[Fri Feb 24 10:45:04 2012] Detection parameters:
  Position = (157.6, 348.1) = 11 12 40.40 66 52 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.6 +/- 10.8
  Background counts = 17.3
  Rate = 0.002 +/- 0.0004

[Fri Feb 24 10:45:04 2012] Off-axis axis estimate = 10.83'
[Fri Feb 24 12:29:19 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 12:29:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 12:29:19 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Fri Feb 24 12:29:19 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.011
[Fri Feb 24 12:29:19 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.84"
[Fri Feb 24 12:56:03 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src10.ximg exists
[Fri Feb 24 12:56:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src10.csv
[Fri Feb 24 12:56:03 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Feb 24 12:56:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src10.csv
[Fri Feb 24 12:56:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 12:56:03 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Feb 24 12:56:03 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Feb 24 12:56:03 2012] Fit fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Feb 24 12:56:18 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.193900 pixels away
[Fri Feb 24 12:56:18 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 12:56:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 12:56:18 2012] Assessing source extent using major
[Fri Feb 24 12:56:18 2012] Source does appear to be extended
[Fri Feb 24 12:56:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 14:36:05 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:36:05 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Fri Feb 24 14:36:05 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.011
[Fri Feb 24 14:36:05 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.84"
[Fri Feb 24 15:02:59 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_src10.ximg exists
[Fri Feb 24 15:02:59 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Feb 24 15:02:59 2012] Fit fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri Feb 24 15:02:59 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Feb 24 15:02:59 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Feb 24 15:02:59 2012] Fit fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Feb 24 15:03:12 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.187019 pixels away
[Fri Feb 24 15:03:12 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 15:03:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 15:03:12 2012] Assessing source extent using major
[Fri Feb 24 15:03:12 2012] Source does appear to be extended
[Fri Feb 24 15:03:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 17:02:38 2012] XMMSAS src. selection expression = ellipse(13661.901367, 30237.243958, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 24 17:02:38 2012] Writing source region out to fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src6_src.reg
[Fri Feb 24 17:02:38 2012] Extracting stamp from image fullrun_mos2_xmm0506130201_pi300-10000_cl_sm2.00.img.gz, (120, 311) - (195, 386)
[Fri Feb 24 17:02:38 2012] XMMSAS bgd. selection expression = annulus(13661.901367, 30237.243958, 1087.500000, 2175.000000, X, Y)
[Fri Feb 24 17:02:38 2012] Writing fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src6.gif
[Fri Feb 24 17:06:23 2012] Mean detx,y = (1113.48, 11364.93) 
[Fri Feb 24 17:06:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 17:06:46 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 17:06:47 2012] Setting source spectrum file to fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Feb 24 17:06:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Feb 24 17:24:46 2012] Not generating rmf since there are only 53 counts
[Fri Feb 24 17:24:46 2012] rmf not generated due to insufficient counts
[Fri Feb 24 17:26:24 2012] Updating aperture counts using extracted products
[Fri Feb 24 17:26:24 2012] Error reading totcts from fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Feb 24 17:26:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 17:26:24 2012] Using photon index=1.80, rate=0.00211, arf fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src6.arf
[Fri Feb 24 17:26:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 17:26:24 2012] Updating source flux to 4.6e-14
[Fri Feb 24 17:26:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting