[Fri Feb 24 10:43:49 2012] Detection parameters:
  Position = (279.3, 318.0) = 11 11 10.49 66 50 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 772.5 +/- 34.9
  Background counts = 40.0
  Rate = 0.05 +/- 0.002

[Fri Feb 24 10:43:50 2012] Off-axis axis estimate = 1.98'
[Fri Feb 24 10:47:58 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 10:47:58 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Fri Feb 24 10:47:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.028
[Fri Feb 24 10:47:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.42"
[Fri Feb 24 12:11:33 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 24 12:11:33 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 24 12:11:33 2012] Fit fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Feb 24 12:11:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 12:11:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 12:11:34 2012] Fit fullrun_pn_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 12:56:11 2012] Spatial fit model total counts = 1690.190000, observed total counts = 1695.000000
[Fri Feb 24 12:56:11 2012] Offset between fit and detection position for source 1 = 0.348297 pixels
[Fri Feb 24 12:56:11 2012] 1713.100000 total counts/ 981.062000 bgd. counts: snr = 23.371436
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.348297 pixels
  Position = (279.6, 318.2) = 11 11 10.29 66 50 2.6
  Extent = 11.3 (10.0-12.7)", rotation angle = 0
  Source counts = 732.0 +/- 41.4
  Background counts = 981.1
  Rate = 0.05 +/- 0.003
[Fri Feb 24 12:56:11 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 12:56:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 12:56:11 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 12:56:11 2012] Source does appear to be extended
[Fri Feb 24 12:56:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 12:56:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 12:56:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 12:56:30 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Fri Feb 24 12:56:30 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Fri Feb 24 12:56:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.25"
[Fri Feb 24 14:14:33 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 24 14:14:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src1.csv
[Fri Feb 24 14:14:33 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 24 14:14:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src1.csv
[Fri Feb 24 14:14:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 14:14:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 24 14:14:34 2012] fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 24 14:14:34 2012] Fit fullrun_pn_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 24 15:03:06 2012] Warning, spatial fit 1 centroid is now closest to src. 14
[Fri Feb 24 15:03:06 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 15:03:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 15:03:06 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 15:03:06 2012] Source does appear to be extended
[Fri Feb 24 15:03:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 15:03:24 2012] XMMSAS src. selection expression = ellipse(24278.224200, 27633.233800, 675.168019, 675.168019, 0.000000, X, Y)
[Fri Feb 24 15:03:24 2012] Writing source region out to fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 24 15:03:24 2012] Extracting stamp from image fullrun_pn_xmm0506130201_pi300-10000_cl_sm2.00.img.gz, (241, 279) - (318, 357)
[Fri Feb 24 15:03:24 2012] XMMSAS bgd. selection expression = annulus(24278.224200, 27633.233800, 1125.280032, 2250.560065, X, Y) && !ellipse(27649.400800, 31036.299200, 1379.400040, 543.000016, 57.570125, X, Y) && !ellipse(23637.948000, 29174.816000, 1221.632035, 1221.632035, 0.000000, X, Y) && !ellipse(22966.986000, 28234.650000, 1231.528035, 1231.528035, 0.000000, X, Y) && !ellipse(25235.580292, 27961.310364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23538.182892, 27817.160858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25435.841187, 26544.145996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23751.098000, 25832.342000, 1137.400033, 1137.400033, 0.000000, X, Y) && !ellipse(24745.172485, 26412.974274, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 24 15:03:24 2012] Writing fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src1.gif
[Fri Feb 24 15:03:34 2012] Mean detx,y = (42.31, -561.93) 
[Fri Feb 24 15:03:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 15:04:01 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 15:04:01 2012] Setting source spectrum file to fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 24 15:04:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 24 17:26:20 2012] Updating aperture counts using extracted products
[Fri Feb 24 17:26:20 2012] Error reading totcts from fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 24 17:26:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 17:26:21 2012] Using photon index=1.80, rate=0.0487, arf fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src1.arf
[Fri Feb 24 17:26:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 17:26:21 2012] Updating source flux to 1.3e-13
[Fri Feb 24 17:29:14 2012] Reading fit data from xmm0506130201/analysis//spectral/fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 24 17:29:14 2012] Spectral fit parameter nH value = 8.6127e+20
[Fri Feb 24 17:29:14 2012] Spectral fit parameter PhoIndex value = 2.31311
[Fri Feb 24 17:29:14 2012] Failed to get F(0.3-8.0) from xmm0506130201/analysis//spectral/fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 24 17:29:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 17:29:14 2012] Using Nh = 8.6e+20, photon index=2.31, rate=0.0487, arf fullrun_pn_xmm0506130201_pi300-10000_pass1_cl_src1.arf
[Fri Feb 24 17:29:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 17:29:14 2012] Updating source flux to 1.1e-13