[Sat Dec 31 10:56:39 2011] Detection parameters:
  Position = (203.6, 350.5) = 3 35 53.42 53 12 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.6 +/- 18.0
  Background counts = 95.5
  Rate = 0.003 +/- 0.0005

[Sat Dec 31 10:56:39 2011] Off-axis axis estimate = 7.84'
[Sat Dec 31 11:02:44 2011] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 11:02:44 2011] Initial guess for spatial extent in simple fitting = 10.35"
[Sat Dec 31 11:02:44 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.905
[Sat Dec 31 11:02:44 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.35"
[Sat Dec 31 11:16:49 2011] fullrun_pn_xmm0506190101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Dec 31 11:16:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506190101_pi300-10000_cl_pass0_src3.csv
[Sat Dec 31 11:16:49 2011] fullrun_pn_xmm0506190101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Dec 31 11:16:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506190101_pi300-10000_cl_pass0_src3.csv
[Sat Dec 31 11:16:49 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506190101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506190101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 11:16:49 2011] fullrun_pn_xmm0506190101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Dec 31 11:16:49 2011] fullrun_pn_xmm0506190101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Dec 31 11:16:49 2011] Fit fullrun_pn_xmm0506190101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Dec 31 11:33:31 2011] Spatial fit model total counts = 428.503000, observed total counts = 439.000000
[Sat Dec 31 11:33:31 2011] Offset between fit and detection position for source 3 = 4.063412 pixels
[Sat Dec 31 11:33:31 2011] 477.111600 total counts/ 42.687600 bgd. counts: snr = 66.491012
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.063412 pixels
  Position = (199.9, 348.8) = 3 35 55.21 53 12 44.3
  Extent = 20.7 (20.6-20.7)", rotation angle = 0
  Source counts = 434.4 +/- 21.8
  Background counts = 42.7
  Rate = 0.02 +/- 0.001
[Sat Dec 31 11:33:31 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 11:33:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 11:33:31 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 11:33:31 2011] Source does appear to be extended
[Sat Dec 31 11:33:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 11:33:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 31 11:33:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 31 11:33:41 2011] Initial guess for spatial extent in simple fitting = 20.68"
[Sat Dec 31 11:33:41 2011] source mask rpix=4.8, npix_max = 110, mask sum = 72, frac = 0.652
[Sat Dec 31 11:33:41 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 20.68"
[Sat Dec 31 11:46:10 2011] fullrun_pn_xmm0506190101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Dec 31 11:46:10 2011] fullrun_pn_xmm0506190101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Dec 31 11:46:10 2011] Fit fullrun_pn_xmm0506190101_pi300-10000_cl_pass1_src3 appears to have run properly
[Sat Dec 31 11:46:11 2011] fullrun_pn_xmm0506190101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Dec 31 11:46:11 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506190101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Dec 31 11:46:11 2011] fullrun_pn_xmm0506190101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Dec 31 11:46:11 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0506190101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Dec 31 11:46:11 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506190101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506190101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 12:03:42 2011] Source 3 is offset by -3.466828 and -1.832954 pixels which is larger than
2 X fitted extent = 2.511467 x 3.066248, not incorporating fit results
[Sat Dec 31 12:03:42 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 12:03:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 12:03:42 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 12:03:42 2011] Source does appear to be extended
[Sat Dec 31 12:03:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 12:03:53 2011] XMMSAS src. selection expression = ellipse(17346.002000, 30300.833200, 1240.758036, 1240.758036, 0.000000, X, Y)
[Sat Dec 31 12:03:53 2011] Writing source region out to fullrun_pn_xmm0506190101_pi300-10000_pass1_cl_src3_src.reg
[Sat Dec 31 12:03:53 2011] Extracting stamp from image fullrun_pn_xmm0506190101_pi300-10000_cl_sm2.00.img.gz, (129, 278) - (271, 420)
[Sat Dec 31 12:03:53 2011] XMMSAS bgd. selection expression = annulus(17346.002000, 30300.833200, 2067.930060, 4135.860119, X, Y)
[Sat Dec 31 12:03:53 2011] Writing fullrun_pn_xmm0506190101_pi300-10000_pass1_cl_src3.gif
[Sat Dec 31 12:06:04 2011] Mean detx,y = (-10110.44, -1571.47) 
[Sat Dec 31 12:06:12 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 12:09:00 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 12:09:00 2011] Setting source spectrum file to fullrun_pn_xmm0506190101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 31 12:09:00 2011] Setting bgd. spectrum file to fullrun_pn_xmm0506190101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Dec 31 12:27:48 2011] Updating aperture counts using extracted products
[Sat Dec 31 12:27:48 2011] Error reading totcts from fullrun_pn_xmm0506190101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 31 12:27:48 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 12:27:48 2011] Using photon index=1.80, rate=0.024, arf fullrun_pn_xmm0506190101_pi300-10000_pass1_cl_src3.arf
[Sat Dec 31 12:27:48 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 12:27:48 2011] Updating source flux to 1.3e-13
[Sat Dec 31 12:27:52 2011] Flag b found in src. 3 procflags, skipping spectral fitting
[Sat Dec 31 12:28:27 2011] Reading fit data from xmm0506190101/analysis//spectral/fullrun_pn_xmm0506190101_pi300-10000_pass1_cl_src3_pl.csv
[Sat Dec 31 12:28:27 2011] Spectral fit parameter nH value = 1.89622e+21
[Sat Dec 31 12:28:27 2011] Spectral fit parameter PhoIndex value = 0.925606
[Sat Dec 31 12:28:27 2011] Failed to get F(0.3-8.0) from xmm0506190101/analysis//spectral/fullrun_pn_xmm0506190101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Dec 31 12:28:27 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 12:28:27 2011] Using Nh = 1.9e+21, photon index=0.93, rate=0.024, arf fullrun_pn_xmm0506190101_pi300-10000_pass1_cl_src3.arf
[Sat Dec 31 12:28:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 12:28:27 2011] Updating source flux to 3e-13