06:43:45 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 06:43:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 06:43:45 2011] Assessing source extent using major
[Mon Nov 28 06:43:45 2011] Source does appear to be extended
[Mon Nov 28 06:43:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 11:10:12 2011] XMMSAS src. selection expression = ellipse(38796.208801, 21833.336807, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 11:10:12 2011] Writing source region out to fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src23_src.reg
[Mon Nov 28 11:10:12 2011] Extracting stamp from image fullrun_mos2_xmm0506200301_pi300-10000_cl_sm2.00.img.gz, (409, 214) - (484, 289)
[Mon Nov 28 11:10:12 2011] XMMSAS bgd. selection expression = annulus(38796.208801, 21833.336807, 1087.500000, 2175.000000, X, Y) && !ellipse(37873.320618, 19051.974579, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 11:10:12 2011] Writing fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src23.gif
[Mon Nov 28 11:24:49 2011] Mean detx,y = (-6660.82, -12687.33) 
[Mon Nov 28 11:24:53 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 11:25:11 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 11:25:12 2011] Setting source spectrum file to fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Nov 28 11:25:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Nov 28 11:48:15 2011] Not generating rmf since there are only 62 counts
[Mon Nov 28 11:48:15 2011] rmf not generated due to insufficient counts
[Mon Nov 28 11:53:54 2011] Updating aperture counts using extracted products
[Mon Nov 28 11:53:54 2011] Error reading totcts from fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Nov 28 11:53:56 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 11:53:56 2011] Using photon index=1.80, rate=0.00153, arf fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src23.arf
[Mon Nov 28 11:53:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 11:53:56 2011] Updating source flux to 3.2e-14
[Mon Nov 28 11:54:54 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting