[Sun Nov 27 22:53:41 2011] Detection parameters:
  Position = (300.7, 333.7) = 7 8 39.67 -49 32 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.2 +/- 10.7
  Background counts = 17.0
  Rate = 0.002 +/- 0.0004

[Sun Nov 27 22:53:42 2011] Off-axis axis estimate = 2.56'
[Mon Nov 28 01:31:36 2011] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 01:31:36 2011] Initial guess for spatial extent in simple fitting = 7.71"
[Mon Nov 28 01:31:36 2011] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.629
[Mon Nov 28 01:31:36 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 7.71"
[Mon Nov 28 03:21:17 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src14.ximg exists
[Mon Nov 28 03:21:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src14.csv
[Mon Nov 28 03:21:17 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Nov 28 03:21:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src14.csv
[Mon Nov 28 03:21:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 03:21:18 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Nov 28 03:21:18 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Nov 28 03:21:18 2011] Fit fullrun_mos2_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Nov 28 03:21:52 2011] Source 18 is offset by 5.321289 and 5.818714 pixels which is larger than
2 X fitted extent = 4.186359 x 4.186359, not incorporating fit results
[Mon Nov 28 03:21:52 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 03:21:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 03:21:52 2011] Assessing source extent using major
[Mon Nov 28 03:21:52 2011] Source does appear to be extended
[Mon Nov 28 03:21:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 05:34:53 2011] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 05:34:53 2011] Initial guess for spatial extent in simple fitting = 7.71"
[Mon Nov 28 05:34:53 2011] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.629
[Mon Nov 28 05:34:53 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 7.71"
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src12.ximg exists
[Mon Nov 28 06:43:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src12.csv
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Nov 28 06:43:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src12.csv
[Mon Nov 28 06:43:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Nov 28 06:43:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon Nov 28 06:43:24 2011] fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Nov 28 06:43:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon Nov 28 06:43:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 06:43:44 2011] Spatial fit model total counts = 576.913000, observed total counts = 769.000000
[Mon Nov 28 06:43:44 2011] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Nov 28 06:43:45 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 06:43:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 06:43:45 2011] Assessing source extent using major
[Mon Nov 28 06:43:45 2011] Source does appear to be extended
[Mon Nov 28 06:43:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 11:10:12 2011] XMMSAS src. selection expression = ellipse(26108.814117, 28985.894135, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 11:10:12 2011] Writing source region out to fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src18_src.reg
[Mon Nov 28 11:10:12 2011] Extracting stamp from image fullrun_mos2_xmm0506200301_pi300-10000_cl_sm2.00.img.gz, (263, 296) - (338, 371)
[Mon Nov 28 11:10:12 2011] XMMSAS bgd. selection expression = annulus(26108.814117, 28985.894135, 1087.500000, 2175.000000, X, Y) && !ellipse(25720.626680, 27976.010400, 1280.990437, 1280.990437, 0.000000, X, Y) && !ellipse(26708.832153, 28413.260071, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 11:10:12 2011] Writing fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src18.gif
[Mon Nov 28 11:23:40 2011] Mean detx,y = (-526.51, 557.22) 
[Mon Nov 28 11:23:44 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 11:24:16 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 11:24:16 2011] Setting source spectrum file to fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Nov 28 11:24:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Nov 28 11:45:20 2011] Not generating rmf since there are only 50 counts
[Mon Nov 28 11:45:20 2011] rmf not generated due to insufficient counts
[Mon Nov 28 11:53:54 2011] Updating aperture counts using extracted products
[Mon Nov 28 11:53:54 2011] Error reading totcts from fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Nov 28 11:53:56 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 11:53:56 2011] Using photon index=1.80, rate=0.00166, arf fullrun_mos2_xmm0506200301_pi300-10000_pass1_cl_src18.arf
[Mon Nov 28 11:53:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 11:53:56 2011] Updating source flux to 1.7e-14
[Mon Nov 28 11:54:54 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting