[Sun Nov 27 22:52:53 2011] Detection parameters:
  Position = (201.4, 371.0) = 7 9 23.99 -49 29 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.9 +/- 13.6
  Background counts = 15.7
  Rate = 0.004 +/- 0.0006

[Sun Nov 27 22:52:54 2011] Off-axis axis estimate = 8.79'
[Mon Nov 28 00:36:51 2011] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 00:36:51 2011] Initial guess for spatial extent in simple fitting = 10.82"
[Mon Nov 28 00:36:51 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Mon Nov 28 00:36:51 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 10.82"
[Mon Nov 28 01:31:35 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src4.ximg exists
[Mon Nov 28 01:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src4.csv
[Mon Nov 28 01:31:35 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Nov 28 01:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src4.csv
[Mon Nov 28 01:31:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 01:31:36 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Nov 28 01:31:36 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Nov 28 01:31:36 2011] Fit fullrun_mos1_xmm0506200301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Nov 28 03:21:42 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.797403 pixels away
[Mon Nov 28 03:21:42 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 03:21:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 03:21:42 2011] Assessing source extent using major
[Mon Nov 28 03:21:42 2011] Source does appear to be extended
[Mon Nov 28 03:21:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 04:43:15 2011] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Mon Nov 28 04:43:15 2011] Initial guess for spatial extent in simple fitting = 10.82"
[Mon Nov 28 04:43:15 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Mon Nov 28 04:43:15 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 10.82"
[Mon Nov 28 05:34:53 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src4.ximg exists
[Mon Nov 28 05:34:53 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src4.csv
[Mon Nov 28 05:34:53 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Nov 28 05:34:53 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src4.csv
[Mon Nov 28 05:34:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Nov 28 05:34:53 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Nov 28 05:34:53 2011] fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Nov 28 05:34:53 2011] Fit fullrun_mos1_xmm0506200301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Nov 28 06:43:37 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.145753 pixels away
[Mon Nov 28 06:43:37 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 06:43:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 06:43:37 2011] Assessing source extent using major
[Mon Nov 28 06:43:37 2011] Source does appear to be extended
[Mon Nov 28 06:43:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 09:10:30 2011] XMMSAS src. selection expression = ellipse(17471.301559, 32232.466614, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 09:10:30 2011] Writing source region out to fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src13_src.reg
[Mon Nov 28 09:10:30 2011] Extracting stamp from image fullrun_mos1_xmm0506200301_pi300-10000_cl_sm2.00.img.gz, (164, 334) - (239, 409)
[Mon Nov 28 09:10:30 2011] XMMSAS bgd. selection expression = annulus(17471.301559, 32232.466614, 1087.500000, 2175.000000, X, Y)
[Mon Nov 28 09:10:30 2011] Writing fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src13.gif
[Mon Nov 28 09:19:04 2011] Mean detx,y = (8754.77, -4253.23) 
[Mon Nov 28 09:19:06 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 09:19:28 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 09:19:29 2011] Setting source spectrum file to fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Nov 28 09:19:29 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Nov 28 11:01:16 2011] Not generating rmf since there are only 99 counts
[Mon Nov 28 11:01:16 2011] rmf not generated due to insufficient counts
[Mon Nov 28 11:53:51 2011] Updating aperture counts using extracted products
[Mon Nov 28 11:53:51 2011] Error reading totcts from fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Nov 28 11:53:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 11:53:52 2011] Using photon index=1.80, rate=0.00438, arf fullrun_mos1_xmm0506200301_pi300-10000_pass1_cl_src13.arf
[Mon Nov 28 11:53:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 11:53:53 2011] Updating source flux to 7.3e-14
[Mon Nov 28 11:53:59 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting