[Fri Mar 16 10:46:04 2012] Detection parameters:
  Position = (295.7, 322.1) = 7 8 41.66 -49 33 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6342.4 +/- 94.7
  Background counts = 29.3
  Rate = 0.2 +/- 0.002

[Fri Mar 16 10:46:05 2012] Off-axis axis estimate = 1.73'
[Fri Mar 16 12:47:50 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 12:47:50 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Mar 16 12:47:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri Mar 16 12:47:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Mar 16 13:36:31 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 16 13:36:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 13:36:31 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 16 13:36:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 13:36:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 13:36:31 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 16 13:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar 16 13:36:31 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 16 13:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar 16 13:36:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 13:36:48 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.367011 pixels away
[Fri Mar 16 13:36:48 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 13:36:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 13:36:48 2012] Assessing source extent using major
[Fri Mar 16 13:36:48 2012] Source does appear to be extended
[Fri Mar 16 13:36:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 15:46:51 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 15:46:51 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Mar 16 15:46:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri Mar 16 15:46:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Fri Mar 16 16:22:44 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 16 16:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 16:22:44 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 16 16:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 16:22:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 16:22:45 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 16 16:22:45 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 16 16:22:45 2012] Fit fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 16 16:23:04 2012] Spatial fit model total counts = 5936.200000, observed total counts = 5769.000000
[Fri Mar 16 16:23:04 2012] Offset between fit and detection position for source 2 = 0.185793 pixels
[Fri Mar 16 16:23:04 2012] 5980.190000 total counts/ 1684.570000 bgd. counts: snr = 104.660143
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.185793 pixels
  Position = (295.5, 322.1) = 7 8 41.75 -49 33 6.3
  Extent = 5.1 (5.0-5.2)", rotation angle = 0
  Source counts = 4295.6 +/- 77.3
  Background counts = 1684.6
  Rate = 0.1 +/- 0.002
[Fri Mar 16 16:23:04 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 16:23:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 16:23:04 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 16:23:04 2012] Source does appear to be extended
[Fri Mar 16 16:23:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 19:47:05 2012] Counts = 4295.620000, rescaling region sizes by 2.000000
[Fri Mar 16 19:47:05 2012] XMMSAS src. selection expression = ellipse(25661.257400, 27975.634800, 611.298018, 611.298018, 0.000000, X, Y)
[Fri Mar 16 19:47:05 2012] Writing source region out to fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src2_src.reg
[Fri Mar 16 19:47:05 2012] Extracting stamp from image fullrun_mos2_xmm0506200201_pi300-10000_cl_sm2.00.img.gz, (260, 287) - (331, 357)
[Fri Mar 16 19:47:05 2012] XMMSAS bgd. selection expression = annulus(25661.257400, 27975.634800, 2037.660059, 4075.320117, X, Y)
[Fri Mar 16 19:47:05 2012] Writing fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src2.gif
[Fri Mar 16 19:47:09 2012] Mean detx,y = (99.22, 136.65) 
[Fri Mar 16 19:47:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 19:47:35 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 19:47:35 2012] Setting source spectrum file to fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar 16 19:47:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Mar 16 20:05:38 2012] Updating aperture counts using extracted products
[Fri Mar 16 20:05:38 2012] Error reading totcts from fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Mar 16 20:05:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 20:05:40 2012] Using photon index=1.80, rate=0.106, arf fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src2.arf
[Fri Mar 16 20:05:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 20:05:40 2012] Updating source flux to 1.2e-12
[Fri Mar 16 20:06:38 2012] Reading fit data from xmm0506200201/analysis//spectral/fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src2_pl.csv
[Fri Mar 16 20:06:38 2012] Spectral fit parameter nH value = 1.28467e+21
[Fri Mar 16 20:06:38 2012] Spectral fit parameter PhoIndex value = 5.07702
[Fri Mar 16 20:06:38 2012] Failed to get F(0.3-8.0) from xmm0506200201/analysis//spectral/fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 20:06:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 20:06:38 2012] Using Nh = 1.3e+21, photon index=5.08, rate=0.106, arf fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src2.arf
[Fri Mar 16 20:06:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 20:06:38 2012] Updating source flux to 8e-13