[Sun Nov 27 22:52:52 2011] Detection parameters:
  Position = (296.4, 322.1) = 7 8 41.56 -49 33 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16524.8 +/- 154.1
  Background counts = 18.4
  Rate = 0.4 +/- 0.004

[Sun Nov 27 22:52:53 2011] Off-axis axis estimate = 1.72'
[Mon Nov 28 00:36:51 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 00:36:51 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Nov 28 00:36:51 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Mon Nov 28 00:36:51 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Nov 28 01:31:35 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Nov 28 01:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 01:31:35 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Nov 28 01:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src1.csv
[Mon Nov 28 01:31:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 01:31:36 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Nov 28 01:31:36 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Nov 28 01:31:36 2011] Fit fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Nov 28 03:21:42 2011] Spatial fit model total counts = 14770.100000, observed total counts = 14776.000000
[Mon Nov 28 03:21:42 2011] Offset between fit and detection position for source 2 = 0.202594 pixels
[Mon Nov 28 03:21:42 2011] 14805.660000 total counts/ 3374.860000 bgd. counts: snr = 196.765406
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.202594 pixels
  Position = (296.2, 322.1) = 7 8 41.65 -49 33 7.1
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 11430.8 +/- 121.7
  Background counts = 3374.9
  Rate = 0.3 +/- 0.003
[Mon Nov 28 03:21:42 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 03:21:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 03:21:42 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 03:21:42 2011] Source does appear to be extended
[Mon Nov 28 03:21:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 04:43:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Nov 28 04:43:15 2011] Initial guess for spatial extent in simple fitting = 5.73"
[Mon Nov 28 04:43:15 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.210
[Mon Nov 28 04:43:15 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.73"
[Mon Nov 28 05:34:53 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Nov 28 05:34:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 05:34:53 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Nov 28 05:34:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src1.csv
[Mon Nov 28 05:34:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 05:34:53 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Nov 28 05:34:53 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Nov 28 05:34:53 2011] Fit fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Nov 28 06:43:37 2011] Spatial fit model total counts = 14774.300000, observed total counts = 14776.000000
[Mon Nov 28 06:43:37 2011] Offset between fit and detection position for source 2 = 0.000022 pixels
[Mon Nov 28 06:43:37 2011] 14809.890000 total counts/ 3377.190000 bgd. counts: snr = 196.730212
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000022 pixels
  Position = (296.2, 322.1) = 7 8 41.65 -49 33 7.1
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 11432.7 +/- 121.7
  Background counts = 3377.2
  Rate = 0.3 +/- 0.003
[Mon Nov 28 06:43:37 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 06:43:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 06:43:37 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 06:43:37 2011] Source does appear to be extended
[Mon Nov 28 06:43:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 09:10:30 2011] Counts = 11432.700000, rescaling region sizes by 3.000000
[Mon Nov 28 09:10:30 2011] XMMSAS src. selection expression = ellipse(25723.368440, 27976.357200, 1031.500830, 1031.500830, 0.000000, X, Y)
[Mon Nov 28 09:10:30 2011] Writing source region out to fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src2_src.reg
[Mon Nov 28 09:10:30 2011] Extracting stamp from image fullrun_mos1_xmm0506200301_pi300-10000_cl_sm2.00.img.gz, (237, 263) - (356, 381)
[Mon Nov 28 09:10:30 2011] XMMSAS bgd. selection expression = annulus(25723.368440, 27976.357200, 5157.504148, 10315.008297, X, Y) && !ellipse(17471.301559, 32232.466614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28010.529297, 37204.603699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17135.038800, 21923.604400, 497.801614, 497.801614, 0.000000, X, Y) && !ellipse(34496.935791, 37821.377625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17377.476807, 23871.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15093.582108, 24207.985718, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 09:10:30 2011] Writing fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src2.gif
[Mon Nov 28 09:10:42 2011] Mean detx,y = (341.87, -262.13) 
[Mon Nov 28 09:10:46 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 09:17:32 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 09:17:32 2011] Setting source spectrum file to fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Nov 28 09:17:32 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Nov 28 11:53:50 2011] Updating aperture counts using extracted products
[Mon Nov 28 11:53:50 2011] Error reading totcts from fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Nov 28 11:53:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 11:53:52 2011] Using photon index=1.80, rate=0.282, arf fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src2.arf
[Mon Nov 28 11:53:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 11:53:52 2011] Updating source flux to 2.6e-12
[Mon Nov 28 11:54:53 2011] Reading fit data from xmm0506200301/analysis//spectral/fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src2_pl.csv
[Mon Nov 28 11:54:53 2011] Spectral fit parameter nH value = 8.55535e+20
[Mon Nov 28 11:54:53 2011] Spectral fit parameter PhoIndex value = 4.1491
[Mon Nov 28 11:54:53 2011] Failed to get F(0.3-8.0) from xmm0506200301/analysis//spectral/fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Nov 28 11:54:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 11:54:53 2011] Using Nh = 8.6e+20, photon index=4.15, rate=0.282, arf fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src2.arf
[Mon Nov 28 11:54:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 11:54:54 2011] Updating source flux to 1.8e-12