[Fri Feb 24 10:43:50 2012] Detection parameters:
  Position = (292.9, 305.7) = 11 11 0.48 66 49 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.3 +/- 12.1
  Background counts = 37.1
  Rate = 0.003 +/- 0.0008

[Fri Feb 24 10:43:50 2012] Off-axis axis estimate = 0.66'
[Fri Feb 24 10:47:58 2012] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 10:47:58 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Fri Feb 24 10:47:58 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Fri Feb 24 10:47:58 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 6.76"
[Fri Feb 24 12:11:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src18.ximg exists
[Fri Feb 24 12:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src18.csv
[Fri Feb 24 12:11:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Feb 24 12:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src18.csv
[Fri Feb 24 12:11:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 12:11:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Feb 24 12:11:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Feb 24 12:11:34 2012] Fit fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Feb 24 12:56:11 2012] Source 18 is offset by -6.290837 and 4.518552 pixels which is larger than
2 X fitted extent = 6.214299 x 6.214299, not incorporating fit results
[Fri Feb 24 12:56:11 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 12:56:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 12:56:11 2012] Assessing source extent using major
[Fri Feb 24 12:56:11 2012] Source does appear to be extended
[Fri Feb 24 12:56:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 12:56:30 2012] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 12:56:30 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Fri Feb 24 12:56:30 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Fri Feb 24 12:56:30 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 6.76"
[Fri Feb 24 14:14:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src18.ximg exists
[Fri Feb 24 14:14:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src18.csv
[Fri Feb 24 14:14:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Feb 24 14:14:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src18.csv
[Fri Feb 24 14:14:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 14:14:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Feb 24 14:14:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Feb 24 14:14:34 2012] Fit fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Feb 24 15:03:06 2012] Warning, spatial fit 18 centroid is now closest to src. 20
[Fri Feb 24 15:03:06 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 50.105000 pixels away
[Fri Feb 24 15:03:06 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 97.941509 pixels away
[Fri Feb 24 15:03:06 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 15:03:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 15:03:06 2012] Assessing source extent using major
[Fri Feb 24 15:03:06 2012] Source does appear to be extended
[Fri Feb 24 15:03:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 15:03:25 2012] XMMSAS src. selection expression = ellipse(25435.841187, 26544.145996, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 24 15:03:25 2012] Writing source region out to fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src18_src.reg
[Fri Feb 24 15:03:25 2012] Extracting stamp from image fullrun_pn_xmm0506130201_pi300-10000_cl_sm2.00.img.gz, (255, 268) - (330, 343)
[Fri Feb 24 15:03:25 2012] XMMSAS bgd. selection expression = annulus(25435.841187, 26544.145996, 1087.500000, 2175.000000, X, Y) && !ellipse(24278.224200, 27633.233800, 900.224026, 900.224026, 0.000000, X, Y) && !ellipse(23637.948000, 29174.816000, 1221.632035, 1221.632035, 0.000000, X, Y) && !ellipse(22966.986000, 28234.650000, 1231.528035, 1231.528035, 0.000000, X, Y) && !ellipse(25235.580292, 27961.310364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27502.218200, 27861.137400, 390.859254, 390.859254, 0.000000, X, Y) && !ellipse(23538.182892, 27817.160858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23751.098000, 25832.342000, 1137.400033, 1137.400033, 0.000000, X, Y) && !ellipse(24745.172485, 26412.974274, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 24 15:03:25 2012] Writing fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src18.gif
[Fri Feb 24 15:21:33 2012] Mean detx,y = (-635.02, 740.50) 
[Fri Feb 24 15:21:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 15:21:58 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 15:21:59 2012] Setting source spectrum file to fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Feb 24 15:21:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Feb 24 16:49:11 2012] Not generating rmf since there are only 47 counts
[Fri Feb 24 16:49:11 2012] rmf not generated due to insufficient counts
[Fri Feb 24 17:26:21 2012] Updating aperture counts using extracted products
[Fri Feb 24 17:26:21 2012] Error reading totcts from fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Feb 24 17:26:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 17:26:22 2012] Using photon index=1.80, rate=0.00302, arf fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src18.arf
[Fri Feb 24 17:26:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 17:26:22 2012] Updating source flux to 7.8e-15
[Fri Feb 24 17:26:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting