[Fri Mar 16 10:46:05 2012] Detection parameters:
  Position = (192.9, 479.8) = 7 9 27.42 -49 21 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.4 +/- 12.4
  Background counts = 24.0
  Rate = 0.001 +/- 0.0003

[Fri Mar 16 10:46:05 2012] Off-axis axis estimate = 15.21'
[Fri Mar 16 12:47:50 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 12:47:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 12:47:50 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Fri Mar 16 12:47:50 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.882
[Fri Mar 16 12:47:50 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 14.03"
[Fri Mar 16 13:36:31 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src17.ximg exists
[Fri Mar 16 13:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src17.csv
[Fri Mar 16 13:36:31 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Mar 16 13:36:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src17.csv
[Fri Mar 16 13:36:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 13:36:32 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Mar 16 13:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri Mar 16 13:36:32 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Mar 16 13:36:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri Mar 16 13:36:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 13:36:48 2012] Spatial fit model total counts = 528.799000, observed total counts = 365.000000
[Fri Mar 16 13:36:48 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 16 13:36:48 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 13:36:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 13:36:48 2012] Assessing source extent using major
[Fri Mar 16 13:36:48 2012] Source does appear to be extended
[Fri Mar 16 13:36:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 15:46:51 2012] Using EEF radius (= 14.03 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 15:46:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 15:46:51 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Fri Mar 16 15:46:51 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.882
[Fri Mar 16 15:46:51 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 14.03"
[Fri Mar 16 16:22:44 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src17.ximg exists
[Fri Mar 16 16:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src17.csv
[Fri Mar 16 16:22:44 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Mar 16 16:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src17.csv
[Fri Mar 16 16:22:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 16:22:45 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Mar 16 16:22:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Mar 16 16:22:45 2012] fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Mar 16 16:22:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Fri Mar 16 16:22:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506200201_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 16:23:04 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 18.503269 pixels away
[Fri Mar 16 16:23:04 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 16:23:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 16:23:04 2012] Assessing source extent using major
[Fri Mar 16 16:23:04 2012] Source does appear to be extended
[Fri Mar 16 16:23:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 19:47:05 2012] XMMSAS src. selection expression = ellipse(16734.990250, 41690.007538, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 19:47:05 2012] Writing source region out to fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src15_src.reg
[Fri Mar 16 19:47:05 2012] Extracting stamp from image fullrun_mos2_xmm0506200201_pi300-10000_cl_sm2.00.img.gz, (155, 442) - (230, 517)
[Fri Mar 16 19:47:05 2012] XMMSAS bgd. selection expression = annulus(16734.990250, 41690.007538, 1087.500000, 2175.000000, X, Y) && !ellipse(17684.291040, 41164.497600, 404.675212, 404.675212, 0.000000, X, Y) && !ellipse(16204.013596, 40774.258728, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 19:47:05 2012] Writing fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src15.gif
[Fri Mar 16 19:52:08 2012] Mean detx,y = (-1526.55, 16333.57) 
[Fri Mar 16 19:52:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 19:52:40 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 19:52:40 2012] Setting source spectrum file to fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Mar 16 19:52:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Mar 16 20:04:07 2012] Not generating rmf since there are only 55 counts
[Fri Mar 16 20:04:07 2012] rmf not generated due to insufficient counts
[Fri Mar 16 20:05:39 2012] Updating aperture counts using extracted products
[Fri Mar 16 20:05:39 2012] Error reading totcts from fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Mar 16 20:05:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 20:05:40 2012] Using photon index=1.80, rate=0.00137, arf fullrun_mos2_xmm0506200201_pi300-10000_pass1_cl_src15.arf
[Fri Mar 16 20:05:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 20:05:40 2012] Updating source flux to 5.1e-14
[Fri Mar 16 20:06:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting