[Fri Feb 24 10:43:50 2012] Detection parameters:
  Position = (285.0, 304.2) = 11 11 6.33 66 49 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.3 +/- 16.6
  Background counts = 37.3
  Rate = 0.008 +/- 0.001

[Fri Feb 24 10:43:50 2012] Off-axis axis estimate = 1.06'
[Fri Feb 24 10:47:58 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 10:47:58 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Fri Feb 24 10:47:58 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Fri Feb 24 10:47:58 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 6.96"
[Fri Feb 24 12:11:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src20.ximg exists
[Fri Feb 24 12:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src20.csv
[Fri Feb 24 12:11:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Feb 24 12:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src20.csv
[Fri Feb 24 12:11:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 12:11:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Feb 24 12:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Feb 24 12:11:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Feb 24 12:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Feb 24 12:11:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 12:56:11 2012] Spatial fit model total counts = 662.345000, observed total counts = 855.000000
[Fri Feb 24 12:56:11 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Feb 24 12:56:11 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 12:56:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 12:56:11 2012] Assessing source extent using major
[Fri Feb 24 12:56:11 2012] Source does appear to be extended
[Fri Feb 24 12:56:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 12:56:30 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 12:56:30 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Fri Feb 24 12:56:30 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Fri Feb 24 12:56:30 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 6.96"
[Fri Feb 24 14:14:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src20.ximg exists
[Fri Feb 24 14:14:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Feb 24 14:14:34 2012] Fit fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src20 appears to have run properly
[Fri Feb 24 14:14:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Feb 24 14:14:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Feb 24 14:14:34 2012] Fit fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Feb 24 15:03:06 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 145.142070 pixels away
[Fri Feb 24 15:03:06 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.284406 pixels away
[Fri Feb 24 15:03:06 2012] Source 20 is offset by -1.800960 and -8.891537 pixels which is larger than
2 X fitted extent = 1.323269 x 1.323269, not incorporating fit results
[Fri Feb 24 15:03:06 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 25.153658 pixels away
[Fri Feb 24 15:03:06 2012] Source 20 is offset by 1.513525 and -7.243675 pixels which is larger than
2 X fitted extent = 6.348230 x 6.348230, not incorporating fit results
[Fri Feb 24 15:03:06 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 15:03:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 15:03:06 2012] Assessing source extent using major
[Fri Feb 24 15:03:06 2012] Source does appear to be extended
[Fri Feb 24 15:03:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 15:03:25 2012] XMMSAS src. selection expression = ellipse(24745.172485, 26412.974274, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 24 15:03:25 2012] Writing source region out to fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src20_src.reg
[Fri Feb 24 15:03:25 2012] Extracting stamp from image fullrun_pn_xmm0506130201_pi300-10000_cl_sm2.00.img.gz, (247, 267) - (322, 342)
[Fri Feb 24 15:03:25 2012] XMMSAS bgd. selection expression = annulus(24745.172485, 26412.974274, 1087.500000, 2175.000000, X, Y) && !ellipse(24278.224200, 27633.233800, 900.224026, 900.224026, 0.000000, X, Y) && !ellipse(23637.948000, 29174.816000, 1221.632035, 1221.632035, 0.000000, X, Y) && !ellipse(22966.986000, 28234.650000, 1231.528035, 1231.528035, 0.000000, X, Y) && !ellipse(25235.580292, 27961.310364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23538.182892, 27817.160858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25435.841187, 26544.145996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23751.098000, 25832.342000, 1137.400033, 1137.400033, 0.000000, X, Y)
[Fri Feb 24 15:03:25 2012] Writing fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src20.gif
[Fri Feb 24 15:23:24 2012] Mean detx,y = (-921.89, 147.50) 
[Fri Feb 24 15:23:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 15:23:58 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 15:23:59 2012] Setting source spectrum file to fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Feb 24 15:23:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri Feb 24 16:50:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 24 16:50:13 2012] rmf not generated due to insufficient counts
[Fri Feb 24 17:26:21 2012] Updating aperture counts using extracted products
[Fri Feb 24 17:26:21 2012] Error reading totcts from fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Feb 24 17:26:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 17:26:22 2012] Using photon index=1.80, rate=0.00754, arf fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src20.arf
[Fri Feb 24 17:26:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 17:26:22 2012] Updating source flux to 2e-14
[Fri Feb 24 17:26:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting