[Fri Feb 24 10:45:04 2012] Detection parameters:
  Position = (321.0, 219.1) = 11 10 39.86 66 42 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.1 +/- 10.0
  Background counts = 17.3
  Rate = 0.004 +/- 0.0007

[Fri Feb 24 10:45:04 2012] Off-axis axis estimate = 5.98'
[Fri Feb 24 12:29:19 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 12:29:19 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Fri Feb 24 12:29:19 2012] source mask rpix=2.2, npix_max = 28, mask sum = 35, frac = 1.232
[Fri Feb 24 12:29:19 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.42"
[Fri Feb 24 12:56:03 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Feb 24 12:56:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src5.csv
[Fri Feb 24 12:56:03 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Feb 24 12:56:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src5.csv
[Fri Feb 24 12:56:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 12:56:03 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Feb 24 12:56:03 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Feb 24 12:56:03 2012] Fit fullrun_mos2_xmm0506130201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Feb 24 12:56:18 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.446974 pixels away
[Fri Feb 24 12:56:18 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 12:56:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 12:56:18 2012] Assessing source extent using major
[Fri Feb 24 12:56:18 2012] Source does appear to be extended
[Fri Feb 24 12:56:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 14:36:05 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:36:05 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Fri Feb 24 14:36:05 2012] source mask rpix=2.2, npix_max = 28, mask sum = 35, frac = 1.232
[Fri Feb 24 14:36:05 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.42"
[Fri Feb 24 15:02:59 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Feb 24 15:02:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_src5.csv
[Fri Feb 24 15:02:59 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Feb 24 15:02:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_src5.csv
[Fri Feb 24 15:02:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 15:02:59 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Feb 24 15:02:59 2012] fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Feb 24 15:02:59 2012] Fit fullrun_mos2_xmm0506130201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Feb 24 15:03:12 2012] Spatial fit model total counts = 117.000000, observed total counts = 117.000000
[Fri Feb 24 15:03:12 2012] Offset between fit and detection position for source 4 = 0.123786 pixels
[Fri Feb 24 15:03:12 2012] 113.042300 total counts/ 74.792300 bgd. counts: snr = 4.422858
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.123786 pixels
  Position = (321.1, 219.2) = 11 10 39.79 66 42 51.9
  Extent = 5.1 (3.8-6.5)", rotation angle = 0
  Source counts = 38.2 +/- 10.6
  Background counts = 74.8
  Rate = 0.002 +/- 0.0005
[Fri Feb 24 15:03:12 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 15:03:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 15:03:12 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 15:03:12 2012] Source does appear to be extended
[Fri Feb 24 15:03:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 17:02:38 2012] XMMSAS src. selection expression = ellipse(27887.355740, 19018.208600, 305.544009, 305.544009, 0.000000, X, Y)
[Fri Feb 24 17:02:38 2012] Writing source region out to fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src4_src.reg
[Fri Feb 24 17:02:38 2012] Extracting stamp from image fullrun_mos2_xmm0506130201_pi300-10000_cl_sm2.00.img.gz, (304, 202) - (339, 237)
[Fri Feb 24 17:02:38 2012] XMMSAS bgd. selection expression = annulus(27887.355740, 19018.208600, 509.240015, 1018.480029, X, Y)
[Fri Feb 24 17:02:38 2012] Writing fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src4.gif
[Fri Feb 24 17:04:16 2012] Mean detx,y = (7063.46, -5744.65) 
[Fri Feb 24 17:04:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 17:04:34 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 17:04:34 2012] Setting source spectrum file to fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Feb 24 17:04:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Feb 24 17:23:45 2012] Not generating rmf since there are only 38 counts
[Fri Feb 24 17:23:45 2012] rmf not generated due to insufficient counts
[Fri Feb 24 17:26:23 2012] Updating aperture counts using extracted products
[Fri Feb 24 17:26:23 2012] Error reading totcts from fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Feb 24 17:26:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 17:26:24 2012] Using photon index=1.80, rate=0.00192, arf fullrun_mos2_xmm0506130201_pi300-10000_pass1_cl_src4.arf
[Fri Feb 24 17:26:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 17:26:24 2012] Updating source flux to 4.1e-14
[Fri Feb 24 17:26:27 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting